Domoticz

Posted: **Saturday 04 February 2017 21:45**

OS windows 10 pro x64
domoticz 3.5877
Controller Aeotec ZW090 Z-Stick Gen5
FIBARO System FGWPE Wall Plug (FGWPE/F-102)
From Z-waes Nodes it's node id 3 and 14

: dom1.png (28.81 KiB) Viewed 894 times

if we look at IDX 24 we can see here it's have kWh for this device

: dom2.png (15.28 KiB) Viewed 894 times

this is the second device and on this it's missing kWh info

: dom3.png (15.08 KiB) Viewed 894 times

I was running on a raspberry pi using Razberry as Z-wave controller
and both was working before I moved to Windows
I have also read data from both and compared them and they are same
What can I do fix this ?
any tips

Sven Åke

Posted: **Sunday 05 February 2017 11:38**

as you can see "49. Metering energy consumed by the Wall Plug itself:" is activated

: dom4.png (38.19 KiB) Viewed 887 times

Sven Åke

Posted: **Sunday 05 February 2017 11:43**

then look now in list it has pop up a new item in list long time after I add and updated setting
I don't know how or why

Sven Åke

Domoticz

2 FIBARO System FGWPE Wall Plug but diffrent on energy SOLVED

2 FIBARO System FGWPE Wall Plug but diffrent on energy SOLVED

Re: 2 FIBARO System FGWPE Wall Plug but diffrent on energy

Re: 2 FIBARO System FGWPE Wall Plug but diffrent on energy SOLVED