Domoticz

I built an RFLINK that works with RF 315Mhz, I already have another RFLINK built with 433Mhz that works very well for my weather station (DKW2012).

I just bought a remote control power system with 2 Outlets brand Prime Wire & Cable, working with 315Mhz according specification
https://fccid.io/QJX-TXTNRC


I try to get working with RFLINK 315mhz, but no change


For example, I use socket #3

I have with DEBUG ON for ON button :


20;05;DEBUG;Pulses=26;Pulses(uSec)=900,30,870,30,330,600,840,60,840,60,300,600,840,60,270,630,300,630,810,60,270,630,270,630,270,6990;
20;06;DEBUG;Pulses=50;Pulses(uSec)=840,150,210,690,210,690,780,120,210,690,750,150,750,150,210,720,180,720,180,720,180,720,720,180,720,180,720,180,150,750,690,210,690,210,120,780,660,240,120,780,120,780,660,240,90,810,90,780,90,6990;
20;07;Eurodomest;ID=069e25;SWITCH=05;CMD=ALLON;
20;08;DEBUG;Pulses=50;Pulses(uSec)=750,240,90,780,120,780,660,240,120,780,660,270,630,270,90,810,90,810,90,810,120,810,660,240,660,240,660,240,120,810,660,240,630,240,120,810,660,240,90,780,120,780,660,240,90,780,90,780,120,6990;
20;09;DEBUG;Pulses=32;Pulses(uSec)=240,750,150,750,690,210,690,210,690,210,150,750,690,210,690,210,150,750,690,210,150,750,150,750,690,180,150,750,150,750,150,6990;
20;0A;DEBUG;Pulses=50;Pulses(uSec)=810,180,180,720,180,720,720,180,180,720,720,180,720,180,150,720,180,720,180,720,180,720,720,180,720,180,720,180,150,750,720,180,720,180,180,720,720,180,180,720,180,720,720,180,180,720,180,720,180,6990;
20;0B;DEBUG;Pulses=28;Pulses(uSec)=270,720,750,150,750,150,750,150,180,720,720,180,720,150,210,720,720,150,180,720,180,720,750,150,180,720,180,6990;


with DEBUG OFF mode, i get


20;05;Eurodomest;ID=069e25;SWITCH=05;CMD=ALLON;




by not working with "command to send"




For OFF button




20;07;DEBUG;Pulses=36;Pulses(uSec)=360,570,330,570,330,570,360,540,870,0,870,30,870,30,300,600,840,60,840,60,300,630,840,60,270,630,840,60,270,630,270,630,270,630,270,6990;
20;08;DEBUG;Pulses=50;Pulses(uSec)=720,120,210,690,210,690,750,150,210,690,750,150,750,150,210,690,210,690,180,690,210,690,720,180,720,180,720,180,150,720,720,210,690,180,150,750,690,240,120,780,660,240,120,780,120,780,120,780,120,6990;
20;09;DEBUG;Pulses=28;Pulses(uSec)=330,270,630,300,600,300,60,840,600,300,600,270,60,840,600,300,60,840,600,300,60,840,60,840,60,840,60,6990;
20;0A;DEBUG;Pulses=28;Pulses(uSec)=30,240,600,240,600,240,60,780,600,240,600,240,90,750,600,240,90,750,600,240,120,780,120,780,120,780,120,6990;
20;0B;DEBUG;Pulses=50;Pulses(uSec)=780,210,150,750,150,750,690,210,150,750,690,210,690,210,150,750,150,750,150,750,150,750,690,210,690,210,690,210,120,780,690,210,690,210,150,750,690,210,150,750,690,210,150,750,150,750,150,750,150,6990;
20;0C;DEBUG;Pulses=28;Pulses(uSec)=330,180,720,180,720,180,180,720,720,180,720,180,180,720,720,180,180,720,720,180,180,720,180,720,180,720,180,6990;
20;0D;DEBUG;Pulses=24;Pulses(uSec)=750,150,150,690,690,150,660,180,150,690,660,180,150,690,690,150,150,690,180,720,180,720,180,6990;




With DEBUG OFF, I get
20;12;EV1527;ID=0961da;SWITCH=08;CMD=ON;




by not working with "command to send"




Why I have a difference between ON and OFF ?




How I can get the right protocol ?




Thanks in advance for the help