Timeout notification while using USB hub
Posted: Tuesday 20 December 2016 11:15
Hardware:
Aeon Labs Aeotec Gen 5 Z-Wave USB
Synology DS215J
Speedlink SNAPPY - Active USB Hub 4-Port (powered)
When I connect the Aeon Labs Aeotec Gen 5 Z-Wave USB directly in the USB2 port in de Synology NAS the device is working without any problems.
When I put the USB hub between it (Aeotec USB -> USB HUB -> Synology) the Aeotec USB is not working in Domoticz (the device is still blinking blue - orange - red)
Domoticz gives the following log:
I dont understand why. Can somebody explain it?
Aeon Labs Aeotec Gen 5 Z-Wave USB
Synology DS215J
Speedlink SNAPPY - Active USB Hub 4-Port (powered)
When I connect the Aeon Labs Aeotec Gen 5 Z-Wave USB directly in the USB2 port in de Synology NAS the device is working without any problems.
When I put the USB hub between it (Aeotec USB -> USB HUB -> Synology) the Aeotec USB is not working in Domoticz (the device is still blinking blue - orange - red)
Domoticz gives the following log:
Code: Select all
2016-12-20 10:52:50.621 OpenZWave: Version: 1.4-2282-gc286b14-dirty
2016-12-20 10:52:50.622 OpenZWave: using config in: /usr/local/domoticz/Config/
2016-12-20 10:52:51.692 OpenZWave: Received timeout notification from HomeID: 0, NodeID: 255 (0xff)
2016-12-20 10:52:52.702 OpenZWave: Received timeout notification from HomeID: 0, NodeID: 255 (0xff)
2016-12-20 10:52:53.712 OpenZWave: Received timeout notification from HomeID: 0, NodeID: 255 (0xff)
2016-12-20 10:52:58.747 OpenZWave: Received timeout notification from HomeID: 0, NodeID: 255 (0xff)
2016-12-20 10:52:59.760 OpenZWave: Received timeout notification from HomeID: 0, NodeID: 255 (0xff