Domoticz

hi all
i try to setup a Rfxcom on a ubuntu machine
Rfxcom is setuped with rfxmanager on a win machine ok

but
when i plug RFXCom a my ubuntu machine
it not seen as /dev/ttyusb0 device
i can see the following in Dmesg :

[ 1.023885] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 1.226432] usb 1-2: New USB device found, idVendor=0e0f, idProduct=0002
[ 1.226435] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.226437] usb 1-2: Product: VMware Virtual USB Hub
[ 1.232050] hub 1-2:1.0: USB hub found
[ 1.233174] hub 1-2:1.0: 7 ports detected
[ 1.482100] usb 1-1: new full-speed USB device number 3 using uhci_hcd
[ 1.625625] usb 1-1: New USB device found, idVendor=0403, idProduct=6001
[ 1.625627] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.625629] usb 1-1: Product: RFXtrx433
[ 1.625630] usb 1-1: Manufacturer: RFXCOM
[ 1.625631] usb 1-1: SerialNumber: A1LPSO4


the device is not seen as a /dev/ttyUSB0 ...
is there something to install as drivers etc??
any help will be welcome

thanks

Ubuntu virtalised in vmware?

yes but the same on raspberry pi with raspbian

I have used the RFXCom on raspberry pi since the start of Domoticz.
Try using the prepared sd card img.

hi
solved after a fresh reinstall of ubuntu
thanks