I received my FGD212 with Dimmer Bypass 2 today and i'm trying to get it to work with a tree-like light with 6 LED lights in it.
Problem is, when i try to turn the light on it starts to turn on from 1% to 50% in like 5 seconds and then turns off again, then it starts over again at 1% to 99% and turns off again. (It looks like some kind of calibration its trying to do)
Then, nothing... when i click the "On" again it does the same again.
I also tried it at some x-mas LED lights, same problem.
The x-mas Lights are 7.5 watts.
FGD-212 With LED lights
Moderator: leecollings
-
- Posts: 69
- Joined: Monday 08 August 2016 22:55
- Target OS: Linux
- Domoticz version: Stable
- Location: Netherlands, Alphen aan den Rijn
- Contact:
FGD-212 With LED lights
Over 50 Z-Wave Devices (Fibaro and Neo), 4xLogitech Hub, 2xPhilips Hue Bridge+55 Lights, 1x Nest Thermostat, 2xNetatmo Weather Station, 1xSkybell v1 Doorbell, 3 Kwikset KEVO Doorlocks and Domoticz running on a Intel NUC
- perwei
- Posts: 16
- Joined: Monday 13 February 2017 13:22
- Target OS: Linux
- Domoticz version: 2020.2
- Location: Hønefoss, Norway
- Contact:
Re: FGD-212 With LED lights
I know this is an old posting, but I've recently experienced the same behavior after replacing my 8 incandescent 40W bulbs with 4W LED bulbs.
Seems this occurs with irregular intervals followed by periods of stable light.
Anyone ?
Seems this occurs with irregular intervals followed by periods of stable light.
Anyone ?
Raspberry Pi 3/Raspbian GNU/Linux
Z-Wave.Me Razberry2 Z-Wave controller
3 x Aeotec ZW100 Multisensor 6
1 x Aeotec Smart Dimmer 6
2 x FIBARO System FGWPE Wall Plug
2 x FIBARO Dimmer 2 FGD-212
1 x FIBARO System FGK10x Door Sensor
1 x Popp Wall Controller
Z-Wave.Me Razberry2 Z-Wave controller
3 x Aeotec ZW100 Multisensor 6
1 x Aeotec Smart Dimmer 6
2 x FIBARO System FGWPE Wall Plug
2 x FIBARO Dimmer 2 FGD-212
1 x FIBARO System FGK10x Door Sensor
1 x Popp Wall Controller
Who is online
Users browsing this forum: No registered users and 0 guests