Page 1 of 1

Remote Temperature Sensor

Posted: Friday 01 July 2016 18:02
by Madasahatter
Hi,
This is my first post hear and a noob to all this so go easy

I'm running a Raspberry PI with Domoticz, after a week of head scratching and late nights finally I have made a working RFLink USB Gateway as detailed hear - http://www.nemcon.nl/blog2/ This is controlling my RF outlets fine, also there is a one wire temperature sensor connected to the PI's GPIO port controlling my heating.

So this is where I need help, I have some cheap Chinese 433mhz TX / RX x2 Arduino Uno's a DS18B20 Temperature Probe and a TMP36 temperature sensor.

I have no programming skills so its been a hard time just to get to where I am right now, thanks to Google.

So what I need if its at all possible is to build a remote temperature sensor / logger that connects to Domotics through the RFLink Gateway connected to my PI. I cannot seem to find any sketches / pinouts to help me

Please can someone help as I need to monitor the temperature I a different room to the PI.

Thanks in advance

Re: Remote Temperature Sensor

Posted: Friday 01 July 2016 18:47
by Madasahatter
this is it so far
IMG_0137.gif
IMG_0137.gif (196.21 KiB) Viewed 3312 times
IMG_0136.gif
IMG_0136.gif (199.41 KiB) Viewed 3310 times

Re: Remote Temperature Sensor

Posted: Friday 01 July 2016 21:05
by Madasahatter
From what I have been reading, looks like I'm going to have to add 2.4GHZ to this gateway as most wireless sensors use this.

What do you think ?

Just ordered some of these - 2.4GHz NRF24L01 Wireless Transceiver Module

Re: Remote Temperature Sensor

Posted: Thursday 07 July 2016 9:16
by mirasp
If you like DIY projects try this: https://www.mysensors.org/