Page 1 of 1
Difference between black and white Greenwave powernodes
Posted: Friday 17 June 2016 22:50
by Plantje
Quick question: what is the difference between the black and white power nodes from Greenwave? (Apart from the color of course
)
Re: Difference between black and white Greenwave powernodes
Posted: Friday 17 June 2016 23:34
by niceandeasy
Re: Difference between black and white Greenwave powernodes
Posted: Saturday 18 June 2016 8:34
by Plantje
Thank you for your reply, but perhaps you'd better read the f#cking question before giving an answer like this. I had already found that manual, but the only thing that is described is the difference between setting the wheel to either black or white. There is no mention of a technical difference between the black and white devices.
Re: Difference between black and white Greenwave powernodes
Posted: Monday 20 June 2016 1:50
by niceandeasy
You're right. I was out of line with my previous answer. I apologize for that.
I have been researching for a while for answering this question, because I'm not a Greenwave Powernode product specialist. I couldn't find any technical difference between the black and the white unit. It seems that the white unit is more widely available in webshops. That makes me think that GreenWave has been producing black ones in the past. If that's the case, the out-of-the-box firmware of the black ones might be older.
Re: Difference between black and white Greenwave powernodes
Posted: Monday 20 June 2016 13:35
by Plantje
So far it seems that the "new" ones that I bought are of the NS112-F type and the other ones that I have in my home are NS310-F. For the time begin I am able to get them connected, but (even after restart of the Domoticz machine) I can only see Watt and no WattHour.