Domoticz

Code: Select all

local Thermostat = 'Thermostat Kinderzimmer EG'
local Fensterkontakt = 'Fensterkontakt Kinderzimmer EG'

commandArray = {}
        if devicechanged[Fensterkontakt]=='On' then
                commandArray['Variable:Thermostat Kinderzimmer EG'] = otherdevices_svalues[Thermostat]
                commandArray[1]={['UpdateDevice']='28|0|15.0'}
        elseif devicechanged[Fensterkontakt]=='Off' then
                commandArray['UpdateDevice']='28|0|' .. tostring(uservariables['Thermostat Kinderzimmer EG'])
        end
return commandArray

Code: Select all

local Thermostat = 'Thermostat Wohnzimmer'

commandArray = {}
        if (devicechanged['Heizungssteuerung über Außentemperatur'] == 'On') then
                commandArray['Variable:Thermostat Wohnzimmer'] = otherdevices_svalues[Thermostat]         
                commandArray[1]={['UpdateDevice']='5|0|15'}         
        elseif (devicechanged['Heizungssteuerung über Außentemperatur'] == 'Off') then
                commandArray['UpdateDevice']='5|0|' .. tostring(uservariables['Thermostat Wohnzimmer'])         
        end
return commandArray

Code: Select all

2016-06-10 12:46:08.954 EventSystem: Script event triggered: script_variable_ht-wz.lua
2016-06-10 13:01:36.063 EventSystem: Script event triggered: script_device_ht-wz.lua
2016-06-10 13:11:07.139 EventSystem: Script event triggered: script_device_ht-wz.lua

Code: Select all

function SwitchWhenDiff(DeviceName, iCommand)
	-- retrieve current device status information
	local dstatus = otherdevices[DeviceName]
	local dvalue = tonumber(otherdevices_svalues[DeviceName])
	if dvalue == nil then
		dvalue = 0
	end
	if dstatus == nil then
		dstatus = "??"
	end
	--
	local Command = ""
	local Level = 0
	local Suffix = ""
	-- check for valid starting command to perform
	if string.sub(iCommand, 1, 2) == "On" then
		Command = "On"
		Level = 255
		Suffix = string.sub(iCommand, 4)
	elseif string.sub(iCommand, 1, 3) == "Off" then
		Command = "Off"
		Level = 0
		Suffix = string.sub(iCommand, 5)
	elseif string.sub(iCommand, 1, 9) == "Set Level" then
		Command = "Set Level"
		Level = tonumber(string.sub(iCommand, 11, 13))
		Suffix = string.sub(iCommand, 11)
	else
		-- unknown command exiting
		print("!###  SwitchWhenDiff Unknown command for DeviceName:" ..DeviceName .."|   iCommand:" .. iCommand .."|")
		return
	end
	-- ensure we don't have any nil values to avoid errors
	if Level == nil then
		Level = 0
	end
	if Suffix == nil then
		Suffix = ""
	end
	-- process information
	print("!###  SwitchWhenDiff DeviceName:" ..DeviceName .."|   iCommand:" .. iCommand .."|  Command:" .. Command .."|  NewLevel:" ..tostring(Level).. "|   Currentstatus:" ..dstatus .."|  value:" .. dvalue)
	if dstatus == nil then
		-- invalid switch found
		print(" ==>  Invalid switchname " .. DeviceName .. "  (" .. ScriptName .. ")")
	elseif (dstatus == Command and dstatus == "Set Level" and dvalue >= Level - 3 and dvalue <= Level + 3) then
		-- no change so don't do anything
		print(" ==>  Nothing to change for Dimmer (within margins +/-3) " .. DeviceName .. "  (" .. ScriptName .. ")")
	elseif (dstatus == Command and dstatus ~= "Set Level") then
		-- no change so don't do anything
		print(" ==>  Nothing to change for " .. DeviceName .. "  (" .. ScriptName .. ")")
	elseif (Command == "On" and dstatus == "Set Level" and dvalue >= 0) then
		-- no change so don't do anything: request an On command for Dimmer and it is already have a status of "Set Level" and percentrage GT 0
		print(" ==>  Nothing to change for dimmer " .. DeviceName .. "  (" .. ScriptName .. ")")
	else
		--
		print(" ==> Set " .. DeviceName .. " to:" .. iCommand .. "   inx=" .. #commandArray + 1 .. "  (" .. ScriptName .. ")")
		commandArray[#commandArray + 1] = {[DeviceName] = iCommand}
	end
	return
end