Page 1 of 1
Incorrect temperature reading above 25.5 degree. C Alecto WS3500
Posted: Sunday 08 May 2016 14:20
by svdstra
Hi, above 25.5 degree C the temperature reading of my Alecto WS3500 on domoticz (installed on raspberry pi) is multiplied by a factor of two to 51 degree. This looked repeatable last couple of days however.......... since today, may 8th 2016 12:15 the reading is around 41.3 degrees where the value of the Alecto weather station is 28.5 degrees.
Any idea?
Re: Incorrect temperature reading above 25.5 degree. C Alecto WS3500
Posted: Sunday 08 May 2016 17:42
by proza
Mine WS3500 Alecto temperature is working correct, highest temp. seen today 27,7 Stable version on Raspberry Pi
Verzonden vanaf mijn iPhone met Tapatalk
Re: Incorrect temperature reading above 25.5 degree. C Alecto WS3500
Posted: Sunday 08 May 2016 19:19
by sanderjstx
Same issue here, updated to 1002 firmware for 3500, which did not fix the issue (latest version from git under Ubuntu).
Re: Incorrect temperature reading above 25.5 degree. C Alecto WS3500
Posted: Sunday 08 May 2016 19:52
by b_weijenberg
will be corrected in the next RFXtrx firmware version
Re: Incorrect temperature reading above 25.5 degree. C Alecto WS3500
Posted: Saturday 20 May 2017 22:34
by Andries78
Hi everyone,
I have a alecto WS4500 and I came across this site against.
But the links that I found were unfortunately dead links.
Can anyone tell me how I can read the data from a ws4500 with a raspberry pi?
(I have found that the ws3500 and the ws4500 has use the same sensors?)
Thanks for the effort!
