But how do I get the status for a switch in Domoticz, from a Python script.
Regds
Get status in Python
Moderator: leecollings
-
Xroads
- Posts: 30
- Joined: Thursday 25 February 2016 10:43
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Get status in Python
This is probably very simple for those who know, unfortunately I'm not one of those
But how do I get the status for a switch in Domoticz, from a Python script.
Regds
But how do I get the status for a switch in Domoticz, from a Python script.
Regds
Raspberry pi 2
Razberry z-wave module with Fibaro dimmer, relay and pir and Dlink pir.
433mhz RFlink with 5 pcs. on/off switches
Razberry z-wave module with Fibaro dimmer, relay and pir and Dlink pir.
433mhz RFlink with 5 pcs. on/off switches
-
Toulon7559
- Posts: 859
- Joined: Sunday 23 February 2014 17:56
- Target OS: Raspberry Pi / ODroid
- Domoticz version: mixed
- Location: Hengelo(Ov)/NL
- Contact:
Re: Get status in Python
One possible way may be to apply the sValue reported for a switch.
See tab Settings, and then further downselect Options > Events > Show Current States
Next job is then to extract in a Python-script the selected sValue .....
See tab Settings, and then further downselect Options > Events > Show Current States
Next job is then to extract in a Python-script the selected sValue .....
Set1 = RPI-Zero+RFXCom433+S0PCM+Shield for BMP180/DS18B20/RS485+DDS238-1ZNs
Set2 = RPI-3A++RFLinkGTW+ESP8266s+PWS_WS7000
Common = KAKUs+3*PVLogger+PWS_TFA_Nexus
plus series of 'satellites' for dedicated interfacing, monitoring & control.
Set2 = RPI-3A++RFLinkGTW+ESP8266s+PWS_WS7000
Common = KAKUs+3*PVLogger+PWS_TFA_Nexus
plus series of 'satellites' for dedicated interfacing, monitoring & control.
Who is online
Users browsing this forum: No registered users and 1 guest