Question concerning a simple remote
Posted: Saturday 30 January 2016 0:50
Hi everybody,
(sorry for my english, I'm french)
I've got a very simple need : executing an action when pressing a key of my remote control.
The remote : PB-403R, Atlantic's
My RFXCOM USB433 detect it very well (Meiantech/Atlantic/Aidebao protocol)
In the "Switches" panel, I can observe that the 4 alarm buttons are well detected, and I can distinguish them easily : Panic, Disarm, Arm Home, Arm Away ->
But when I try to test which button has been pressed in blocky, this works :
but that DOESN'T works :
Could someone tell me why ?!
(same for "Arm Home" and "Panic" : it doesn't works. Only "Disarm" works)
I've been searching for several hours...
I've even tried Rfxmngr, which gaves me :
status = Group2 or Arm Away
and
status = Group1 or Disarm
for those two buttons.
(Packettype = Security1)
By the way (bonus question) I wonder where those strings ("Group2 or Arm Away" and "Group1 or Disarm") come from ? (what does the remote REALLY send ? Numbers ?) And how Domoticz interprets that as "Arm Away" and "Disarm" in the "Switches" tab.
So mysterious...
Thanks a lot for helping !
Yann
PS: configuration : RPi 2, RFXCOM USB433, AEON Zwave ZStick Gen5
(sorry for my english, I'm french)
I've got a very simple need : executing an action when pressing a key of my remote control.
The remote : PB-403R, Atlantic's
My RFXCOM USB433 detect it very well (Meiantech/Atlantic/Aidebao protocol)
In the "Switches" panel, I can observe that the 4 alarm buttons are well detected, and I can distinguish them easily : Panic, Disarm, Arm Home, Arm Away ->
- switches.png (23.75 KiB) Viewed 1081 times
- Sans titre-2.png (7.76 KiB) Viewed 1081 times
- Sans titre-3.png (8.18 KiB) Viewed 1081 times
(same for "Arm Home" and "Panic" : it doesn't works. Only "Disarm" works)
I've been searching for several hours...
I've even tried Rfxmngr, which gaves me :
status = Group2 or Arm Away
and
status = Group1 or Disarm
for those two buttons.
(Packettype = Security1)
By the way (bonus question) I wonder where those strings ("Group2 or Arm Away" and "Group1 or Disarm") come from ? (what does the remote REALLY send ? Numbers ?) And how Domoticz interprets that as "Arm Away" and "Disarm" in the "Switches" tab.
So mysterious...
Thanks a lot for helping !
Yann
PS: configuration : RPi 2, RFXCOM USB433, AEON Zwave ZStick Gen5