How to configure cheap sensors with PT2262
Posted: Wednesday 27 January 2016 13:16
The RFXtrx433 and RFXtrx433E transceivers are able to receive the PT2262.
The 3M3 oscillator resistor must be selected.
The PT2262 packets can be received in Lighting4 as a bit pattern but can also be received as an ARC On or Off packet if the PT2262 pins are configured as follows:
L=Low,
F=Floating (not connected),
H=High (not used)
The 3M3 oscillator resistor must be selected.
The PT2262 packets can be received in Lighting4 as a bit pattern but can also be received as an ARC On or Off packet if the PT2262 pins are configured as follows:
L=Low,
F=Floating (not connected),
H=High (not used)
Code: Select all
PT2262 A0 A1 A2 A3 housecode
L L L L A
F L L L B
L F L L C
F F L L D
L L F L E
F L F L F
L F F L G
F F F L H
L L L F I
F L L F J
L F L F K
F F L F L
L L F F M
F L F F N
L F F F O
F F F F P
PT2262 A4 A5 A6 A7 unitcode
L L L L 1
F L L L 2
L F L L 3
F F L L 4
L L F L 5
F L F L 6
L F F L 7
F F F L 8
L L L F 9
F L L F 10
L F L F 11
F F L F 12
L L F F 13
F L F F 14
L F F F 15
F F F F 16
PT2262 D3 D2 D1 D0
L F F F ON
L F F L OFF