Check, will look into it.bvduijv wrote:Please have a look at: viewtopic.php?f=37&t=8884&start=680#p75187RoadXY wrote:Setpoint has issues?bvduijv wrote:[I really would love to have the setpoint working without problems. And I do not see it on the issue list anymore. Could you please have a look at it?
KR, Bart
Could you please explain?
That would be very nice. Thanks in advance.RoadXY wrote:Check, will look into it.bvduijv wrote:Please have a look at: viewtopic.php?f=37&t=8884&start=680#p75187RoadXY wrote: Setpoint has issues?
Could you please explain?
No table MobileDevices in my db. Is this table created in runtime or is it depending on a certain version of Domoticz?RoadXY wrote:MobileDevicesceedebee wrote:Okay, installed the SQLiteExpert and I can browse the database (a backup file ). Which table is the registration ID supposed to be in?
I updated the server to the latest March stable - v3.4834 and it works after that.ceedebee wrote:No table MobileDevices in my db. Is this table created in runtime or is it depending on a certain version of Domoticz?RoadXY wrote:MobileDevicesceedebee wrote:Okay, installed the SQLiteExpert and I can browse the database (a backup file ). Which table is the registration ID supposed to be in?
You can suppress some notifications from the settings screenceedebee wrote:Updated yesterday, working now. But to many notifications, my fault. Need some more Lua programming.
Samsung gear doens't have Android Wear as his OS, but Tizen.Richard wrote:I bought the premium version, with the wear gadget, but I cannnot see the app on my Samsung wear watch. What do I wrong? I turnt the function on my Phone.
There is an option to show buttons instead of switches in the next versionRoadXY wrote:Because space is limited on your mobile (especially the 3,8" devices which we also support).marktn wrote:Update are comming fast, keep up the good work!
What is still do not understand is why do switches have only a on or off function.
Scenes do have both, i like to have that also for my switches. When the switch doesnt respond i have to switch double.
I am using kaku.
send from tapatalk app.
This isn't true - the Samsung Gear Live is an Android Wear watch - the LG G Watch and the Samsung Gear Live were the first 2 Android Wear watches available, and thus - are very cheap now to pick up from places like eBay. If this indeed a Samsung Gear Live and the app isn't showing up - you probably just need to resync apps in the Android Wear companion app on the phone.galadril wrote:Samsung gear doens't have Android Wear as his OS, but Tizen.Richard wrote:I bought the premium version, with the wear gadget, but I cannnot see the app on my Samsung wear watch. What do I wrong? I turnt the function on my Phone.
We support Android Wear....
This isn't true - the Samsung Gear Live is an Android Wear watch - the LG G Watch and the Samsung Gear Live were the first 2 Android Wear watches available, and thus - are very cheap now to pick up from places like eBay. [/quote]galadril wrote:Samsung Gear doens't have Android Wear as his OS, but Tizen.
galadril wrote: There is an option to show buttons instead of switches in the next version
At what range did you set you Geofence to?jisse44 wrote:Hello,
I have the current Play store premium version of the app, because I want to use the geofencing part. I have a Samsung S3 4G (Kitkat 4.4.4)
On domoticz server I created a Virtual switch On/Off connected on a Dummy hardware. Then I set a geofence for Home in the app.
When I enter the place, sometimes I have the notification and the button is turning On, sometimes I have to go in Parameters > Geofencing, and the app detects the place and I have the notification each time I go in the Parameters.
And when I left the place the switch never switched off, even if I go in Parameters > Geofencing.
When I enable Debug mode, I see the log in Parameters > Geofencing part (Starting Geofence service) each time. It seems that the service starts when I go in the Parameters, and stops as soon as I leave the menu.
And for my MySensors HVAC device set point from 4*C to 55*Cpiokuc wrote: For set temp should be from 4*C to 28*C. This is example for Danfoss thermostat. Now is from 10 to 30*C.
300 metersRoadXY wrote: At what range did you set you Geofence to?
It is about 40-80 meters, and 10-20 meters after 30 seconds.RoadXY wrote:If you disable GPS and reboot your device, how accurate is Google Maps to pinpoint your location?
Code: Select all
V/GeoSettingsActivity(13404): We have permission, let's go!
...
D/GEOFENCE(13404): Triggered entering a geofence location: Work
But when do you set your thermostat to below 10*C or above 30*C?pj-r wrote:And for my MySensors HVAC device set point from 4*C to 55*Cpiokuc wrote: For set temp should be from 4*C to 28*C. This is example for Danfoss thermostat. Now is from 10 to 30*C.
Currently I get 10 to 30*C
Could you create a video and PM that to me please?jisse44 wrote:300 metersRoadXY wrote: At what range did you set you Geofence to?
It is about 40-80 meters, and 10-20 meters after 30 seconds.RoadXY wrote:If you disable GPS and reboot your device, how accurate is Google Maps to pinpoint your location?
It's strange because whan I leave home, I switch on GPS for Waze, and when I returned in the evening, GPS is on with Waze too.
When I go in Geofence parameters, I must put the Lat/Long manually: when I push GET button, I have the "Could not find location, please try again" message.
And when I come back and I return in Geofence parameters, I have 'Enter in Work' notification each time.
In logcat, I have something like:Code: Select all
V/GeoSettingsActivity(13404): We have permission, let's go! ... D/GEOFENCE(13404): Triggered entering a geofence location: Work