Domoticz

gvrgvr wrote: ↑Tuesday 10 November 2020 21:28

bxlouis wrote: ↑Friday 29 November 2019 22:15

vamp wrote: ↑Thursday 17 January 2019 20:26 I thought I had the same problem, could not set the temperature of no more than two rooms.

It still looks like it but i have discovered that there is a twist. (program mistake?) As an example, when I change the manual setpoint from Domoticz of the bedroom, the setpoint of the living room changes, the setpoint of the bedroom remains at the old value. It seems read only but in the background a completely different / wrong room changes.

Someone who has this, or even better is there a solution?

re-adding the hardware does not solve anything

Exact same issue here, I noticed that in the "Devices" section of Domoticz, the setpoint which are inverted share almost the same "ID".
My bedroom has ID 000002E and my kitchen ID 0000002.
Not sure if it is linked to the issue but that's the only thing I see that could explain this behaviour.

Sadly, I cannot keep using the plugin due to this error and based on the thread activity, it seems that it is not maintained anymore

I have the exact same issue now I use multiple zones with Tado.

bxlouis wrote: ↑Tuesday 10 November 2020 21:50

gvrgvr wrote: ↑Tuesday 10 November 2020 21:28

bxlouis wrote: ↑Friday 29 November 2019 22:15

Exact same issue here, I noticed that in the "Devices" section of Domoticz, the setpoint which are inverted share almost the same "ID".
My bedroom has ID 000002E and my kitchen ID 0000002.
Not sure if it is linked to the issue but that's the only thing I see that could explain this behaviour.

Sadly, I cannot keep using the plugin due to this error and based on the thread activity, it seems that it is not maintained anymore

I have the exact same issue now I use multiple zones with Tado.

This issue is now fixed in the beta version of Domoticz. You can either update to the beta version or wait for the next stable release.

rjblake wrote: ↑Monday 30 April 2018 20:24 From what I've seen, the following 'Weather_State' can be returned (not sure if this is complete):

night_clear, night_cloudy, cloudy, cloudy_mostly, cloudy_partly, foggy, drizzle, scattered_rain, rain, snow, thunderstorms, sun, windy,

tonymer wrote: ↑Thursday 30 June 2022 16:31 Hello, I was thinking of buying this thermostat to control an air conditioner and be able to change settings or turn it off or on from home automation. Is this plugin working? Is it possible to do what I mentioned above?
Thanks in advance

Huntback wrote: ↑Monday 07 November 2022 18:57 Hello,
I have a Tado Wireless thermostat set which is wired to the internet, and works (incl. Smartphone and Tablet) without any problems.
I have linked the thermostat set as hardware in Domoticz environment in Docker.
Now after a few months of working without error messages, the following error messages have appeared in Domoticz since last Thursday 03-11-2022 15.15 hours, the thermostat in Domoticz has also stopped working since then.

2022-11-03 15:34:45.001 Status: Tado: Worker started. Will poll every 30 seconds.
2022-11-03 15:34:50.390 Status: Tado: Retrieved webapp environment from API.
2022-11-03 15:35:20.297 Error: Tado: Received token is zero length.
2022-11-03 15:35:50.746 Error: Tado: Received token is zero length.
2022-11-03 15:36:21.216 Error: Tado: Received token is zero length.
2022-11-03 15:36:51.655 Error: Tado: Received token is zero length.

I restarted the hardware in Domoticz that afternoon, but that doesn't give a solution so far.
Contact with Tado also does not provide a solution.
In an OpenHab environment in Docker that I temporarily set up, the Tado plugin (Binding/Thing) does work.
I use a password manager so it won't be due to incorrect credentials input.
I have already removed the Tado hardware in Domoticz, restarted Domoticz and added the Tado hardware again, unfortunately that also does not help and the error message comes up "Error: Tado: Received token is zero length." every 30 seconds.
Anyone have a solution for the Tado problem?
Thanks in advance.

bagheerahans wrote: ↑Thursday 22 December 2022 22:40 I wanted to share that the complexity of a password, for example generated by LastPass, can negate its acceptance in Domoticz. The 'no length' error remains. By removing the special character it worked immediately.