Domoticz

HansieNL wrote:Got it working. I did setup an event as you told me how to do and that works, but now I use the lua script from PD0SBH. The script also set the switch if setpoint is changed on Toon thermostat.
Thanks for helping.

MatthijsPH wrote:Did you complete all steps without any errors prior to running the script?
So Python and Git are installed on your NAS and you were able te clone the script from github and run setup.py without any errors?
Can you find files named toon.py + toon.pyc in the Python folder on your NAS (on my synology it's /lib/python2.7/site-packages and it's also in /lib/python2.7)?

I didn't read carefully the first time.

Code: Select all

ImportError: No module named requests

It seems that python module requests is not installed. I think the solution is posted here

 Traceback (most recent call last):
  File "toon2domoticz.py", line 15, in <module>
    from Toon import Toon
  File "/volume1/@appstore/domoticz/var/scripts/toon/Toon.py", line 6, in <module>
    import requests
ImportError: No module named requests
Endor> pip install requests
Requirement already satisfied (use --upgrade to upgrade): requests in /lib/python2.7/site-packages
Endor> 

gielie wrote: [...]
OK i got it, it seems that i had 2 versions of python running, one in @appstore and one in de lib/python2.7, its working now, tnks

wssmith wrote:I have Toon 'scenes' working using the 4 dummy switches and was looking how to get this working using a 'selector' switch. Has anyone got this working yet? Perhaps using this latest script with uservariable it is even easier?

kurniawan77 wrote:Yep

wssmith wrote:

kurniawan77 wrote:Yep

Cool! Care to explain how you did it? Does it just read the 'scene' when set on Toon itself or can it also be used to set the 'scene'?

Still struggling with my first selector switch to run ventilation 10 or 30 min. Not perfect yet, so not really attempted Toon selector yet.

if (ThermostatSetPoint == TemperatureHome) then
        --print("SetPoint equals Home temperature");
		if (otherdevices['Toon scenes'] ~= 'Home') then
		print("Updating Toon scenes selector to Home")
		commandArray['UpdateDevice']='idx|nValue|sValue'
end
return commandArray
--  nValue = 1 = on; sValue = Level (0,10,20,30...)

gdg16 wrote:I have used the script of MatthijsPH and it's working perfectly. I also made a selector switch with the json url's to control the Toon scenes. Now i want to control the Toon by using the below event. For the event i made an extra variable "ToonProgramEvent" to make sure the event isn't running continuously.

The problem is, the event script isn't updating the selector switch. Does anaybody know how to control the selector switch from the event? Do i need to use the level number of the selector switch or the name?

kurniawan77 wrote:

wssmith wrote:

kurniawan77 wrote:Yep

Cool! Care to explain how you did it? Does it just read the 'scene' when set on Toon itself or can it also be used to set the 'scene'?

Still struggling with my first selector switch to run ventilation 10 or 30 min. Not perfect yet, so not really attempted Toon selector yet.

The selectors gets updated by the Toon's setpoint (this also can be done by Toon2Domoticz) through lua script.

Code: Select all

if (ThermostatSetPoint == TemperatureHome) then
        --print("SetPoint equals Home temperature");
		if (otherdevices['Toon scenes'] ~= 'Home') then
		print("Updating Toon scenes selector to Home")
		commandArray['UpdateDevice']='idx|nValue|sValue'
end
return commandArray
--  nValue = 1 = on; sValue = Level (0,10,20,30...)

This way it doesn't execute the on action (if you have one) behind the switch. It does when you click on the switch/selector!

gielie wrote:

kurniawan77 wrote:

wssmith wrote: [...]
Im new with domoticz and i cant figure out how you have done this.
I have my Toon working and i created the 4 setpoints wich are switchable and the on/off status gets changed by a blocky event but i cant figure out how to create a selector like you did and the way it gets changed without executing the action.

could you explain more step by step for dummies like me how and what you did to get the selector working like you have.
Maybe you can put this info in the wiki.

MatthijsPH wrote:

gielie wrote:

kurniawan77 wrote:

Go to settings --> hardware
In the drop-down menu choose "Dummy (Does nothing, use for virtual switches only)" and name it any way you like (if you haven't already created dummy hardware).
You should now see your dummy hardware in de list above.
Click "create virtual sensor" and then pick "selector switch" at the bottom. Name it anyway you like, for instance ToonScenes.
You can find the new selector switch on the switches tab. Here you can edit the switch to meet your demands.

if (Room Setpoint == Huiskamer) then
        --print("SetPoint equals Home temperature");
      if (otherdevices['Toon scenes'] ~= 'Home') then
      print("Updating Toon scenes selector to Home")
      commandArray['UpdateDevice']='idx|nValue|sValue'
end
return commandArray
--  nValue = 1 = on; sValue = Level (0,10,20,30...)