Domoticz Community Forum - Support & Discussion

gizmocuz wrote: Tuesday 14 April 2026 7:33 But in the end it would be great is it was a stand-alone application like zigbee2mqtt / zwavejs-ui that works with MQTT Auto Discovery, with it's web interface to include/exclude nodes, etc.
That way it could work with other home automation systems as well.

gizmocuz wrote: Tuesday 14 April 2026 7:33 @fleinze
Great that communication part is working!
Do you also combine temp+hum / temp+hum+baro sensors? Energy+Power (kWh) sensors?

gizmocuz wrote: Tuesday 14 April 2026 7:33 I hope you are using Claude code to assist you. If yes, maybe you could include the project folder/CLAUDE.md file
If not, consider moving to Clause code (not the web page) asap and follow some youtube guides about coding and review agents

gizmocuz wrote: Tuesday 14 April 2026 7:33 Maybe also consider using type names, also easier for non developers

TypeDB = {
(0x0402,0x0000): {'DomoType': 'Temperature',     'Multiplier': 0.01},
(0x0405,0x0000): {'DomoType': 'Humidity',        'Multiplier': 0.01},
(0x0006,0x0000): {'DomoType': 'Switch',          'Multiplier': 1.}, # On/Off cluster
(0x003b,0x0001): {'DomoType': 'Switch',          'Multiplier': 1.}, # Switch cluster
(0x0045,0x0000): {'DomoType': 'Switch',          'Multiplier': 1.}, # boolean state cluster
(0x0008,0x0000): {'DomoType': 'Dimmer',          'Multiplier': 0.392},
(0x0090,0x0004): {'DomoType': 'Voltage',         'Multiplier': 0.001},
(0x0090,0x0005): {'DomoType': 'Current (Single)','Multiplier': 0.001},
(0x0090,0x0008): {'DomoType': 'Usage',           'Multiplier': 0.001},
(0x0091,0x0001): {'DomoType': '113;0;0',         'Multiplier': 1.0},
}

gizmocuz wrote: Tuesday 14 April 2026 7:33 And if possible also a docker compose setup on your main readme as it is more easier (and practical) to use docker compose
(with a local data folder instead of the home directory)

gizmocuz wrote: Tuesday 14 April 2026 7:33 How are you c++ skills? As it might be useful to have this natively in Domoticz (also for QR code related stuff), I know someone is already looking into this (and supporting MQTT-AD), but I think it can be easily done natively as well
I will create a C++ websocket client that Domoticz hardware can easily use (currently it is only build into libwebem and python)

fleinze wrote: Friday 17 April 2026 23:10 @gizmocuz
of course I will work on the c++ Matter integration from now on. Just sent the first small PR because commands did not work in my setup.

Some thought after my first look:
The Ikea remote does not work because they need cluster 59 / attribute 1. Should be an easy addon, I can do this if you want.
The battery percentage is updated on my temperature sensor, but not on my water leak sensor (binary cluster).
I think it would be great if the json attribute "available" from server is used to set devices as timed out.

BartSr wrote: Sunday 19 April 2026 12:23 Which tx/rx device (what is name? Coördinator?) is advised for matter?

• Apple TV

• Apple Homepod

• Google Nest Hub

• Amazon Echo dot

• Ikea dirigera (newest version)

• Home Assistant ZBT-2

• Openthread border router (ESP)

gizmocuz wrote: Sunday 19 April 2026 9:48 Yes I tested them all. (RGB/WW/CW)

Latest beta has some nice additions:
- Setup button next to the hardware in Domoticz
- Possible to include/exclude a node from within Domoticz
- Node list
- Neighbor list / graph

Basically how the deprecated Openzwave displayed