Domoticz

Posted: **Monday 23 December 2019 21:37**

dstewart275 wrote: ↑Monday 23 December 2019 17:56
Lokonli wrote: ↑Monday 23 December 2019 17:46 Then apparently the Docker image is not running correctly, at least not on port 8082.

Just to be sure, can you type the following in the Dashticz folder:
Code: Select all
	make stop
	make start
It stops the current Dashticz container, and restarts it again. It takes approx 1 minute. After start it reports the ip-adres:port.

The error page on 192.168.1.96/dashticz is not generated by the Docker container, but probably by some left overs from a previous manual install?
Thanks - here's the output from putty
Code: Select all
pi@raspberrypi:~ $ cd dashticz_v3
pi@raspberrypi:~/dashticz_v3 $ make stop
sudo docker stop dtv3
dtv3
sudo docker rm dtv3
dtv3
pi@raspberrypi:~/dashticz_v3 $ make start
Check for git
Installed...
sudo docker build -t dtv3 .
Sending build context to Docker daemon   66.8MB
Step 1/3 : FROM php:apache
 ---> c2dbfc2dd7fc
Step 2/3 : USER root
 ---> Using cache
 ---> f1f10f88a333
Step 3/3 : SHELL ["/bin/bash", "-c"]
 ---> Using cache
 ---> fd4d3dcf868d
Successfully built fd4d3dcf868d
Successfully tagged dtv3:latest
sudo docker run --name dtv3 -d -p 8082:80 --mount type=bind,source="/home/pi/dashticz_v3",target=/var/www/html dtv3
8505117725c350dc5a76a41b2c60445c110e6612c01d0e3903f8a88382e3b2bd
Dashticz is running at:
http://192.168.1.96:8082
http://172.17.0.1:8082
But still the same error on chrome....
Appreciate your efforts.

It seems you are not using the latest version of Dashticz.

Can you try the following in the Dashticz folder:

Code: Select all

make stop
git pull
make start

Posted: **Monday 23 December 2019 22:05**

I installed your script on a rpi 3b with the latest buster and updates...

after install an starting dashticz i get
Dashticz v3 is loading...

and a status check
sudo systemctl status docker

Code: Select all

● docker.service - Docker Application Container Engine
   Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled)
   Active: active (running) since Mon 2019-12-23 21:42:18 CET; 22min ago
     Docs: https://docs.docker.com
 Main PID: 458 (dockerd)
    Tasks: 22
   Memory: 100.6M
   CGroup: /system.slice/docker.service
           ├─ 458 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock
           └─1406 /usr/bin/docker-proxy -proto tcp -host-ip 0.0.0.0 -host-port 8082 -container-ip 172.17.0.2 -container-port 80

Dec 23 21:42:07 raspberrypi dockerd[458]: time="2019-12-23T21:42:07.328663400+01:00" level=warning msg="Your kernel does not support cgroup cfs quotas"
Dec 23 21:42:07 raspberrypi dockerd[458]: time="2019-12-23T21:42:07.329059858+01:00" level=warning msg="Your kernel does not support cgroup rt period"
Dec 23 21:42:07 raspberrypi dockerd[458]: time="2019-12-23T21:42:07.329473244+01:00" level=warning msg="Your kernel does not support cgroup rt runtime"
Dec 23 21:42:07 raspberrypi dockerd[458]: time="2019-12-23T21:42:07.330891213+01:00" level=info msg="Loading containers: start."
Dec 23 21:42:14 raspberrypi dockerd[458]: time="2019-12-23T21:42:14.338516252+01:00" level=info msg="Default bridge (docker0) is assigned with an IP address 172.17.0.0/16. Daemon option --bip can be used to set a preferred IP address"
Dec 23 21:42:15 raspberrypi dockerd[458]: time="2019-12-23T21:42:15.838210424+01:00" level=info msg="Loading containers: done."
Dec 23 21:42:18 raspberrypi dockerd[458]: time="2019-12-23T21:42:18.544590745+01:00" level=info msg="Docker daemon" commit=633a0ea graphdriver(s)=overlay2 version=19.03.5
Dec 23 21:42:18 raspberrypi dockerd[458]: time="2019-12-23T21:42:18.550188402+01:00" level=info msg="Daemon has completed initialization"
Dec 23 21:42:18 raspberrypi systemd[1]: Started Docker Application Container Engine.
Dec 23 21:42:18 raspberrypi dockerd[458]: time="2019-12-23T21:42:18.797993655+01:00" level=info msg="API listen on /var/run/docker.sock"

I removed docker with

sudo apt purge docker-ce

Posted: **Tuesday 24 December 2019 0:02**

Lokonli wrote: ↑Monday 23 December 2019 21:37 It seems you are not using the latest version of Dashticz.

Can you try the following in the Dashticz folder:
Code: Select all
make stop
git pull
make start

I have tried this and it reported it was Already up to date.
I started again with a completely fresh image of Buster (brought up to date) and tried the automatic install again. This time it just quits out to the login screen towards the end of the Make process. Make Stop now reports "No Rule to make target 'stop''
If anyone has any guidance please let me know!

Thanks

Posted: **Tuesday 24 December 2019 0:17**

dstewart275 wrote: ↑Tuesday 24 December 2019 0:02
Lokonli wrote: ↑Monday 23 December 2019 21:37 It seems you are not using the latest version of Dashticz.

Can you try the following in the Dashticz folder:
Code: Select all
make stop
git pull
make start
I have tried this and it reported it was Already up to date.
I started again with a completely fresh image of Buster (brought up to date) and tried the automatic install again. This time it just quits out to the login screen towards the end of the Make process. Make Stop now reports "No Rule to make target 'stop''
If anyone has any guidance please let me know!

Thanks

strange ... Are you sure you are in the dashticz folder?

If it's not working then switch to the manual install method.
https://dashticz.readthedocs.io/en/mast ... stall.html

Posted: **Tuesday 24 December 2019 1:04**

Lokonli wrote: ↑Tuesday 24 December 2019 0:17 strange ... Are you sure you are in the dashticz folder?

If it's not working then switch to the manual install method.
https://dashticz.readthedocs.io/en/mast ... stall.html

Manual install worked! Thanks for your time!

Posted: **Saturday 28 December 2019 11:35**

Hello,

I am new to Dashticz so forgive me if I am asking something stupid.
The installation of Dashticz succeeded but I am not able to connect to Domoticz.
Everytime I get the message there is something wrong with the CONFIG.js.
I have added three pictures to show my status of the installation.

Who can tell me what I am doing wrong....

Posted: **Saturday 28 December 2019 15:57**

Can you post your CONFIG.js from the custom folder?
It probably contains an error.

Sent from my SM-A320FL using Tapatalk

Posted: **Saturday 28 December 2019 16:08**

And you have to open Dashticz via the IP address and port as reported during install, like
192.168.2.15:8082
Or
192.168.2.21:8082

Sent from my SM-A320FL using Tapatalk

Posted: **Monday 30 December 2019 17:40**

Hi, I installed Dashticz with the automated script. Dashticz is installed in /home/pi/dev/dashticz. I am currently on 3.1.2 and would like to upgrade to 3.2.0 (or beta if need be).

How do I do that? I tried a few tips like

Code: Select all

pi@RPi3:~/dev/dashticz $ git pull
remote: Enumerating objects: 84, done.
remote: Counting objects: 100% (84/84), done.
remote: Compressing objects: 100% (3/3), done.
remote: Total 124 (delta 82), reused 82 (delta 81), pack-reused 40
Receiving objects: 100% (124/124), 186.52 KiB | 0 bytes/s, done.
Resolving deltas: 100% (91/91), completed with 31 local objects.
From https://github.com/Dashticz/dashticz
   7e4eea5..b702ea8  beta        -> origin/beta
 * [new branch]      evohome     -> origin/evohome
 * [new branch]      fixsecurity -> origin/fixsecurity
Already up-to-date.

and

Code: Select all

pi@RPi3:~/dev/dashticz $ git checkout beta
D	custom/CONFIG_DEFAULT.js
Branch beta set up to track remote branch beta from origin.
Switched to a new branch 'beta'
pi@RPi3:~/dev/dashticz $ git pull
Already up-to-date.

but was unsuccessful

Any tips?

TIA

Greetz,

Sjonnie

Posted: **Monday 30 December 2019 21:25**

It is already up to date

Sent from my SM-A320FL using Tapatalk

Posted: **Tuesday 31 December 2019 15:17**

Lokonli wrote: ↑Monday 30 December 2019 21:25 It is already up to date

Sent from my SM-A320FL using Tapatalk

Confusing

I am pretty sure a saw a listing there was a 3.2.0 and a 3.2.1 (released on December 12th). I was under the assumption the 3.2.0 was stable.

Found the listing: https://dashticz.readthedocs.io/en/beta ... notes.html. Silly me! The URL states beta. How could I have missed that

But if 3.2.0 is beta (as is 3.2.1). How do I upgrade to it when I installed using the script?

TIA

Greetz,

Sjonnie

Posted: **Tuesday 31 December 2019 18:22**

If you used the installation script, type the following in the Dashticz folder:

make beta

Or what also works for manual install:

git checkout beta

Sent from my SM-A320FL using Tapatalk

Posted: **Tuesday 31 December 2019 18:45**

Hi Lokonli,

Thanks for your reply and support. I think I am going to quit trying this year (which means for about 5 hours

) because this is what I get when I issue your commands:

Code: Select all

pi@RPi3:~ $ cd dev
pi@RPi3:~/dev $ cd dash*
pi@RPi3:~/dev/dashticz $ make beta
git checkout master
D	custom/CONFIG_DEFAULT.js
Switched to branch 'master'
Your branch is up-to-date with 'origin/master'.
pi@RPi3:~/dev/dashticz $

Gosh... I thought I had a tiny little bit of Linux experience. I am afraid this proves I don't

Tips are welcome!

Greetz,

Sjonnie

Posted: **Wednesday 01 January 2020 18:12**

O yes, sorry, I forgot there was a bug in the master branch with the make beta command.

Try:

git checkout beta
git pull

Sent from my SM-A320FL using Tapatalk

Posted: **Wednesday 01 January 2020 19:39**

Hi Lokonli,

Hmmm.... Weird....

Code: Select all

pi@RPi3:~/dev/dashticz $ git checkout beta
D	custom/CONFIG_DEFAULT.js
Switched to branch 'beta'
Your branch is up-to-date with 'origin/beta'.
pi@RPi3:~/dev/dashticz $ git pull
Already up-to-date.

And I am pretty sure I am on 3.1.2

I am at a loss here

Greetz,

Sjonnie

Posted: **Thursday 02 January 2020 9:15**

Can it be that you have another instance running of Dashticz? Which url do you use to open Dashticz?

To recreate and restart the Docker container type the following in the dev/dashticz folder:

make stop
make start

Make a note of the port number that will be reported at the end.

Sent from my SM-A320FL using Tapatalk

Posted: **Thursday 02 January 2020 12:39**

Hi Lokonli,

Nope, no other instance of Dashticz.

I recreated as you suggested and now I have 3.2.1. So success

Code: Select all

pi@RPi3:~/dev/dashticz $ make stop
Cleaning up dtv3-8082
Container dtv3-8082 exists
sudo docker stop dtv3-8082
dtv3-8082
sudo docker rm dtv3-8082
dtv3-8082
pi@RPi3:~/dev/dashticz $ ls
babel.config.js  dz_logo.png  Makefile           sounds
css              font         Makefile.ini       src
custom           img          nginx.conf         switch_horizon.php
custom_2         index2.html  package.json       themes
dist             index.html   package-lock.json  vendor
Dockerfile       js           README.md          version.txt
docs             lang         scripts            webpack.config.js
pi@RPi3:~/dev/dashticz $ make start
Checking container dtv3-8082
Checking port 8082
sudo docker build --build-arg tz="Europe/Amsterdam" -t dtv3-8082 .
Sending build context to Docker daemon  65.49MB
Step 1/4 : FROM php:apache
 ---> f2b49751e6a0
Step 2/4 : ARG tz="Europe/Amsterdam"
 ---> Using cache
 ---> 4cc88d942999
Step 3/4 : RUN printf "[PHP]\ndate.timezone = $tz\n" > /usr/local/etc/php/conf.d/tzone.ini
 ---> Using cache
 ---> e12bdcb7acb0
Step 4/4 : SHELL ["/bin/bash", "-c"]
 ---> Using cache
 ---> d49b2fcb097d
Successfully built d49b2fcb097d
Successfully tagged dtv3-8082:latest
sudo docker run  --restart unless-stopped -v /etc/localtime:/etc/localtime:ro  --name dtv3-8082 -d -p 8082:80 --mount type=bind,source="/home/pi/dev/dashticz",target=/var/www/html dtv3-8082
6642f57d87d3db9d1585a95fbfb0057bc27ccfb9eeb704ffc0a4c9b3240557cc

Dashticz is running at:
http://xxx.xxx.xxx.xxx:8082
http://172.17.0.1:8082
http://169.254.192.59:8082
pi@RPi3:~/dev/dashticz $

Thanks for your guidance!

Greetz,

Sjonnie

Posted: **Saturday 04 January 2020 17:29**

Hi,

The automatic installation went smoothly.
Two times one of the apache pulls was automatically re-downloaded and installed without any problems.

Code: Select all

. <(curl https://raw.githubusercontent.com/dashticzv3/dashticz_v3/beta/scripts/dashticz_install.sh )
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  3576  100  3576    0     0  33420      0 --:--:-- --:--:-- --:--:-- 33735
This is the installation script for Dashticz V3
The script will create a folder for Dashticz v3 in the following location:
/home/pi/Dashticz

Enter the folder name [dashticz_v3]: v3

Dashticz will be installed in
v3


Dashticz has a master branch (=stable) and a beta branch (=most up-to-date)
Which branch to install? [master]: yes
Please enter master or beta

Dashticz has a master branch (=stable) and a beta branch (=most up-to-date)
Which branch to install? [master]: beta

Now cloning the Dashticz repository https://github.com/dashticzv3/dashticz_v3

Cloning into 'v3'...
remote: Enumerating objects: 28, done.
remote: Counting objects: 100% (28/28), done.
remote: Compressing objects: 100% (22/22), done.
remote: Total 7123 (delta 10), reused 18 (delta 5), pack-reused 7095
Receiving objects: 100% (7123/7123), 29.30 MiB | 4.11 MiB/s, done.
Resolving deltas: 100% (4676/4676), done.
Checking out files: 100% (535/535), done.

Configuring Dashticz.

What is the IP:port address of your Domoticz server? (example: 192.168.178.18:8080): 192.168.178.2:8080                                      

Finding a free port for Dashticz
Port 8082 is NOT in use

Setting up Dashticz on port 8082


Let's install docker first
wget -qO- https://get.docker.com/ | sh
# Executing docker install script, commit: f45d7c11389849ff46a6b4d94e0dd1ffebca32c1
+ sudo -E sh -c apt-get update -qq >/dev/null
+ sudo -E sh -c DEBIAN_FRONTEND=noninteractive apt-get install -y -qq apt-transport-https ca-certificates curl >/dev/null
+ sudo -E sh -c curl -fsSL "https://download.docker.com/linux/raspbian/gpg" | apt-key add -qq - >/dev/null
Warning: apt-key output should not be parsed (stdout is not a terminal)
+ sudo -E sh -c echo "deb [arch=armhf] https://download.docker.com/linux/raspbian buster stable" > /etc/apt/sources.list.d/docker.list
+ sudo -E sh -c apt-get update -qq >/dev/null
+ [ -n  ]
+ sudo -E sh -c apt-get install -y -qq --no-install-recommends docker-ce >/dev/null
+ sudo -E sh -c docker version
Client: Docker Engine - Community
 Version:           19.03.5
 API version:       1.40
 Go version:        go1.12.12
 Git commit:        633a0ea
 Built:             Wed Nov 13 07:37:22 2019
 OS/Arch:           linux/arm
 Experimental:      false

Server: Docker Engine - Community
 Engine:
  Version:          19.03.5
  API version:      1.40 (minimum version 1.12)
  Go version:       go1.12.12
  Git commit:       633a0ea
  Built:            Wed Nov 13 07:31:17 2019
  OS/Arch:          linux/arm
  Experimental:     false
 containerd:
  Version:          1.2.10
  GitCommit:        b34a5c8af56e510852c35414db4c1f4fa6172339
 runc:
  Version:          1.0.0-rc8+dev
  GitCommit:        3e425f80a8c931f88e6d94a8c831b9d5aa481657
 docker-init:
  Version:          0.18.0
  GitCommit:        fec3683
If you would like to use Docker as a non-root user, you should now consider
adding your user to the "docker" group with something like:

  sudo usermod -aG docker pi

Remember that you will have to log out and back in for this to take effect!

WARNING: Adding a user to the "docker" group will grant the ability to run
         containers which can be used to obtain root privileges on the
         docker host.
         Refer to https://docs.docker.com/engine/security/security/#docker-daemon-attack-surface
         for more information.
Check for git
Installed...
sudo docker build -t dtv3 .
Sending build context to Docker daemon  66.63MB
Step 1/3 : FROM php:apache
apache: Pulling from library/php
c4f8e1e649d2: Pull complete
20b9b291ff1c: Pull complete
6aadbe9ebf42: Pull complete
af7f0f0a98e4: Pull complete
b9280131d10e: Pull complete
eb1816edc9dd: Pull complete
4cfad187f0b6: Pull complete
a92fbdca10d1: Pull complete
d31195020d4a: Pull complete
1aca3832e444: Pull complete
239ef133ad38: Pull complete
2d75199faf43: Pull complete
a19515b08b90: Pull complete
Digest: sha256:adeca522dc9cc66693e89ce95dc1a9480dc00bdc4e3b6caecffed13e2600296d
Status: Downloaded newer image for php:apache
 ---> 4635b7b028eb
Step 2/3 : USER root
 ---> Running in e009a7200cb1
Removing intermediate container e009a7200cb1
 ---> 91940f2426d4
Step 3/3 : SHELL ["/bin/bash", "-c"]
 ---> Running in b76ace6c49f3
Removing intermediate container b76ace6c49f3
 ---> a979785979a2
Successfully built a979785979a2
Successfully tagged dtv3:latest
sudo docker run --name dtv3 -d -p 8082:80 --mount type=bind,source="/home/pi/Dashticz/v3",target=/var/www/html dtv3
2bed28bc7e7a39ab8a205b0fb6ae7b2bf0b34a7868dfcd74c54af8c78eb1fe89
Dashticz is running at:
http://192.168.178.xxx:8082
http://192.168.178.xxx:8082
http://172.17.0.xxx:8082

Trying Domoticz IP...OK!
All done

pi@raspberrypi:~/Dashticz/v3 $

Dashticz v3.0.3 beta is installed on a Raspberry Pi 3 Model B
Domoticz 4.11590 runs on a Raspberry Pi 4 Model B

The configuration of the favorites in Domoticz is completely taken over on the Dashticz Desktop.

BR,
Walter.

Posted: **Friday 10 January 2020 14:47**

FYI: got a message in Dashticz that a new version was available (3.3.0). Used the following commands in /home/pi/dev/dashticz to upgrade:

Code: Select all

make stop
git pull
make start

Upgrade went smoothly so kudos to the dev(s)!!

Greetz,

Sjonnie

Posted: **Sunday 12 January 2020 8:33**

Spoiler: show

Woooow a hole new world opens up.. Updating Dashticz.

As i always consumed https://github.com/Dashticz/dashticz/releases is the url to check for new releases. Then i found out there is an other folder after the "twentemilieu" message from yesterday. https://dashticz.readthedocs.io/en/beta ... index.html And how to update was also a mystery to me. After i found this topic.

BUT. Why does everything to go perfect.

So i just trying a "make stop", for the first time. "sudo: docker: command not found" was the message.

Let's just try a "make start".

"Let's install docker first" nice, Dashticz is very keen to me.

After this, i also tried: make stop, git pull and make start.

No comes the not so nice part. I am still running version V3.1.2 master.

So i tried a "make beta" and "git checkout beta". But nothing happens. I am staying on V3.1.2.

Here is my history:

Code: Select all

user@pi:~/dashticz $ make beta
git checkout master
Already on 'master'
Your branch is up to date with 'origin/master'.
user@pi:~/dashticz $ make stop
Cleaning up dtv3-8082
Container dtv3-8082 exists
sudo docker stop dtv3-8082
dtv3-8082
sudo docker rm dtv3-8082
dtv3-8082
user@pi:~/dashticz $ git checkout beta
Branch 'beta' set up to track remote branch 'beta' from 'origin'.
Switched to a new branch 'beta'
user@pi:~/dashticz $ git pull
Already up to date.
user@pi:~/dashticz $ make start
Checking container dtv3-8082
Checking port 8082
sudo docker build --build-arg tz="Europe/Amsterdam" -t dtv3-8082 .
Sending build context to Docker daemon  64.77MB
Step 1/4 : FROM php:apache
 ---> 4635b7b028eb
Step 2/4 : ARG tz="Europe/Amsterdam"
 ---> Using cache
 ---> 7fcae1eb8428
Step 3/4 : RUN printf "[PHP]\ndate.timezone = $tz\n" > /usr/local/etc/php/conf.d/tzone.ini
 ---> Using cache
 ---> 9ffa74333b2b
Step 4/4 : SHELL ["/bin/bash", "-c"]
 ---> Using cache
 ---> aa34ecb2b9b8
Successfully built aa34ecb2b9b8
Successfully tagged dtv3-8082:latest
sudo docker run  --restart unless-stopped -v /etc/localtime:/etc/localtime:ro  --name dtv3-8082 -d -p 8082:80 --mount type=bind,source="/home/user/dashticz",target=/var/www/html dtv3-8082
ed97ce53e616f64171715460d0e5eacf2fe77b982a1786bf70c6e9e95a17402f

Dashticz is running at:
http://192.168.1.xxx:8082
http://172.17.0.xxx:8082
user@pi:~/dashticz $

The different is: my dashticz folder is /home/pi/dashticz and Sjonnie it is /home/pi/dev/dashticz.

Some side note. Would you please make a decent upgrade instruction? https://dashticz.readthedocs.io/en/beta ... ading.html

Did i write a post half an our ago (check spoiler above), and trying to get an updated version.
With the right url and port: x.x.x.x:8082 given from the "make start" the browser still was saying version V3.1.2 master. I was reading the last posts from this topic another time. Another time checking my version in the browser. Cleared cache. And now it is telling Dashticz V3.3.0 beta. So the update DID go well.

Question is there a way to check version number in Linux and not browser? Because i don't trust the browser so good. With the make stop/start commands i didn't see a version number.

Domoticz

Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation

Re: Dashticz V3 - Automatic installation