Domoticz

Spoiler: show

#!/bin/bash

#presence_detection.sh

#script Presence detection for domoticz & Fritzbox v1.04
#created by g.j funcke - 4 feb 2019
#making use of fritzconnection url: https://pypi.org/project/fritzconnection/
#dependencies: lxml, jq and requests
#tested with: Fritzbox 7581 and Fritzbox Repeater 1750E should work with all routers who supporting TR-064 protocol.
#place fritzconnection.py and fritzhosts.py in same directory as this script.
#dont forget to change parameters router inside fritzconnection.py and activate TR-064 on router.
#standard debug information is on just set debug to false to disable it.
# if you have a repeater please specify ip below.


#setup device(s) change values here
mac_device1=94:65:2D:7D:DD:10
name_device1="OnePlus5-Kris"
mac_device2=64:A2:F9:B5:C0:02
name_device2="OnePlus-6T"
idxdevice1=672
idxdevice2=673

#setup router (http://fritz.box), repeater (Fritzbox repeater http://fritz.repeater) and domoticz change values
password_fritzbox=harddisk
host_fritzbox=192.168.178.1
#setup repeater, if you dont have any leave blank
host_repeater=192.168.178.77
#setup host domoticz
host_domoticz=192.168.178.99:8080

#set debug to true or false to see logging information, leave on when using for the first time.. you see some checks. Leave of after it works
enable_debug=true

#some styling
RED='\033[0;31m'
GREEN='\033[0;32m'
NC='\033[0m' # No Color

#current directory script
cwd=$(cd -P -- "$(dirname -- "$0")" && pwd -P)

#get current status of device(s) in domoticz

if [ "$enable_debug" == "true" ]; then
clear;
echo "------------------------------------------------------------"
echo "Presence detection for Domoticz using Fritzbox version 1.0.4"
echo "------------------------------------------------------------"
echo -e "\n check availability of fritzbox"
sleep 1;
if ping -c 1 $host_fritzbox &> /dev/null
then
echo -e "${GREEN} Fritzbox is available${NC} gives answer on ip $host_fritzbox \n"
else
echo -e "${RED} Error!!!! fritzbox is not available, check ip adress of variable host_fritzbox"
exit 1
fi

if [ -n "$host_repeater" ]; then
echo "check availability of repeater"

if ping -c 1 $host_repeater &> /dev/null
then
echo -e "${GREEN} Repeater is available${NC} gives answer on ip $host_repeater \n"
else
echo -e "${RED} Error!!!! Repeater is not available, check ip adress of host_repeater or leave empty is you dont have one${NC} "
exit 1
fi
fi

#Get status domoticz
status_domoticz_device1=$(curl 'http://'$host_domoticz'/json.htm?type=devices&rid='$idxdevice1 | jq -r [.result][][].Data)
status_domoticz_device2=$(curl 'http://'$host_domoticz'/json.htm?type=devices&rid='$idxdevice2 | jq -r [.result][][].Data)
else
status_domoticz_device1=$(curl -s 'http://'$host_domoticz'/json.htm?type=devices&rid='$idxdevice1 | jq -r [.result][][].Data)
status_domoticz_device2=$(curl -s 'http://'$host_domoticz'/json.htm?type=devices&rid='$idxdevice2 | jq -r [.result][][].Data)
fi

#get device status of devices in Router
echo "getting output router.. plz wait... " ;
output_device1=$(python $cwd/fritzhosts.py -i $host_fritzbox -p $password_fritzbox -d $mac_device1)
sleep 2;
output_device2=$(python $cwd/fritzhosts.py -i $host_fritzbox -p $password_fritzbox -d $mac_device2);
sleep 2;
status_router_device1=$(grep "NewActive : 1" <<<"$output_device1")
status_router_device2=$(grep "NewActive : 1" <<<"$output_device2")


#get device status of repeater
if [ -n "$host_repeater" ]; then
echo "getting output repeater..plz wait..." ;

output_extender_device1=$(python $cwd/fritzhosts.py -i $host_repeater -p $password_fritzbox -d $mac_device1)
sleep 2;
output_extender_device2=$(python $cwd/fritzhosts.py -i $host_repeater -p $password_fritzbox -d $mac_device2)
sleep 2;
status_extender_device1=$(grep "NewActive : 1" <<<"$output_extender_device1")
status_extender_device2=$(grep "NewActive : 1" <<<"$output_extender_device2")


if [ -z "$status_router_device1" ] && [ -z "$status_extender_device1" ]; then
# device is not active in router and not active in repeater so set it to off
status_router_device1="Off"
else
#device is active so we set variable to on

status_router_device1="On"
fi

if [ -z "$status_router_device2" ] && [ -z "$status_extender_device2" ]; then
# device is not active in router and not active in repeater so set it to off
status_router_device2="Off"
else
#device is active so we set variable to on

status_router_device2="On"
fi

#else if there is no repeater
else
if [ -z "$status_router_device1" ];then
# device is not active in router and not active in repeater so set it to off
status_router_device1="Off"
else
#device is active so we set variable to on

status_router_device1="On"
fi

if [ -z "$status_router_device2" ];then
# device is not active in router and not active in repeater so set it to off
status_router_device2="Off"
else
#device is active so we set variable to on

status_router_device2="On"
fi
fi



if [ "$enable_debug" == "true" ]; then
echo "output router $name_device1 = $output_device1"
echo "output router $name_device2 = $output_device2"
echo "-----------------------------------------------------"
if [ -n "$host_repeater" ]; then
echo "output repeater $name_device1 = $output_extender_device1"
echo "output repeater $name_device2 = $output_extender_device2"
echo "-----------------------------------------------------"
echo "status repeater $name_device1 = $status_extender_device1"
echo "status repeater $name_device2 = $status_extender_device2"
fi
echo "status router $name_device1 = $status_router_device1"
echo "status router $name_device2 = $status_router_device2"
echo "status in domoticz $name_device1 = $status_domoticz_device1"
echo "status in domoticz $name_device2 = $status_domoticz_device2"
fi




#now we compare the status of the router vs the status of domoticz

if [ "$status_router_device1" == "$status_domoticz_device1" ]; then
# both are simular so there is nothing to change.
echo $(date -u) "status router and domoticz for $name_device1 are simular, we do nothing"
else
#router status vs domoticz status are not equal we set domoticz status to router status.
#we change the value in domoticz
echo -e $(date -u)"status router is not simular to status domoticz. ${GREEN} We change status domoticz for $name_device1 to $status_router_device1 ${NC}"
wget -q --delete-after "http://$host_domoticz/json.htm?type=command&param=switchlight&idx=$idxdevice1&switchcmd=$status_router_device1" >/dev/null 2>&1

#we send logging information to domoticz
wget -q --delete-after "http://$host_domoticz/json.htm?type=command&param=addlogmessage&message=presence-detection-logging $name_device1 = $status_router_device1" >/dev/null 2>&1

fi


if [ "$status_router_device2" == "$status_domoticz_device2" ]; then
# both are simular so there is nothing to change.
echo $(date -u) "status router and domoticz for $name_device2 are simular, we do nothing"
else
#router status vs domoticz status are not equal we set domoticz status to router status.
echo -e $(date -u) "status router is not simular to status domoticz. ${GREEN} We change status domoticz for $name_device2 to $status_router_device2 ${NC}"
#we change the value in domoticz
wget -q --delete-after "http://$host_domoticz/json.htm?type=command&param=switchlight&idx=$idxdevice2&switchcmd=$status_router_device2" >/dev/null 2>&1

#we send logging information to domoticz
wget -q --delete-after "http://$host_domoticz/json.htm?type=command&param=addlogmessage&message=presence-detection-logging $name_device2 = $status_router_device2" >/dev/null 2>&1

fi

VHK17 wrote:Hello,

I have the settings ;

1.jpg

2.jpg

3.jpg

felix63 wrote: ↑Sunday 17 March 2019 21:51

Code: Select all

sudo apt-get install python jq python-lxml python-requests 
Reading package lists... Done
Building dependency tree       
Reading state information... Done
jq is already the newest version (1.5+dfsg-1.3).
python is already the newest version (2.7.13-2).
python-requests is already the newest version (2.12.4-1).
The following additional packages will be installed:
  libxslt1.1 python-bs4 python-html5lib python-webencodings
Suggested packages:
  python-genshi python-lxml-dbg python-lxml-doc
The following NEW packages will be installed:
  libxslt1.1 python-bs4 python-html5lib python-lxml python-webencodings
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 1,193 kB of archives.
After this operation, 4,561 kB of additional disk space will be used.

and some further fiddling with permissions to get things running.

funky wrote: ↑Saturday 16 March 2019 11:14 @felix63 and @prutsium. You are missing dependencies.

Indeed the script check of dependencies is not working, im now working on it to fix this.

Can you run the following command and report if something is installed? If it asked to install confirm with yes and reboot and re-run the script again

Code: Select all

 sudo apt-get install python jq python-lxml python-requests 

media@media-N61Vg:~/presence_detection_domoticz_fritzbox$ bash presence_detection.sh
checking:IPAD_JG
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  1895  100  1895    0     0  1850k      0 --:--:-- --:--:-- --:--:-- 1850k
Mo 18. Mär 07:56:25 UTC 2019 status router and domoticz for IPAD_JG are simular, we do nothing
checking:OP6T_JG
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  1901  100  1901    0     0  1856k      0 --:--:-- --:--:-- --:--:-- 1856k
Mo 18. Mär 07:56:31 UTC 2019 status router and domoticz for OP6T_JG are simular, we do nothing

Enter ip adres of fritzbox default:192.168.178.1  and press [ENTER]: