Page 3 of 13
Re: RE: Re: TOON died within Domoticz
Posted: Tuesday 18 October 2016 19:18
by jjnj
S4nd3r wrote:Support Eneco states this:
Wat werkt er nog niet
Om het risico op overbelasting zoveel mogelijk te beperken hebben we twee functies nog niet weer geactiveerd:
Domoticz: Domoticz gebruikers hebben continue een verbinding met ons service center (een mobiele app maar ongeveer één minuut) en geven daarom een relatief zeer grote belasting op onze servers. Om te voorkomen dat mobiele app gebruikers geen toegang krijgen vanwege deze kleine groep hebben we voorlopig de toegang voor jullie nog geblokkeerd.
Vergelijk functie: De vergelijk functie veroorzaakt bij ons een grote belasting op onze DNS servers. Omdat we verwachten dat klanten het functioneren van de mobiel app belangrijker vinden dan resultaten van de vergelijk functie, hebben we deze voor dit weekend uitgeschakeld. We verwachten begin deze week weer te kunnen activeren.
Dat is nou een van de redenen waarom het zo belangrijk is dat de Toon ook via het inerne netwerk uitgelezen moet kunnen worden ipv via hun servers.
Ik denk toch aan een andere thermostaat.
Re: TOON died within Domoticz
Posted: Tuesday 18 October 2016 19:27
by Plantje
No, not necessarily read the Toon, but also connect directly to the meter module. Both would be really great
Re: TOON died within Domoticz
Posted: Tuesday 18 October 2016 20:18
by bertbigb
On the Eneco forum I read that gizmocuz is involved in finding a solution together with the Toon developers.
Hopefully he can inform us a bit over the plans and progression and maybe a timepath.
After a week suffering with my domoticz and the toon I hope it will not take much longer anymore.
Does anyone of you have a suggestion for a good thermostat as replacement for the Toon?
Re: TOON died within Domoticz
Posted: Tuesday 18 October 2016 22:19
by HansieNL
bertbigb wrote:On the Eneco forum I read that gizmocuz is involved in finding a solution together with the Toon developers.
Hopefully he can inform us a bit over the plans and progression and maybe a timepath.
After a week suffering with my domoticz and the toon I hope it will not take much longer anymore.
Does anyone of you have a suggestion for a good thermostat as replacement for the Toon?
If I change my thermostat I would buy a ThermoSmart one.
Re: TOON died within Domoticz
Posted: Tuesday 18 October 2016 23:01
by Plantje
bertbigb wrote:On the Eneco forum I read that gizmocuz is involved in finding a solution together with the Toon developers.
Hopefully he can inform us a bit over the plans and progression and maybe a timepath.
After a week suffering with my domoticz and the toon I hope it will not take much longer anymore.
Does anyone of you have a suggestion for a good thermostat as replacement for the Toon?
What is the advantage of changing the thermostat? I can adjust the temperature with my
https://Toonopafstand.eneco.nl. I would think it is more useful if the Domoticz server can directly grab data from the P1. So: let Domoticz and Toon communicate over the local network if I want to.
Or perhaps allow my Domoticz machine to get data directly from the Eneco interface that is connected to the P1. As I understand it: the Eneco interface and the Toon communicate directly and the data is then sent to the service center. All apps get the data from the service center.
Re: TOON died within Domoticz
Posted: Wednesday 19 October 2016 8:58
by bertbigb
Plantje wrote:No, not necessarily read the Toon, but also connect directly to the meter module. Both would be really great
You can have a look at
https://www.slimmemeterkabel.nl/
With such a cable connected to your domoticz machine you can read the meter values directly. No need for Toon
Re: TOON died within Domoticz
Posted: Wednesday 19 October 2016 9:08
by bertbigb
Plantje wrote:bertbigb wrote:On the Eneco forum I read that gizmocuz is involved in finding a solution together with the Toon developers.
Hopefully he can inform us a bit over the plans and progression and maybe a timepath.
After a week suffering with my domoticz and the toon I hope it will not take much longer anymore.
Does anyone of you have a suggestion for a good thermostat as replacement for the Toon?
What is the advantage of changing the thermostat? I can adjust the temperature with my
https://Toonopafstand.eneco.nl. I would think it is more useful if the Domoticz server can directly grab data from the P1. So: let Domoticz and Toon communicate over the local network if I want to.
Or perhaps allow my Domoticz machine to get data directly from the Eneco interface that is connected to the P1. As I understand it: the Eneco interface and the Toon communicate directly and the data is then sent to the service center. All apps get the data from the service center.
I don't want to adjust the temperature with an app or what so ever. In my system I programmed a whole lot of logic how the temeperature should be depending on the stat of the household. So I need to be able to set a thermostat from within the domoticz program. Hope this answer your question.
Re: TOON died within Domoticz
Posted: Wednesday 19 October 2016 12:19
by gizmocuz
New beta (#5788)...
Re: TOON died within Domoticz
Posted: Wednesday 19 October 2016 13:07
by basst
gizmocuz wrote:New beta (#5788)...
Hi gizmocuz. Thanks!
But why is the official Toon API not used?
Check this page:
https://www.toonapi.com/documentation/t ... er-journey
Re: TOON died within Domoticz
Posted: Wednesday 19 October 2016 13:32
by gizmocuz
I do not own a Toon, just helping out...
Please feel free to implement it if this is needed and make a git pull request
Re: TOON died within Domoticz
Posted: Thursday 20 October 2016 7:19
by gizmocuz
Rome was not build in a day....
There is a new beta
Re: TOON died within Domoticz
Posted: Thursday 20 October 2016 7:54
by darkrain
gizmocuz wrote:Rome was not build in a day....
There is a new beta
Hi Gizmocuz, just installed the new beta and it looks good at first sight.
I really appreciate your work on this, thank you!
Re: TOON died within Domoticz
Posted: Thursday 20 October 2016 11:40
by basst
gizmocuz wrote:I do not own a Toon, just helping out...
Please feel free to implement it if this is needed and make a git pull request
Good work! Thank you!
Sorry, my C++ knowledge is not good enough for that..
Btw: Is it possible to update the Toon data when executing the "setPoint" action?
Re: TOON died within Domoticz
Posted: Thursday 20 October 2016 12:00
by gizmocuz
It should be updated within ~ 30 seconds
Re: TOON died within Domoticz
Posted: Thursday 20 October 2016 12:16
by basst
gizmocuz wrote:It should be updated within ~ 30 seconds
Sorry, my sourcecode was not up-to-date.
Thanks!
Re: TOON died within Domoticz
Posted: Friday 21 October 2016 7:23
by Plantje
Ah ok...
Just installed the latest beta....unfortunately it looks like it's still not really polling my Toon data ☹
Re: TOON died within Domoticz
Posted: Friday 21 October 2016 9:52
by rjblake
Plantje wrote:Ah ok...
Just installed the latest beta....unfortunately it looks like it's still not really polling my Toon data ☹
Same here. Interesting part if that it was working until around 19:00 last night and then started to generate errors. From my error log:
2016-10-21 08:41:21.653 Error: ToonThermostat: Error getting current state!
2016-10-21 08:47:05.439 Error: ToonThermostat: Error getting current state!
2016-10-21 08:48:32.888 Error: CheckAuthToken(831a....[removed detail]....) : session id not found
In addition, I tried to login to the Toon app this morning, and it told me that I could not login in as 4 devices were already logged in. I wonder if Eneco has made yet another 'fix' somewhere that has caused this problem. I can change my Setpoint & Off/Away/Sleeping/Home/Comfort which all still seem to work, just cannot get any meter readings from either electric or gas
Re: TOON died within Domoticz
Posted: Friday 21 October 2016 10:10
by Plantje
Toonopafstand.eneco.nl doesn't work anymore either!
Eneco: fix that sh*t! I will check in on their forum again as well.
Re: TOON died within Domoticz
Posted: Friday 21 October 2016 10:15
by gizmocuz
Please stay nice....
Re: TOON died within Domoticz
Posted: Friday 21 October 2016 10:23
by Plantje
I will
I just cannot comprehend Eneco developers using the Production environment as one large beta.... I think the first focus now should be on rolling back some of the updates and start building stuff again from there.