Domoticz

1. The version of plugin.py and tradfri.tac now are the same for both stable and beta versions of domoticz. No more matching master branch with stable domoticz and development branch for beta domoticz, the master branch is where it's at (At least until, if ever, the python framework changes it's API again in such a manner that a unified plugin.py is not maintainable).
2. As a result of this, the default branch for the plugin has changed back to master, which should be suitable for most users.
3. The handling of ident/psk has changed for stable domoticz. The adapter need to be configured from the command-line

   Code: Select all

   $ ./configure.py GATEWAY_IP GATEWAY_MASTER_KEY 

   and the settings for the IKEA-plugin on the hardware-page needs to be updated, as described in the readme
4. Stable domoticz now have support for the IKEA-sockets.

Mambobuzzz wrote: ↑Saturday 20 October 2018 18:11 Hi there,

is it worth installing on Windnows Domoticz? Is it stable?

htilly wrote: ↑Tuesday 23 October 2018 20:21 Probably stupid question but here it goes.
For the IKEA trådfri lamps.. do I really need to buy an additional remote / dimmer for each lamp? I know it makes sense when you use it as intended =) But when controlling them from domoticz I couldn't care less about the remote.. and the cost..

So I guess the question is:
Is there any way of getting multiple light bulbs in domoticz with just one remote?

BR
Tilly

jakkes72 wrote: ↑Thursday 25 October 2018 20:47 I tried to install this plugin according this link:
https://github.com/moroen/IKEA-Tradfri-plugin


Everything goes fine till i enter this command:
pi@Domoticz:~/domoticz/plugins/IKEA-Tradfri $ sudo ./configure.py 10.60.y.z code
Traceback (most recent call last):
ImportError: No module named 'typing'

heggink wrote: ↑Monday 29 October 2018 19:57 Sounds like a familiar problem using python on pi3. At some point I had multiple subfolders (python3, python 3.4, 3.5 and 3.6) with libraries spread over most of then. Domoticz only had a few in it's path do no dice. 3 options: 1) fix and revert to one release but no idea how, 2) add path using PYTHONPATH in domoticz startup script or 3) append the path in the python file itself but then everyone would need to do that for themselves...

$ python3 --version

python3 -m pip install pytradfri

moroen wrote: ↑Monday 29 October 2018 20:44

heggink wrote: ↑Monday 29 October 2018 19:57 Sounds like a familiar problem using python on pi3. At some point I had multiple subfolders (python3, python 3.4, 3.5 and 3.6) with libraries spread over most of then. Domoticz only had a few in it's path do no dice. 3 options: 1) fix and revert to one release but no idea how, 2) add path using PYTHONPATH in domoticz startup script or 3) append the path in the python file itself but then everyone would need to do that for themselves...

The configure.py and tradfri.tac files both use the default python3 interpreter. The version of python used by domoticz (as long as it's 3.5 or higher) really don't matter, it's only tradfri.tac (and configure.py) that needs pytradfri. To make sure that pip installs the library for the default interpreter (which usually, but not always, is the one found first in the path):

First make sure that the default python3 is version 3.5 or higher:

Code: Select all

$ python3 --version

Then force pip to install libraries for the default interpreter:

Code: Select all

python3 -m pip install pytradfri

Regards,
M

jakkes72 wrote: ↑Monday 29 October 2018 21:20 Quick answers! great!

Now i get this:
pi@Domoticz:~ $ python3 --version
Python 3.5.2
pi@Domoticz:~ $ python3 -m pip install pytradfri
/usr/local/bin/python3: No module named pip
pi@Domoticz:~ $

pi@Domoticz:~ $ sudo apt-get install python3-pip
Reading package lists... Done
Building dependency tree
Reading state information... Done
python3-pip is already the newest version (9.0.1-2+rpt2).
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
pi@Domoticz:~ $ pip3 --version
pip 18.1 from /usr/local/lib/python3.5/dist-packages/pip (python 3.5)

$ python3
Python 3.7.0 (default, Oct  2 2018, 09:18:58)
[Clang 10.0.0 (clang-1000.11.45.2)] on darwin
Type "help", "copyright", "credits" or "license" for more information.
>>> import pytradfri

jakkes72 wrote: ↑Tuesday 30 October 2018 7:58 Correct:
pi@Domoticz:~ $ python3
Python 3.5.2 (default, Oct 29 2018, 18:04:21)
[GCC 6.3.0 20170516] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import pytradfri
>>>

But running the same command in the domoticz/plugins/IKEA folder fails:


pi@Domoticz:~/domoticz/plugins/IKEA-Tradfri $ python3
Python 3.5.2 (default, Oct 29 2018, 18:04:21)
[GCC 6.3.0 20170516] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import pytradfri
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: No module named 'pytradfri'
>>>

Some path error...?

jakkes72 wrote: ↑Wednesday 31 October 2018 20:50 I did not have a folder name pytradfri in /home/pi/domoticz/plugins. I copied a folder with the files from pytradfri in that directory, but no luck..
I have folders with that name in:
pi@Domoticz:/ $ sudo find -name pytradfri
./usr/local/lib/python3.5/dist-packages/pytradfri
./usr/lib/python3.5/pytradfri
./home/pi/pytradfri/pytradfri
./home/pi/domoticz/plugins/pytrafri/pytradfri (I copied the contents of /home/pi/pytradfri/pytradfri to this directory)

$ pip uninstall pytradfri

$ sudo pip uninstall pytradfri

moroen wrote: ↑Thursday 01 November 2018 13:43 Then remove ALL directories containing pytradfri (i.e find -name pytradfri), and then installing pytradfri using sudo. Just to make sure, find -name pytradfri again, and make sure that it's only found in ONE location...

mak@zwave:~$ which python3
/usr/bin/python3
mak@zwave:~$ cd /opt/domoticz/plugins/IKEA-Tradfri
mak@zwave:/opt/domoticz/plugins/IKEA-Tradfri$ which python3
/usr/bin/python3