Page 19 of 36

Re: machinon theme

Posted: Saturday 06 October 2018 13:57
by Ronker
vamp wrote: Saturday 06 October 2018 13:26 Hi there,

I installed the latest beta but i can not found the new icons...


Image

And the left top Domoticz icon is a bit ugly... :) your screenshots the theme is look mutch better! How to do the same result?

OK the browser flush cache is helped :)

But found a another bug:

Image

the "last seen" line is missing.

Ehh i found it in theme settings... :D No more problem...

I have cleared the cache but still get the domoticz icon instead. Had to replace the image folder

Re: machinon theme

Posted: Monday 08 October 2018 13:13
by EdddieN
updated to zeplin a darker blue bar plus also added a notification icon. The icon only appears when something (yet to be decided) needs to be decided by the system, like an unplanned reboot, etc..
Dashboard_Dark.jpg
Dashboard_Dark.jpg (226.92 KiB) Viewed 2612 times

Dashboard_light.jpg
Dashboard_light.jpg (244.48 KiB) Viewed 2612 times

Re: machinon theme

Posted: Tuesday 09 October 2018 19:53
by EdddieN
Here is a thought, I just saw this post: http://www.domoticz.com/forum/viewtopic ... 68#p193764 which notifes via dzVents about a reboot or similar. Would be nice if these could be tied up on a 'Domoticz notification center' where things like reboots, warning about file systems (or even temperature), basically anything that is related to the operation of Domoticz and the RPI (or whatever hardware).

I have something similar in my NAS and I found it quite useful.

Re: machinon theme

Posted: Tuesday 09 October 2018 19:57
by EdwinK
Looking a bit strange, but with a refresh it's fixed.

Image

Re: machinon theme

Posted: Tuesday 09 October 2018 20:04
by EdddieN
EdwinK wrote:Looking a bit strange, but with a refresh it's fixed.

Image
That sounds like cache and app cache. Are you still seeing the screen like that?

Re: machinon theme

Posted: Tuesday 09 October 2018 20:18
by EdwinK
Only when I return to it after some time, refreshing fixes it. I;m going to clear the appcache when I'm ready for today

Re: machinon theme

Posted: Friday 12 October 2018 17:10
by remb0
when does the beta pushed to the master?
I see some nice commits ;)

Re: machinon theme

Posted: Friday 12 October 2018 17:32
by EdddieN
I use beta and it is pretty stable (for now), however there're a couple of issues with some browsers regarding tiles flex, @landaisbenj working hard to recode that part.

@landaisbenj and @DewGew had forked beta into further two branches (alphas?). I hope we could reach a stable milestone release soon as there're many new features planned, but best to close property stage 1.

I also like to say that without @landaisbenj and @DewGew involvement on this theme, this would not be possible - BIG thank you!

To check beta:
cd domoticz/www/styles
git clone https://github.com/EdddieN/machinon-domoticz_theme.git machinon-beta
cd machinon-beta
git checkout beta

Re: machinon theme

Posted: Friday 12 October 2018 17:35
by heggink
I use the beta and an very happy with it. Wish I had the time to contribute...

Re: machinon theme

Posted: Friday 12 October 2018 20:30
by landaisbenj
heggink wrote: Friday 12 October 2018 17:35 I use the beta and an very happy with it. Wish I had the time to contribute...
Wish i had More Time to contribute too :(

Re: machinon theme

Posted: Friday 12 October 2018 21:07
by EastXIII
Very, very nice theme! Thank you for that!

Because i'm busy building my custom Dashticz V2 dash I found that I'm searching for the IDX numbers quite often. They can be found in "Devices" obviously, but the Aurora theme has the great advantage, at least for me, that the IDX is visible in the block itself.
Not within the favorits section of Domoticz, but in the specific tabs it is.

Is this something that could be implemented in this beauty? Off course only when I'm not the only one seeing this advantage.

Re: machinon theme

Posted: Friday 12 October 2018 21:10
by landaisbenj
EastXIII wrote: Friday 12 October 2018 21:07 Very, very nice theme! Thank you for that!

Because i'm busy building my custom Dashticz V2 dash I found that I'm searching for the IDX numbers quite often. They can be found in "Devices" obviously, but the Aurora theme has the great advantage, at least for me, that the IDX is visible in the block itself.
Not within the favorits section of Domoticz, but in the specific tabs it is.

Is this something that could be implemented in this beauty? Off course only when I'm not the only one seeing this advantage.
Yes i had think about this.. We must to open an issue to add this on our todo.

Re: machinon theme

Posted: Saturday 13 October 2018 7:44
by poudenes
EastXIII wrote: Friday 12 October 2018 21:07 Very, very nice theme! Thank you for that!

Because i'm busy building my custom Dashticz V2 dash I found that I'm searching for the IDX numbers quite often. They can be found in "Devices" obviously, but the Aurora theme has the great advantage, at least for me, that the IDX is visible in the block itself.
Not within the favorits section of Domoticz, but in the specific tabs it is.

Is this something that could be implemented in this beauty? Off course only when I'm not the only one seeing this advantage.
That is a good idea. I'll like it!

Re: machinon theme

Posted: Saturday 13 October 2018 9:17
by EdwinK
EdwinK wrote: Tuesday 09 October 2018 20:18 Only when I return to it after some time, refreshing fixes it. I;m going to clear the appcache when I'm ready for today
And nw, suddenly it works like it should.

Re: machinon theme

Posted: Saturday 13 October 2018 9:17
by heggink
It's a shame that so much in domoticz is dependent on the idx. One reason I really like dzvents. Replacing a device is a no maintenance event. Idx' really should be an internal thing.

Re: machinon theme

Posted: Saturday 13 October 2018 19:24
by poudenes
heggink wrote: Saturday 13 October 2018 9:17 It's a shame that so much in domoticz is dependent on the idx. One reason I really like dzvents. Replacing a device is a no maintenance event. Idx' really should be an internal thing.
I have a global_data and give any IDX a name. When a device change and also IDX i only have to change it on the global_data and all my dzvents script are working normal without changing anything

Re: machinon theme

Posted: Sunday 14 October 2018 10:01
by heggink
I know but that doesn't work for things like dashticz and you still need to maintain global data. My point was more generic in a sense that the idx should have been an internal thing. Even blockly works with idx so if you swap a device, you need to update it...

Re: machinon theme

Posted: Monday 15 October 2018 11:42
by EdddieN
Anyone that could help us make this happen?
https://github.com/EdddieN/machinon-dom ... issues/138

Re: machinon theme

Posted: Thursday 18 October 2018 13:50
by vamp
I use the latest beta, i think the font size is too big (or box sizes is too small)


Image
Image

Re: machinon theme

Posted: Thursday 18 October 2018 22:19
by EdddieN
Layout still been worked on, a lot of changes in the last few days. Hopefully we'll get to the visuals soon