Domoticz Community Forum - Support & Discussion

Code: Select all

  "pages": [
    {
      "name": "Page 1",
      "number": 1,
      "idx": [
        122,
        75,
        16,
        36,
        28,
        -2,
        63,
        90,
        145
      ]
    },
    {
      "name": "Page 2",
      "number": 2,
      "idx": [
        12,
        75,
        16,
        36,
        28,
        -1,
        63,
        0,
        0
      ]
    }
  ]

Code: Select all

	-DUSER_SETUP_LOADED=1 # To enable config throught platformio for TFT_eSPI
	#-DFORCE_CONFIG # Enable or disable the forced network configuration.
	-DFORCECALIBRATE=false # Reset the calibration at every restart, used to reset it after a config change.
	#-DOLD_DOMOTICZ # If you are using older Domoticz version < 2023.2
	-DPAGES=2 # Count of widget pages, including HomePage, need to be at least 1
	-DFASTCLIC # Enable 1 clic action for some widget
	#-DNO_INFO_PAGE # Disable the Info panel
	#-DNO_GROUP_PAGE # Disable the Group/scene panel
	-DFONT_TO_USE=1 # 1=Standard 2=Custom 3=French
	-DHIDE_PASSWORD # Hide password input (else show it)
	#-DAUTO_BRIGHTNESS
	-DDIM_OFF_ICONS # Change Off/Closed devices icons to grey
	-DLIGHTWS # Only possible for version > 16088, decrease WS requests.
	-DPUSHOTA # To enable PUSH OTA (Don't enable both OTA)
	#-DPULLOTA # To enable PULL OTA (Don't enable both OTA)
	#-DCORE_DEBUG_LEVEL=5 # To enable debug on serial for librairies and core
	#-DLV_USE_SNAPSHOT=1 # Enable to take screen snapshots (will fail on non PSRAM devices)
   	#-DDEBUG_LVGL # Used to internaly debug LGVL