Domoticz

Thorgal789 wrote: ↑Friday 18 October 2019 19:25 Lol, np the tool is easy to use, you need same parameters than in the plugin.

Go in the plugin directory

Code: Select all

cd /home/pi/domoticz/plugins/Domoticz-deCONZ

You can have a different folder.

Thorgal789 wrote: ↑Saturday 19 October 2019 19:11 To create a key

Code: Select all

python3 API_KEY.py <ip>:<port> create

With same ip and port you have set in the plugin.

00luke wrote: ↑Sunday 20 October 2019 9:41 Thanks Thorgal789, I'll try updating my python version and let you know if it helps to solve things. Can't see it would make much difference though? Seems Domoticz just not talking to python.. couldn't be something as simple as an access / rights problem could it??

Harald777 wrote: ↑Saturday 19 October 2019 19:21
Did that, the reply was:

pi@RaspberryPI-Domoticz:~/domoticz/plugins/Domoticz-deCONZ $ python3 API_KEY.py 127.0.0.1:80 create

http://127.0.0.1:80/

Harald777 wrote: ↑Saturday 19 October 2019 19:21
Did that, the reply was:

pi@RaspberryPI-Domoticz:~/domoticz/plugins/Domoticz-deCONZ $ python3 API_KEY.py 127.0.0.1:80 create

http://127.0.0.1:80/

Thorgal789 wrote: ↑Sunday 20 October 2019 19:29 It's not an installation problem. Are you sure deconz is running ?
What is the url when you go on phoscon ?

If you don't have url, are you using headless or GUI version ? Have you the IP of the machine where is deconz ? Are you using docker or Virtual machine ?

Thorgal789 wrote: ↑Friday 26 July 2019 22:38 Ha nice ^^, I can't try it on my side.
I don't see how to implement it on the plugin, but It's easy to make a switch to do that.

- Make a virtual sensor type switch on/off called 'colorloop'
- Use this script

Code: Select all

-- Color loop test

commandArray = {}

function SendJson(url,json)
	local curl = "/usr/bin/curl"
	local cmd = curl .. ' -X PUT -d '..json..' '..url
	local vac = os.execute(cmd)
	if vac ~= true then
		print('Send JSON Error')
	end
end

--color loop switch
if devicechanged['colorloop'] then
    if devicechanged['colorloop'] == 'On' then
        print('Start colorloop')
        SendJson('http://192.168.178.93/api/D279EE0F45/lights/50/state','\'{"effect":"colorloop","on":true}\'')
    else
        print('Stop colorloop')
        SendJson('http://192.168.178.93/api/D279EE0F45/lights/50/state','\'{"effect":"none","on":true}\'')
    end
end

return commandArray

I can't test it but I think I m not so far from the reality. For information you can add in json "colorloopspeed":255

"Specifies the speed of a colorloop. 1 = very fast, 255 = very slow (default: 15). This parameter only has an effect when it is called together with effect colorloop."

Thorgal789 wrote: ↑Monday 21 October 2019 16:39 Nice, so you have choose the desktop version ?

After the installation deCONZ can be started via the application menu.
Menu > Programming > deCONZ

IDK wich one VNC appliation you are using, but don't install one, use the Raspian built in one.

After that on deconz on top right, you have a button "phoscon app", just clic on it and it will open your browser with good ip and good port (invisible port = port 80)

If it's that, you need to set your install to run deconz at startup, I can explain my method if you don't have one.

Harald777 wrote: ↑Monday 21 October 2019 18:02 So I cannot access Domoticz via 443 port anymore and sensor creation fails.
Don't now is 443 port issue is normal now and perhaps I should allow new sensor discovery to "always"now.

Greetings,

Harald

2019-10-21 17:43:47.851 Error: (deConz) Device creation failed, Domoticz settings prevent accepting new devices.

2019-10-21 17:43:10.204 Error: WebServer(SSL) startup failed on address 0.0.0.0 with port: 443: bind: Address already in use

salopette wrote: ↑Monday 21 October 2019 17:40
Hi, is it possible to make a selector for Colorloop?

If you enter a url for each select?

Thorgal789 wrote:

Harald777 wrote: ↑Monday 21 October 2019 18:02 So I cannot access Domoticz via 443 port anymore and sensor creation fails.
Don't now is 443 port issue is normal now and perhaps I should allow new sensor discovery to "always"now.

Greetings,

Harald

Hello again ^^,

Code: Select all

2019-10-21 17:43:47.851 Error: (deConz) Device creation failed, Domoticz settings prevent accepting new devices.

Have you enabled "accept new device" in domoticz setup ?

Thorgal789 wrote: ↑Monday 21 October 2019 21:33

salopette wrote: ↑Monday 21 October 2019 17:40
Hi, is it possible to make a selector for Colorloop?

If you enter a url for each select?

An url for each select ? You mean for temporistation ? because you can't choose color. And url are post command, not sure we can use them as it in domoticz