Domoticz

joyride1176 wrote: ↑Wednesday 01 January 2020 17:44 Hi All!

I'm using SVT to warm up seven rooms using two instances of domoticz and seven HW components, one for every room
I've read all pages in this thread but I din't found and to below behavior

In practice SVT swtich on the heat for 10 sec which is not in line with the configuration:20,2,2,1,60 ( I expect 2 minutes of minimum heat per cycle)
Below the logs, anyone has a suggestion on what's going on?
in this way valves may go out of sync....

EmKaRo wrote: ↑Sunday 05 January 2020 20:29 All the best in 2020.
Please tell me how often thermostat temperature is refreshed?
Is it one per cycle?

Logread wrote: ↑Sunday 26 January 2020 11:49 @Remicade,

My suggestion would be to remove 17 from the plugins switches lists and run a script that sets 17 « On » if 13 or 15 are on, and switches 17 « Off » if 13 and 15 are « Off ».

Hope this helps

peerkersezuuker wrote: ↑Thursday 06 February 2020 19:11 Hello,
@logread, I am trying to get the SVT to work within domoticz.
But I bumped in to a problem with the update of the user variabele from within the plugin.
When it is getting updated from within the plugin an api cal is send out

Code: Select all

Virtual Thermostat) Calling domoticz API: http://192.168.0.31:8880/json.htm?type=command&param=updateuservariable&vname=Virtual%20Thermostat-InternalVariables&vtype=2&vvalue=%7B%27ConstC%27%3A%200.9%2C%20%27ConstT%27%3A%201.0%2C%20%27nbCC%27%3A%203%2C%20%27nbCT%27%3A%205%2C%20%27LastPwr%27%3A%2017.6%2C%20%27LastInT%27%3A%2019.6%2C%20%27LastOutT%27%3A%203.7%2C%20%27LastSetPoint%27%3A%2020.5%2C%20%27ALStatus%27%3A%201%7D

And this is causing my domoticz to crash.

See https://www.domoticz.com/forum/viewtopi ... =6&t=31238

Is this something you ever came across ?

Regards
Peer

Remicade wrote: ↑Tuesday 28 January 2020 19:33

Logread wrote: ↑Sunday 26 January 2020 11:49 @Remicade,

My suggestion would be to remove 17 from the plugins switches lists and run a script that sets 17 « On » if 13 or 15 are on, and switches 17 « Off » if 13 and 15 are « Off ».

Hope this helps

Thanks for your quick reaction Logread,
What do you suggest? DzVents?
And how to wriye such a function?
using devicechanged funtion?
Any help is welcome!

Thanks Paul

Logread wrote: ↑Sunday 26 January 2020 11:49 @Remicade,

My suggestion would be to remove 17 from the plugins switches lists and run a script that sets 17 « On » if 13 or 15 are on, and switches 17 « Off » if 13 and 15 are « Off ».

Hope this helps

Remicade wrote:Hi,

return {
active = true,
on = {
'Bart Switch'
},
execute = function(domoticz, switch)
if (switch.state == 'On') then
domoticz.devices['CV'].switchOn()
end
end
}

Tried the code above....I do not get it? LUA...dZvents??? Not clear for me..


All I want is : If Lars is on, then CV is on. If Bart is on, the CV is on.

Thanks
step by step help is needed I think...
Cheers Paul

return {
	active = true,
	on = {
		'Bart Switch',
		'Piet Switch',
		'Jan Switch'
	},
	execute = function(domoticz, switch)
		local Bart = domoticz.devices('Bart Switch')
		local PIet = domoticz.devices('Piet Switch')
		local Jan = domoticz.devices('Jan Switch')
		if (switch.state == 'On') then
			domoticz.devices['CV'].switchOn().checkfirst() --only switch when necessary, avoid multiple entries in the log
		elseif (Bart.state =='Off' and Piet.state =='Off' and Jan.state =='Off') then --no heat required anymore by any of the SVT switches
			domoticz.devices['CV'].switchOff().checkfirst() --only switch when necessary, avoid multiple entries in the log
		end
	end
}

jake wrote: ↑Friday 13 March 2020 21:31

Remicade wrote:Hi,

return {
active = true,
on = {
'Bart Switch'
},
execute = function(domoticz, switch)
if (switch.state == 'On') then
domoticz.devices['CV'].switchOn()
end
end
}

Tried the code above....I do not get it? LUA...dZvents??? Not clear for me..


All I want is : If Lars is on, then CV is on. If Bart is on, the CV is on.

Thanks
step by step help is needed I think...
Cheers Paul

Yes, this is a dzvents script that you need to put in the domoticz\scripts\dzVents\scripts folder. the example here above only one SVT heater is shown, but this can be multiplied by other svt switches:

Code: Select all

return {
	active = true,
	on = {
		'Bart Switch',
		'Piet Switch',
		'Jan Switch'
	},
	execute = function(domoticz, switch)
		local Bart = domoticz.devices('Bart Switch')
		local PIet = domoticz.devices('Piet Switch')
		local Jan = domoticz.devices('Jan Switch')
		if (switch.state == 'On') then
			domoticz.devices['CV'].switchOn().checkfirst() --only switch when necessary, avoid multiple entries in the log
		elseif (Bart.state =='Off' and Piet.state =='Off' and Jan.state =='Off') then --no heat required anymore by any of the SVT switches
			domoticz.devices['CV'].switchOff().checkfirst() --only switch when necessary, avoid multiple entries in the log
		end
	end
}