Domoticz

This list is really useful for checking if a device that you have found online is compatible with RFLink.

But it would be useful if it would also work the other way around: that once I have chosen to go with RFLink, I can use this list as a startingpoint to find compatible devices for my needs. For example: I would like to know which temperature sensors I can buy that are compatible with RFLink. The current list doesn't help me with this task.

A quick way of fixing this would be to turn the list into a table, and add data about the devices: what they do (tags?), what they cost, and links to buy these maybe (which may be a source of income for this project?).

Home Assistant does this the best probably: https://home-assistant.io/components

Prologue 36-4744 (Clas Ohlsson) works out of the box.

Thanks for reporting..

I am planning to buy an RF link, and attach it to my Udoo Quad, with domoticz already installed.
Is this possible?

Sure..

tontze wrote:Prologue 36-4744 (Clas Ohlsson) works out of the box.

Stuntteam wrote:Thanks for reporting..

Except now im seeing that it allways reports battery low, even tho there is new batteries. Dont know if this false report from module itself, how can i test it ? Got 3 of these, and all says low battery ...

Make a short debug log (look here: http://www.nemcon.nl/blog2/development)
and mail me that ([email protected])
Then I will take a look and correct it if needed.

Stuntteam wrote:Make a short debug log (look here: http://www.nemcon.nl/blog2/development)
and mail me that ([email protected])
Then I will take a look and correct it if needed.

Email sent

I'm looking to buy some cheap RF switches that you plug into a wall socket.

These "FW1S" are the cheapest I could find on AliExpress:
https://www.aliexpress.com/item/FW1S-EU ... 52503.html

- Are they supported? I'm guessing not.

- It would be so cool if RFLink could record and re-broadcast any arbitrary RF signal. Then I wouldn't have to ask, then Domoticz could just copy the remote's codes.

I have them. They are not working with RFlink. I've send RFlink and RM broadlink (they are working with RM) codes to Frank Zirrone 16.02.2017, but no reply.

____
may

For 17 euros the set is a piece of junk.. Go to the Action store and get a set for 10 euros.
Anyway, the FW1S set will probably supported by R46 (available soon)

Working OutOfBox Firmware R46 - BAHUON BHC9938F-X (set of 3 433Mhz 230VAC Socket plugs with Remote identified by remote number - 1415 for example - and 1/2/3 plug number)

Not working - firmware R46 - 230VAC socket "RisingSun (Conrad) RSL3660-F Rx" 230V-16A 3500W.
Identified by HouseCode (I-II-III-IV)/UnitCode (1-2-3-4)
The ON command send through Domoticz does nothing (using ARC / COCO GDR2 / RisingSun).
I have only sockets (no remote to learn code)

Use RFlink loader, make a serial connection
Put the socket in learning mode and enter the following command to pair it:
10;CONRAD;960500;5;PAIR;

In Domoticz, got to [settings,hardware] use the [create rflink device] button and enter the following in the popup:
20;0E;Conrad;ID=960500;SWITCH=05;CMD=ON;

Hi Stuntteam,
I've captured this from a working Solla remote, and created a device, but it doesn't work, although it transmits correctly.
20;66;TriState;ID=099590;SWITCH=1;CMD=ON;

Try the rffind option.. or send a debug log to [email protected]

RFfind?

tontze wrote:Prologue 36-4744 (Clas Ohlsson) works out of the box.

I have one of those but it does not work so well for me. I have home assistant on my RPi2 with a tellstick duo.

Is there any connection procedure I'm supposed to do?

Heldestad wrote:

tontze wrote:Prologue 36-4744 (Clas Ohlsson) works out of the box.

I have one of those but it does not work so well for me. I have home assistant on my RPi2 with a tellstick duo.

Is there any connection procedure I'm supposed to do?

Im using rflink, dont know anything about tellstick