Domoticz

Doudy wrote: ↑Monday 06 November 2017 17:21 It's a way of seeing things.
I would prefer live variations.

Doudy wrote: ↑Saturday 11 November 2017 11:57 Hello,
I'm still here.
I tried to start interceptWH2600.py via the interceptWH2600.sh script.
The script works but interceptWH2600.py does not start.

Code: Select all

pi@RASPBERRYPI-182:~/interceptWH2600 $ sudo /etc/init.d/interceptWH2600.sh start
[ ok ] Starting interceptWH2600.sh (via systemctl): interceptWH2600.service.
pi@RASPBERRYPI-182:~/interceptWH2600 $ /etc/init.d/interceptWH2600.sh status
● interceptWH2600.service - LSB: Intercept weather data from your WH2600 Weather Station
   Loaded: loaded (/etc/init.d/interceptWH2600.sh)
   Active: active (exited) since sam 2017-11-11 11:37:47 CET; 4s ago
  Process: 11875 ExecStop=/etc/init.d/interceptWH2600.sh stop (code=exited, status=0/SUCCESS)
  Process: 11961 ExecStart=/etc/init.d/interceptWH2600.sh start (code=exited, status=0/SUCCESS)

I followed the wiki procedure
sudo cp /home/pi/interceptWH2600/interceptWH2600.sh /etc/init.d
sudo chmod 0755 /etc/init.d/interceptWH2600.sh
sudo systemctl daemon-reload
sudo /etc/init.d/interceptWH2600.sh start

start-stop-daemon line :

Code: Select all

start-stop-daemon --start --background --pidfile $PIDFILE --make-pidfile --name $daemon_NAME --quiet --chuid $DAEMONUSER --startas $DAEMON 

The script .sh

Code: Select all

#!/bin/sh

### BEGIN INIT INFO
# Provides:          interceptWH2600
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Intercept weather data from your WH2600 Weather Station
# Description:       Intercept weather data from your WH2600 Weather Station
### END INIT INFO

# Change the next 3 lines to suit where you install your script and what you want to call it
DIR=/home/pi/interceptWH2600
DAEMON=$DIR/interceptWH2600.py
DAEMON_NAME=interceptWH2600
DAEMON_OPTS=""
LOG=/home/pi/interceptWH2600/interceptWH2600.log
PATH=$PATH:/sbin:/bin:/usr/sbin:/usr/bin

. /lib/lsb/init-functions

# This next line determines what user the script runs as.
# Root generally not recommended but necessary if you are using the Raspberry Pi GPIO from Python.
DAEMON_USER=pi

# The process ID of the script when it runs is stored here:
PIDFILE=/var/run/$DAEMON_NAME.pid

do_start () {
    log_daemon_msg "Starting system $DAEMON_NAME daemon"
	start-stop-daemon --start --background --pidfile $PIDFILE --make-pidfile --name $daemon_NAME --quiet --chuid $DAEMONUSER --startas $DAEMON -- $DAEMON_OPTS

$DAEMON_OPTS
    log_end_msg $?
}

do_stop () {
    log_daemon_msg "Stopping system $DAEMON_NAME daemon"
    start-stop-daemon --stop --pidfile $PIDFILE --retry 10
    log_end_msg $?
}

case "$1" in
    start|stop)
        #do_${1}
        ;;
    stop)
		do_stop
        #do_${1}
        ;;
    restart|reload|force-reload)
        do_stop
        do_start
        ;;
    status)
        status_of_proc "$DAEMON_NAME" "$DAEMON" && exit 0 || exit $?
        ;;

    *)
        echo "Usage: /etc/init.d/$DAEMON_NAME {start|stop|restart|status}"
        exit 1
        ;;

esac

exit 0

An idea ?

/home/pi/interceptWH2600/interceptWH2600.py -v -d

-bash: /home/pi/interceptWH2600/interceptWH2600.py : /usr/bin/^M : mauvais interpréteur: Aucun fichier ou dossier de ce type

wrong interpreter: No file or file of this type

BakSeeDaa wrote: ↑Saturday 11 November 2017 12:18 That can easily be done by modifying the script to suit your needs.

Doudy wrote: ↑Saturday 11 November 2017 13:27 The messages is :

Code: Select all

-bash: /home/pi/interceptWH2600/interceptWH2600.py : /usr/bin/^M : mauvais interpréteur: Aucun fichier ou dossier de ce type

in english :

wrong interpreter: No file or file of this type

/usr/bin/python -V

ls -la /home/pi/interceptWH2600/interceptWH2600.py

/usr/bin/python /home/pi/interceptWH2600/interceptWH2600.py -v -d

Doudy wrote: ↑Saturday 11 November 2017 15:52

BakSeeDaa wrote: ↑Saturday 11 November 2017 12:18 That can easily be done by modifying the script to suit your needs.

Ok but how?
I am very very beginner ...

BakSeeDaa wrote: ↑Sunday 12 November 2017 10:12 Do you have python installed?

pi@RASPBERRYPI-182:~/interceptWH2600 $ /usr/bin/python -V
Python 2.7.9

Check version with

Code: Select all

/usr/bin/python -V

If you don't have python installed, you must install it.

Installed

Check that the file /home/pi/interceptWH2600/interceptWH2600.py exists.

Code: Select all

ls -la /home/pi/interceptWH2600/interceptWH2600.py

pi@RASPBERRYPI-182:~/interceptWH2600 $ ls -la /home/pi/interceptWH2600/interceptWH2600.py
-rwxrwxrwx 1 pi pi 22858 nov 12 10:59 /home/pi/interceptWH2600/interceptWH2600.py

When python is installed and the /home/pi/interceptWH2600/interceptWH2600.py file exists, please try this command:

Code: Select all

/usr/bin/python /home/pi/interceptWH2600/interceptWH2600.py -v -d

pi@RASPBERRYPI-182:~/interceptWH2600 $ /usr/bin/python /home/pi/interceptWH2600/interceptWH2600.py -v -d
Debug is on
WH2600 Interceptor 1.0.3 listening for PWS on port 8084. Running on TTY console...
Received data for station ID : IATH46
windchillf 41.4
rainin 0.0
dailyrainin 0.32
monthlyrainin 1.12
solarradiation 82.77
realtime 1
windspeedmph 4.7
baromin 29.48
rtfreq 12
lowbatt 0
windgustmph 4.92
tempf 44.1
indoorhumidity 49
winddir 254
dewptf 40.5
PASSWORD te5f9tza
ID IATH46
dateutc 2017-11-12 11:25:19
softwaretype WH2600 Interceptor V. 1.0.3
yearlyrainin 5.46
UV 1
humidity 87
action updateraw
weeklyrainin 0.77
indoortempf 70.2

Latest wind speed reading: 254
'windDirSmoothenizer' is active. Resultant of the last 4 wind direction readings (Reported to WU) : 254
array [254, 254, 254, 254]

Checking if Domoticz devices needs to be updated...
Updating the Domoticz Indoor Temp + Humidity device to 21.2 ; 49
Updating the Domoticz Outdoor Temp + Humidity device to 6.7 ; 87
Updating the Domoticz Barometer device to 998.0
Updating the Domoticz UV device to 1
Updating the Domoticz Solar Radiation device to 82
{'windchillf': 41.4, 'rainin': 0.0, 'winddir_avg10m': 254, 'windspdmph_avg2m': 4.7, 'windgustmph_2m': 4.92, 'dailyrainin': 0.32, 'monthlyrainin': 1.12, 'solarradiation': 82.77, 'realtime': 1, 'windspeedmph': 4.7, 'baromin': 29.48, 'rtfreq': 12, 'winddir_avg2m': 254, 'lowbatt': 0, 'windgustmph': 4.92, 'tempf': 44.1, 'indoorhumidity': 49, 'windspdmph_avg10m': 4.7, 'winddir': 254, 'dewptf': 40.5, 'PASSWORD': 'xxxxxx', 'ID': 'IATH46', 'dateutc': '2017-11-12 11:25:19', 'softwaretype': 'WH2600 Interceptor V. 1.0.3', 'windgustmph_10m': 4.92, 'yearlyrainin': 5.46, 'UV': 1, 'humidity': 87, 'action': 'updateraw', 'weeklyrainin': 0.77, 'indoortempf': 70.2}
success

https://rtupdate.wunderground.com/weath ... tempf=70.2
Received data for station ID : IATH46
windchillf 41.4
rainin 0.0
dailyrainin 0.32
monthlyrainin 1.12
solarradiation 82.77
realtime 1
windspeedmph 4.7
baromin 29.49
rtfreq 12
lowbatt 0
windgustmph 4.92
tempf 44.1
indoorhumidity 49
winddir 254
dewptf 40.5
PASSWORD te5f9tza
ID IATH46
dateutc 2017-11-12 11:25:28
softwaretype WH2600 Interceptor V. 1.0.3
yearlyrainin 5.46
UV 1
humidity 87
action updateraw
weeklyrainin 0.77
indoortempf 70.2
Past 2 minutes resultant wind direction: 254
Past 10 minutes resultant wind direction: 254
Past 2 minutes average wind speed: 2.1
Past 10 minutes average wind speed: 2.1
Past 2 minutes maximum wind gust speed: 2.2
Past 10 minutes maximum wind gust speed: 2.2
[254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254, 254]
[2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1, 2.1]
[2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2, 2.2]

Latest wind speed reading: 254
'windDirSmoothenizer' is active. Resultant of the last 4 wind direction readings (Reported to WU) : 254
array [254, 254, 254, 254]

success

https://rtupdate.wunderground.com/weath ... tempf=70.2
^C^C received, shutting down the web server

BakSeeDaa wrote: ↑Sunday 12 November 2017 10:24 Anyway if you'd like to change it, edit the configuration file and set "windDirSmoothenizer" to false.

Latest wind speed reading: 254

Latest wind direction reading: 254

Doudy wrote: ↑Sunday 12 November 2017 11:43 hello,
a small note

there is

Latest wind speed reading: 254

it is necessary

Latest wind direction reading: 254

BakSeeDaa wrote: ↑Sunday 12 November 2017 10:24 Anyway if you'd like to change it, edit the configuration file and set "windDirSmoothenizer" to false.

Doudy wrote: ↑Wednesday 15 November 2017 8:50

BakSeeDaa wrote: ↑Sunday 12 November 2017 10:24 Anyway if you'd like to change it, edit the configuration file and set "windDirSmoothenizer" to false.

I do not see any change when displaying.

I would like to arrive at the same thing as on the WU website.

	# Updating the 'Wind' device. No need to check the current value, it's likely to be different anyway
	elif domoDevice['categoryName'] == 'Wind' and domoDevice['domoticzSensorType'] == 86:
		# First build the data string
		dataString = str(jsonQs['winddir_avg10m'])
		dataString += ';' + str(degToCompass(jsonQs['winddir_avg10m']))
		dataString += ';' + str(round(ms(jsonQs['windspdmph_avg10m']) * 10 , 0))
		dataString += ';' + str(round(ms(jsonQs['windgustmph_10m']) * 10 , 0))
		dataString += ';' + str(round(temp_c(jsonQs['tempf']), 1))
		dataString += ';' + str(round(wind_chill(temp_c(jsonQs['tempf']), jsonQs['windspdmph_avg10m']), 1))
		if isDebug: print 'Wind data string: ', dataString # E.g. '4;N;30.0;44.0;-6.6;-14.3'
		if isVerbose: print 'Updating the Domoticz Wind device to', dataString
		payload = dict([('type', 'command'), ('param', 'udevice'), ('idx', domoDevice['domoticzIdx']), \
				('nvalue', 0), ('svalue', dataString)])
		r = domoticzAPI(payload)

BakSeeDaa wrote: ↑Wednesday 15 November 2017 9:17 You never answered me before when I asked you, I'm so curious to know how instantaneous wind data can be used for home automation. I mean, one second the wind comes from south with a speed of 3 m/s. Maybe 10 seconds after that the wind comes from west but 0.1 m/s and maybe another 10 seconds followed by wind from north east at the speed of 3 m/s. For me, that's all random data that says nothing really.
Good luck!

BakSeeDaa wrote: ↑Wednesday 15 November 2017 9:17 If you'd like to update your Domoticz device with instantaneous wind data, locate the following code and remove all occurances of the text '_avg10m', so that winddir_avg10m becomes winddir etc. Make sure your substitution only affects the code shown below.

UPDATE_INTERV = 1 # Expected Weather Station report Interval in seconds
UPDATE_DOMO_INTERV = 1 # Weather Station report Interval that Domoticz will by updated by

	# Updating the 'Wind' device. No need to check the current value, it's likely to be different anyway
	elif domoDevice['categoryName'] == 'Wind' and domoDevice['domoticzSensorType'] == 86:
		# First build the data string
		dataString = str(jsonQs['winddir'])
		dataString += ';' + str(degToCompass(jsonQs['winddir']))
		dataString += ';' + str(round(ms(jsonQs['windspeedmph']) * 10 , 0))
		dataString += ';' + str(round(ms(jsonQs['windgustmph']) * 10 , 0))
		dataString += ';' + str(round(temp_c(jsonQs['tempf']), 1))
		dataString += ';' + str(round(wind_chill(temp_c(jsonQs['tempf']), jsonQs['windspeedmph']), 1))
		if isDebug: print 'Wind data string: ', dataString # E.g. '4;N;30.0;44.0;-6.6;-14.3'
		if isVerbose: print 'Updating the Domoticz Wind device to', dataString
		payload = dict([('type', 'command'), ('param', 'udevice'), ('idx', domoDevice['domoticzIdx']), \
				('nvalue', 0), ('svalue', dataString)])
		r = domoticzAPI(payload)

Doudy wrote: ↑Tuesday 21 November 2017 9:03 ...
But, interceptWH2600.py don't working
...

Doudy wrote: ↑Saturday 04 November 2017 9:36 Remark

in wiki there is

Code: Select all

sudo update-rc.d /etc/init.d/interceptWH2600.sh defaults

il is

Code: Select all

sudo update-rc.d interceptWH2600.sh defaults

Doudy wrote: ↑Tuesday 21 November 2017 9:03

ls -la /home/pi/interceptWH2600/interceptWH2600.py

sudo chmod 755 /home/pi/interceptWH2600/interceptWH2600.py

sudo /etc/init.d/interceptWH2600.sh start

pgrep -x "interceptWH2600"

Doudy wrote: ↑Tuesday 21 November 2017 11:43 Here is the result :
...
pgrep ==> Display nothing


Thanks for your help