Domoticz

Code: Select all

#!/bin/bash
#
DOMO_IP="127.0.0.1"                     # Domoticz IP Address
DOMO_PORT="8080"                        # Domoticz Port
TEMP_IDX="824"                          # IDX for Virtual switch temperature

cd /home/domoticz/domoticz/scripts/python/broadlink/

function sensore {
python - <<END
import broadlink
import time
device = broadlink.rm(host=("192.168.0.15",80), mac=bytearray.fromhex("XX YY ZZ KK JJ WW"))
device.auth()
sensor = device.check_temperature()
print sensor
END
}

# Call it and capture the output
SENSORE=$(sensore)
echo Sensore: $SENSORE
temperature=$(echo $SENSORE | cut -d' ' -f8 - | tr -d ,)
echo $temperature
#
curl -s -i -H "Accept: application/json" "http://$DOMO_IP:$DOMO_PORT/json.htm?type=command&param=udevice&idx=$TEMP_IDX&svalue="$temperature""

Code: Select all

#!/bin/bash
#
DOMO_IP="127.0.0.1"                     # Domoticz IP Address
DOMO_PORT="8080"                        # Domoticz Port
AIRQ_IDX="821"                          # IDX for Virtual switch air_quality
LIGHT_IDX="822"                         # IDX for Virtual switch light
NOISE_IDX="823"                         # IDX for Virtual switch noise
TEMP_IDX="819"                          # IDX for Virtual switch temperature
HUM_IDX="820"                           # IDX for Virtual switch humidity

cd /home/domoticz/domoticz/scripts/python/broadlink/

function sensori {
python - <<END
import broadlink
import time
device = broadlink.a1(host=("192.168.0.16",80), mac=bytearray.fromhex("XX YY ZZ KK JJ WW"))
device.auth()
sensors = device.check_sensors()
print sensors
END
}

# Call it and capture the output
SENSORI=$(sensori)
echo Sensori: $SENSORI
#
# Esempio output {'air_quality': 'excellent', 'light': 'dark', 'noise': 'quiet', 'temperature': 23.3, 'humidity': 48.0}
#
air_quality=$(echo $SENSORI | cut -d' ' -f2 - | tr -d ,)
light=$(echo $SENSORI | cut -d' ' -f4 - | tr -d ,)
noise=$(echo $SENSORI | cut -d' ' -f6 - | tr -d ,)
temperature=$(echo $SENSORI | cut -d' ' -f8 - | tr -d ,)
humidity=$(echo $SENSORI | cut -d' ' -f10 - | tr -d })

#/json.htm?type=command&param=udevice&idx=IDX&nvalue=HUM&svalue=HUM_STAT
# IDX =idx de votre capteur. A obtenir depuis l’écrans des dispositifs.
# HUM = Humidité: 45 par exemple pour 45%
# HUM_STAT = Humidity_status
# Humidity_status peut être :
#
# 0=Normal
# 1=Confortable
# 2=Sec
# 3=Humide
# Ce paramètre est obligatoire, si vous ne savez pas quoi mettre, mettez 0

hum_stat=0
#if [ $humidity<25 ]; then hum_stat=2; fi
#if [ $humidity>60 ]; then hum_stat=3; fi
#if [ $humidity>=25 && $humidity<=60 ]; then hum_stat=1; fi

case $humidity in
[0-25])
  hum_stat=2
  ;;
[26-60])
  hum_stat=1
  ;;
[61-100])
  hum_stat=3
  ;;
*)
  hum_stat=0
  ;;
esac

echo $air_quality
echo $light
echo $noise
echo $temperature
echo $humidity
echo $hum_stat

curl -s -i -H "Accept: application/json" "http://$DOMO_IP:$DOMO_PORT/json.htm?type=command&param=udevice&idx=$AIRQ_IDX&svalue="$air_quality""
curl -s -i -H "Accept: application/json" "http://$DOMO_IP:$DOMO_PORT/json.htm?type=command&param=udevice&idx=$LIGHT_IDX&svalue="$light""
curl -s -i -H "Accept: application/json" "http://$DOMO_IP:$DOMO_PORT/json.htm?type=command&param=udevice&idx=$NOISE_IDX&svalue="$noise""
curl -s -i -H "Accept: application/json" "http://$DOMO_IP:$DOMO_PORT/json.htm?type=command&param=udevice&idx=$TEMP_IDX&svalue="$temperature""