Domoticz

LJ80 wrote:

iMiMx wrote:

LJ80 wrote:simple question:

It is very hard to select a normal warm white color with the hex code.
Or the light will be orange, or it will be very industrial white.

Does someone know or want to post their hex code?

It's not currently possible, as far as I'm aware, as Domoticz does not support the colour temperature setting - the only way is using a script direct to the bridge, then call this from Domoticz. Good explanation on the developer pages

http://www.developers.meethue.com/docum ... e-concepts

Okay too bad then, hope Gizmocuz will make this possible in the future.
Or someonelse with the know how.

Thanks for your answer.

Morcegolas wrote: If I put the same thing with the alert command too it will change the color and blink, but it beaver it's strange, instead of turning ON/OFF it fades a little and then bright again to 100%. The code I used was this:

JustME125 wrote:Hi Edgar,

Thanks for the reply. I tried it and it did not work unfortunately. I can imaging it works like this when using RF stuff because you can intercept wireless commands but my domoticz is not aware of any zigbee communication so it can't intercept those commands.

Domoticz has to query the brigde for the available light but doesn't do that apparently.

-------------Solved-------------------
I have reset my bridge completely back to factory settings and started over again, now it works.
Apparantly Domoticz need to have Hue Light ID's to start with 1, not with 6.

mcpoowl wrote:

JustME125 wrote:Hi Edgar,

Thanks for the reply. I tried it and it did not work unfortunately. I can imaging it works like this when using RF stuff because you can intercept wireless commands but my domoticz is not aware of any zigbee communication so it can't intercept those commands.

Domoticz has to query the brigde for the available light but doesn't do that apparently.

-------------Solved-------------------
I have reset my bridge completely back to factory settings and started over again, now it works.
Apparantly Domoticz need to have Hue Light ID's to start with 1, not with 6.

What'd you do to reset your bridge completly?

gizmocuz wrote:Is 'Accept new hardware' enabled in the settings? If not, enable this, then disable/enable the hue hardware in the hardware setup
did you install the 'HueMote' application and confirm that there are groups ?
you should at least get 1 group (group all) regardless if you created any group with the latest beta (#4078+)

{
	"1": {
		"name": "Salle à manger",
		"lights": [
			"2",
			"1"
		],
		"type": "LightGroup",
		"action": {
			"on": true,
			"bri": 254,
			"hue": 47610,
			"sat": 214,
			"effect": "none",
			"xy": [
				0.2014,
				0.1054
			],
			"ct": 153,
			"alert": "none",
			"colormode": "xy"
		}
	},
	"2": {
		"name": "Chambre parents",
		"lights": [
			"3"
		],
		"type": "LightGroup",
		"action": {
			"on": false,
			"bri": 254,
			"alert": "none"
		}
	}
}

wmn79 wrote:Since this topic is unlocked again is this the place to report issues with the implemented Hue support in Domoticz like the one in this topic: http://www.domoticz.com/forum/viewtopic.php?f=23&t=9499.

gizmocuz wrote:

wmn79 wrote:Since this topic is unlocked again is this the place to report issues with the implemented Hue support in Domoticz like the one in this topic: http://www.domoticz.com/forum/viewtopic.php?f=23&t=9499.

Please only report issues with the native implementation here, not with scripts or other meanings

gizmocuz wrote:Question is, why do you need lua ?
If there is something missing in the native hue implementation in domoticz, maybe best if you look into this and supply a git pull request with a patch

gizmocuz wrote:I see you are running domoticz on your synology nas, i do not think version #4078+ is available for this correct?
If no, you have to wait until it is