Domoticz

Code: Select all

{
    "description" : "Configuration file for Domoticz platform",
    "bridge" : {
            "name" : "Homebridge",
            "username" : "XX:XX:XX:XX:XX:XX",
            "port" : 34473,
            "pin" : "031-45-154"
        },
    "platforms": [
        {
            "platform" : "eDomoticz",
            "name" : "eDomoticz",
            "server" : "127.0.0.1",
            "port" : "8080",
            "roomid" : 2,
            "loadscenes" : 0
       },
       {
            "platform" : "eDomoticz",
            "name" : "eDomoticz",
            "server" : "127.0.0.1",
            "port" : "8080",
            "roomid" : 3,
            "loadscenes" : 0
       },
       {
            "platform" : "eDomoticz",
            "name" : "eDomoticz",
            "server" : "127.0.0.1",
            "port" : "8080",
            "roomid" : 4,
            "loadscenes" : 0
       },
       {
            "platform" : "eDomoticz",
            "name" : "eDomoticz",
            "server" : "127.0.0.1",
            "port" : "8080",
            "roomid" : 5,
            "loadscenes" : 0
       },
       {
            "platform" : "eDomoticz",
            "name" : "eDomoticz",
            "server" : "127.0.0.1",
            "port" : "8080",
            "roomid" : 7,
            "loadscenes" : 0
       },
       {
            "platform" : "eDomoticz",
            "name" : "eDomoticz",
            "server" : "127.0.0.1",
            "port" : "8080",
            "roomid" : 8,
            "loadscenes" : 0
       }
    ],
    "accessories" : [
    ]
}

Code: Select all

Jan 13 16:39:23 domoticz-1 homebridge[646]: [1/13/2017, 4:39:23 PM] [eDomoticz] There was a problem connecting to Domoticz. (HTTP Status code 200)
Jan 13 16:39:23 domoticz-1 homebridge[646]: [object Object]

Code: Select all

    "bridge": {
        "name": "Homebridge",
        "username": "CC:21:3E:E4:DE:33",
        "port": 51826,
        "pin": "031-45-154"
    },
    "description": "Configuration file for (e)xtended Domoticz platform.",
    "platforms": [
        {
            "platform": "eDomoticz",
            "name": "eDomoticz",
            "server": "192.168.0.19",
            "port": "9090",
            "ssl": 0,
            "roomid": 0,
            "mqtt": 1
        }
    ],
    "accessories": [],
    "mqtt": {
            "host": "192.168.0.19",
            "port": 1234
        }
}

Code: Select all

[1/15/2017, 4:52:04 PM] [eDomoticz] Could not connect to MQTT broker! (192.168.0.27:1883)

Code: Select all

        ____                        _   _
     ___|  _ \  ___  _ __ ___   ___ | |_(_) _v0.2.3
    / _ | | | |/ _ \| '_ ` _ \ / _ \| __| |/ __|_  /
   |  __| |_| | (_) | | | | | | (_) | |_| | (__ / /
    \___|____/ \___/|_| |_| |_|\___/ \__|_|\___/___|
       www.npmjs.com/package/homebridge-edomoticz

   A Platform Plugin for HomeBridge by Marci & TheRamon
           [http://twitter.com/marcisshadow] 
           [http://domoticz.com/forum/memberlist.php?mode=viewprofile&u=10884]
  
From a clean install of Jessie on Raspberry Pi, booted up and connected to WLAN...

sudo apt-get update
sudo apt-get upgrade
sudo reboot

sudo apt-get install rpi-update
sudo BRANCH=next rpi-update    [fixes Wifi Ch12/13 issue with rPi3 WiFi]
iwconfig wlan0 power off       [fixes powermanagement issue with WiFi on all Raspberry Pi]

sudo touch /etc/network/if-up.d/wlan0                   [these lines make the powermanagement fix permanent]
sudo chmod +x /etc/network/if-up.d/wlan0
sudo chmod 777 /etc/network/if-up.d/wlan0
sudo echo -e '#!/bin/bash\niwconfig wlan0 power off' > /etc/network/if-up.d/wlan0
sudo chmod 755 /etc/network/if-up.d/wlan0

sudo reboot

[Installing Domoticz]
sudo curl -L install.domoticz.com | bash

[Only need to do the following lines if on RaspberryPi Model B / B+ / nonARM7 CPU]
sudo rm -rf /usr/local/{lib/node{,/.npm,_modules},bin,share/man}/{npm*,node*,man1/node*} /var/db/receipts/org.nodejs.*
hash -r
sudo su -c 'echo "deb https://deb.nodesource.com/armv6l-node/ weezy main" >> /etc/apt/sources.list'

##### per raspy 2 and 3
sudo curl -sL https://deb.nodesource.com/setup_0.12 | sudo bash -

###### per Raspy ZERO, usare questi comandi 
wget https://nodejs.org/dist/v4.4.5/node-v4.4.5-linux-armv6l.tar.gz
tar -xvf node-v4.4.5-linux-armv6l.tar.gz
cd node-v4.4.5-linux-armv6l
sudo cp -R * /usr/local/
sudo reboot

[otherwise continue from here]
sudo apt-get install -y build-essential python-rpi.gpio nodejs
sudo apt-get install libavahi-compat-libdnssd-dev
sudo apt-get install git
sudo apt-get install mosquitto
sudo npm install -g node-red --unsafe-perm
sudo wget https://raw.githubusercontent.com/node-red/raspbian-deb-package/master/resources/nodered.service -O /lib/systemd/system/nodered.service
sudo wget https://raw.githubusercontent.com/node-red/raspbian-deb-package/master/resources/node-red-start -O /usr/bin/node-red-start
sudo wget https://raw.githubusercontent.com/node-red/raspbian-deb-package/master/resources/node-red-stop -O /usr/bin/node-red-stop
sudo chmod +x /usr/bin/node-red-st*

sudo npm install -g homebridge --unsafe-perm
sudo npm install -g homebridge-edomoticz --unsafe-perm

mkdir ~/.homebridge
pico ~/.homebridge/config.json [refer to https://github.com/PatchworkBoy/homebridge-eDomoticz, ctrl-o to save, ctrl-x to exit]

sudo pico /lib/systemd/system/homebridge.service

#---Start Copy---#
[Unit]
Description=HomeBridge Service
After=multi-user.target

[Service]
User=pi
Type=idle
ExecStart=/usr/bin/homebridge

[Install]
WantedBy=multi-user.target
#---END Copy---#

[Paste (ctrl-v from win clients, cmd-v from Mac clients)
ctrl-o to save, ctrl-x to exit]

sudo chmod 644 /lib/systemd/system/homebridge.service
sudo systemctl daemon-reload
sudo systemctl enable homebridge.service
sudo systemctl enable nodered.service
sudo systemctl enable mosquitto.service

sudo apt-get install pi-bluetooth bluetooth bluez blueman [RaspberryPi 3 only]

sudo reboot

[done - navigate to the device in a web browser on port 8080, configure Domoticz, add sensors, reboot. Pair to the Homebridge from your iOS device.]


------------------------------------------

# Running Homebridge on Boot (/etc/rc.local) using Screen

# If you would like your Pi to start up HomeBridge automatically in a Screen session on reboot, you need to install Screen and edit the Pi's /etc/rc.local file.

Install Screen

       sudo apt-get install screen

Edit /etc/rc.local

       sudo nano /etc/rc.local

Add this line before the exit 0 line:

       su -c "screen -dmS homebridge homebridge" -s /bin/sh pi

Code: Select all

● homebridge.service - HomeBridge Service
   Loaded: loaded (/lib/systemd/system/homebridge.service; enabled)
   Active: failed (Result: exit-code) since Mon 2017-02-06 18:53:25 GMT; 2s ago
  Process: 2060 ExecStart=/usr/bin/homebridge (code=exited, status=203/EXEC)
 Main PID: 2060 (code=exited, status=203/EXEC)

Feb 06 18:53:25 pi systemd[1]: Started HomeBridge Service.
Feb 06 18:53:25 pi systemd[1]: homebridge.service: main process exited, code=exited, status=203/EXEC
Feb 06 18:53:25 pi systemd[1]: Unit homebridge.service entered failed state.