Domoticz

jvdz wrote:Yea, that all looks good, but what does it show when you click on the Log button for the "Lux sensor Woonkamer" ?
That should show whether values are actually send for the sensor.

Jos

jvdz wrote:That looks strange as I get a graph when I click on the Log button and no text at all..
Maybe recreate the dummy Lux sensor and try that new IDX, just to see if something went wrong during the creation process of the current one?

Jos

your-domoticz-url:port/json.htm?type=command&param=udevice&idx=577&svalue=10

astrapowerrr wrote: ↑Thursday 24 January 2019 21:28 You can get the text when you hit the 3 bars logo at the right top and select view data table...

jvdz wrote:You could also test the Dummy sensor by sending a value yourself through a JSON call:

Code: Select all

your-domoticz-url:port/json.htm?type=command&param=udevice&idx=577&svalue=10

Jos
EDIT:

astrapowerrr wrote: ↑Thursday 24 January 2019 21:28 You can get the text when you hit the 3 bars logo at the right top and select view data table...

Ah ..yes, that shows a similar table with the 5 minute interval.

jvdz wrote:Which version of domoticz are you using?
Could you try changing the espeasy setup to use 0 decimals in stead of 2 and see whether that works?

Jos

astrapowerrr wrote: ↑Thursday 24 January 2019 22:01 Tested it with jsonand that worked. So I can make sure the dummy is ok.?
And settings in espeasy also ok.

jvdz wrote: ↑Friday 25 January 2019 14:59 One more thing to check...

astrapowerrr wrote: ↑Thursday 24 January 2019 22:01 Tested it with jsonand that worked. So I can make sure the dummy is ok.?
And settings in espeasy also ok.

Correct, the dummy should be correct. It seems that the svalue isn't interpreted correctly (or send correctly to domoticz). You can also see that with the Temp/Hum device, it is only showing the integer part. Could you try testing with JSON including a decimal value with both a comma and decimal dot:
1: your-domoticz-url:port/json.htm?type=command&param=udevice&idx=577&nvalue=0&svalue=10.12
this gives the value of 10 lux in domoticz
2: your-domoticz-url:port/json.htm?type=command&param=udevice&idx=577&nvalue=0&svalue=10,23
this gives the value of 10 lux in domoticz

I also added the nvalue as that is more or less the url ESPEasy is creating.

Jos

You mentioned you are using the above version, so did you download the bin from develpment20 and load that or compile one yourself?
When you used the available bin, I will test with the exact same version to see what that does for my setup. Might be Sunday before I have the opportunity to do the testing but at least we know whether the issue is in that version of espeasy or not.

jvdz wrote:So it really looks like this version of ESPEasy has the problem in it for the LUX sensor.
I will test this sunday and let you know what I find.

Jos

jvdz wrote:Made it home early so just did a check and the issue is/was indeed in the change I've made in the development20 version.
Just loaded it on my ESP unit with the MH-Z19b; BMP085; DHT22 and 2*BH1750 Lux sensors and it was only updating the CO2, all others failed.
After checking what it actually send to domoticz it appeared had made an error for the MHZ19b.
Uploaded the fix to Github together with the new bin, so give that one a try.

Jos

astrapowerrr wrote: ↑Saturday 26 January 2019 23:25 thank you. That was the solution.
Now all my sensors are working.

astrapowerrr wrote: ↑Saturday 26 January 2019 23:25 Now I just want to add as a extra a gy-68 barometer.
That uses scl and sda.
I used those pins already for my lux sensor.
Can I add this parallel on those pins, or should I use other pins, or just not possible.

jvdz wrote:

astrapowerrr wrote: ↑Saturday 26 January 2019 23:25 thank you. That was the solution.
Now all my sensors are working.

Good to see it is working now and you are welcome.

astrapowerrr wrote: ↑Saturday 26 January 2019 23:25 Now I just want to add as a extra a gy-68 barometer.
That uses scl and sda.
I used those pins already for my lux sensor.
Can I add this parallel on those pins, or should I use other pins, or just not possible.

Those are the I2C bus pins so you can add multiple devices to it. I have 2 BH1750 and the BMP085 connected to them so should work fine.

Jos

jvdz wrote: ↑Sunday 27 January 2019 22:18 Isn't that simply an BMP180 that records Temp+Pressure?
If so select that device type in the Dummy sensor creation dropdown box and you should be good to go.

Jos

astrapowerrr wrote: ↑Monday 28 January 2019 19:34 I got it working with help of this link
https://www.letscontrolit.com/forum/vie ... 8&start=10
So now i have 1 temp/hum/baro dummy sensor filled with data in domoticz.

astrapowerrr wrote: ↑Monday 28 January 2019 19:34 Only 1 question left.(more domoticz related).
On the 24h graph from the co2 sensor, i saw in some graphs the text "good" or "bad".
in my graph i only see the different colors(darkness) what group my air is in but not the text.
is this a setting?