Domoticz

Hi Galadril

returning on Selector Switch, this is what I have in Domoticz:



and this is what I see on the app


Let me know if I can do any test to help solve it.

Thanks

woody4165 wrote:Let me know if I can do any test to help solve it.

Can you toggel 'ON'?
Do you see some layout changes when you do that?

Because there should be a dimmer bar.. and when you click on that bar, you see a dialog with all selector values

Shame on me that did't try to click ON.

I thought I can see directly all the values, but of course on mobile it's not possible.

So when I click On I see


and when I click on the slider I see


Sorry, my mistake that haven't pressed the On button.

It's working like a charm!!!

Thanks

Hm, updated the distance from 250 to 300m yesterday and geofencing seems to work ok now

Hi there.

App is still formidable, spoking about security, this app still need to "open to the big bad world" our home (port fwd).

Is there a chance that this will have a compatibility with MyDomoticz Proxy ?

I had the same issue with security, but in the end I opened up a port because I want to use geofencing, for this I forwarded a 5 digit port to my pi.

About Geofencing, I now have set the distance to 400 mtrs and still I get a leave/enter every now and then (for instance when I go into the basement).
When I enter the Geofencing config and I am at home I always get a 'entered zone' message (and the connected switch is set to on (again)

Is any chance to center text on grid view ?
Now is: Should be: Looks better and more clean.

Hi
The only issue I see with this App is that it's too slow for starting. It takes a lot to show the panel. This is a good App but this issue ...

I have a problem with some graphs. For instance, the week graph for temperature flashes up briefly and then disappears. Day, month, and year is ok though. For my lux sensor, none of the graphs display. Same symptom - brief flash.

Anyone else?

Same with me. I think that was already written in this thread, but good to remind.

Hello, I also have problems with blinds. They worked before the update. On Domoticz browser blinds are working fine. I'm on latest version: v3.4834. In the APP I'm on version: 0.1.253. I use Blinds Inverted. But also tried all other combination. ON/OFF buttons on APP doesn't have any function. Hope that you can help me. KInd regards,

Question about the Geofencing, which works fine basically....
However, even during the night, when the phone is on my nightstand, I seem to leave the house sometimes for about a minute. (Since I do not sleepwalk )
In Domoticz I solved this by creating an additional switch that switches off 5 minutes after I leave the area.

Is there may be a timeout for a position call in the code? Is there a way to see the distance in a logfile or so?

deennoo wrote:Hi there.

App is still formidable, spoking about security, this app still need to "open to the big bad world" our home (port fwd).

Is there a chance that this will have a compatibility with MyDomoticz Proxy ?

That would be a great addition, any plans to implement this?
Would be a nice addition for the pay version To win more people over for the pay version...

Yeah i would like that too.
Buy the premium version and support these guys!

The Geofencing works still strange.

Looking at Googles location history, I stayed at home all night last night , just a few deviations of about 20 metres.

The Domoticz app at least 3 times put me over 400 metres (which is the distance I set) away from home......

Hello, where can I find older version off APP to test if blinds are working there?

Hi, Is it correct that the graphs on the mobile contains empty places? Is that because I'm not connected to my home network or something? My webgraph is still running fine (on my NAS). Is it possible to sync the graph when connecting to the home network again?

Mobile:

Web:

Tranlate to German 100%

Jordyboytjuh wrote:Hi, Is it correct that the graphs on the mobile contains empty places? Is that because I'm not connected to my home network or something? My webgraph is still running fine (on my NAS). Is it possible to sync the graph when connecting to the home network again?

That's really weird because we receive a nice list with a lot of values which we plot.

RoadXY wrote:

Jordyboytjuh wrote:Hi, Is it correct that the graphs on the mobile contains empty places? Is that because I'm not connected to my home network or something? My webgraph is still running fine (on my NAS). Is it possible to sync the graph when connecting to the home network again?

That's really weird because we receive a nice list with a lot of values which we plot.

its probably just because of the scale of the graph..