Domoticz

Posted: **Sunday 16 April 2017 20:08**

robgeerts wrote:I'll do my best too did you mean chrome instead of safari?

Done.

I must tell you, that I really hate GitLab. Forking projects and keeping it up to date + merge requests are a nightmare. GitHub is so much better on this.
Every time I make a merge request I need to make a new fork (delete old one) and then make a merge request. Merge request page has it's own bugs too, for example the most simple task result in 404 error.

Ahhh, consider to move your project to GitHub.

Posted: **Sunday 16 April 2017 20:25**

Almost home, will check it out later. Well, i hate gitlab too. Used it for work but most of the time the site was offline or updating within working hours. I'll move to github soon..

Posted: **Sunday 16 April 2017 20:32**

Superb, GitHub at least have excellent GUI client and quality service I noticed outages on GitLab too, in the last days.

Posted: **Sunday 16 April 2017 21:02**

Yeahh i figured it out thanks

a few questions

- is it possible to get the temp and humidity in 1 box?
- make the letters and boxes bigger ?

Posted: **Sunday 16 April 2017 22:10**

Blueone wrote:
jake wrote:Please help a starter (me) to update the Wiki with the procedure to download (and for next time) update the files from gitlab. I cant find it online how to do this.
http://www.domoticz.com/wiki/Dashticz-v ... ugh_Gitlab

Thanks, but I don't understand how to do the following from the command line:
"To install Dashticz v2.0, download the latest version"

Posted: **Sunday 16 April 2017 22:14**

Found something else to add

Internet Ping

Code: Select all

{
   "ActTime" : 1492373513,
   "ServerTime" : "2017-04-16 22:11:53",
   "Sunrise" : "06:44",
   "Sunset" : "20:40",
   "result" : [
      {
         "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : 0.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 255,
         "CustomImage" : 0,
         "Data" : "35.346 ms",
         "Description" : "",
         "Favorite" : 0,
         "HardwareID" : 25,
         "HardwareName" : "SpeedTest",
         "HardwareType" : "Dummy (Does nothing, use for virtual switches only)",
         "HardwareTypeVal" : 15,
         "HaveTimeout" : true,
         "ID" : "00082115",
         "Image" : "Custom",
         "LastUpdate" : "2017-04-16 21:07:23",
         "Name" : "Ping",
         "Notifications" : "false",
         "PlanID" : "0",
         "PlanIDs" : [ 0 ],
         "Protected" : false,
         "SensorType" : 1,
         "SensorUnit" : "ms",
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "SubType" : "Custom Sensor",
         "Timers" : "false",
         "Type" : "General",
         "TypeImg" : "Custom",
         "Unit" : 1,
         "Used" : 1,
         "XOffset" : "0",
         "YOffset" : "0",
         "idx" : "115"
      }
   ],
   "status" : "OK",
   "title" : "Devices"
}

Upload

Code: Select all

{
   "ActTime" : 1492373459,
   "ServerTime" : "2017-04-16 22:10:59",
   "Sunrise" : "06:44",
   "Sunset" : "20:40",
   "result" : [
      {
         "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : 0.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 255,
         "CustomImage" : 0,
         "Data" : "104.88 Mbp/s",
         "Description" : "",
         "Favorite" : 0,
         "HardwareID" : 25,
         "HardwareName" : "SpeedTest",
         "HardwareType" : "Dummy (Does nothing, use for virtual switches only)",
         "HardwareTypeVal" : 15,
         "HaveTimeout" : true,
         "ID" : "00082116",
         "Image" : "Custom",
         "LastUpdate" : "2017-04-16 21:07:23",
         "Name" : "Download",
         "Notifications" : "false",
         "PlanID" : "0",
         "PlanIDs" : [ 0 ],
         "Protected" : false,
         "SensorType" : 1,
         "SensorUnit" : "Mbp/s",
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "SubType" : "Custom Sensor",
         "Timers" : "false",
         "Type" : "General",
         "TypeImg" : "Custom",
         "Unit" : 1,
         "Used" : 1,
         "XOffset" : "0",
         "YOffset" : "0",
         "idx" : "116"
      }
   ],
   "status" : "OK",
   "title" : "Devices"
}

download

Code: Select all

{
   "ActTime" : 1492373598,
   "ServerTime" : "2017-04-16 22:13:18",
   "Sunrise" : "06:44",
   "Sunset" : "20:40",
   "result" : [
      {
         "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : 0.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 255,
         "CustomImage" : 0,
         "Data" : "42.66 Mbp/s",
         "Description" : "",
         "Favorite" : 0,
         "HardwareID" : 25,
         "HardwareName" : "SpeedTest",
         "HardwareType" : "Dummy (Does nothing, use for virtual switches only)",
         "HardwareTypeVal" : 15,
         "HaveTimeout" : true,
         "ID" : "00082117",
         "Image" : "Custom",
         "LastUpdate" : "2017-04-16 21:07:23",
         "Name" : "Upload",
         "Notifications" : "false",
         "PlanID" : "0",
         "PlanIDs" : [ 0 ],
         "Protected" : false,
         "SensorType" : 1,
         "SensorUnit" : "Mbp/s",
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "SubType" : "Custom Sensor",
         "Timers" : "false",
         "Type" : "General",
         "TypeImg" : "Custom",
         "Unit" : 1,
         "Used" : 1,
         "XOffset" : "0",
         "YOffset" : "0",
         "idx" : "117"
      }
   ],
   "status" : "OK",
   "title" : "Devices"
}

To check internet-connectivity.

Posted: **Sunday 16 April 2017 22:34**

EdKo66 wrote:Found something else to add

Well, that was easy. Could have done so myself, and did. In this case just adding the IDx was enough.

Posted: **Sunday 16 April 2017 22:44**

irishv wrote: Were you able to resolve this? I'm running into the same issue. I'm running Domoticz on a Synology NAS and it has been stable for a few months. Since I started playing with the dashboard Domoticz seems to crash every couple days. The dashboard loads without showing any sensors/switches and the main Domoticz page says it's offline. If I stop the Domoticz service in the Synology Diskstation and restart it, everything comes up fine. Anyone else seeing anything like this?

I also use a Synology NAS and dont experience any problems...

wizjos wrote:Just noticed this. Although it is possible to give an alternative title to a block (blocks[140]['title'] = 'Temperatuur';), this goes for all 'sub-blocks'. In my case I have a 'buienradar-temperatuur' at idx 140 which produces 2 blocks: one for temperature and one for humidity...
I would be nice to give these sub-blocks different titles so I get 'Temperatuur' for the temperature and 'Luchtvochtigheid' for humidity.
Something like
Code: Select all
blocks['140_1']['title'] = 'Temperatuur';
blocks['140_2']['title'] = 'Luchtvochtigheid';

EdKo66 wrote:Got exactly the same problem.

Should work in latest version, please, could you test this?

axelbaas wrote:Maybe this question is already asked. But is it possible to change the size of the icons? On a smaller screen, like a iPad, the icons are too small to click them.
I've tried some custom css, but cannot find the right option (yet).

Try adding in custom.css, although 80 is a bit too big, but you get the idea:

Code: Select all

.fa,.wi {
	font-size:80px !important;
}

pvm wrote: My phone started complaining 'Domoticz error! Please, double check the path in _HOST_DOMOTICZ-variable!'. I upgraded today to the latest version (was running a couple of days behind). I tried the URL with and without username/password showing the same result. On my laptop however, I do not experience these issues. Strange.. any other people having a similar setup (PI with dashboard running on NAS) ?

Are you using a local-ip address for domoticz and is your phone on cellalur network by accident?

EdKo66 wrote:
EdKo66 wrote:Found something else to add
Well, that was easy. Could have done so myself, and did. In this case just adding the IDx was enough.

Because I fixed those devices a couple of days ago

madrian wrote:
robgeerts wrote:I'll do my best too did you mean chrome instead of safari?
Done.

Thanks, I made small changes to fit the design a bit more!

Radio Plugin

In config add:

Code: Select all

var _STREAMPLAYER_TRACKS  	= [
   {"track":1,"name":"Q-music","file":"http://icecast-qmusic.cdp.triple-it.nl/Qmusic_nl_live_96.mp3"},
   {"track":2,"name":"538 Hitzone","file":"http://vip-icecast.538.lw.triple-it.nl/WEB11_MP3"},
   {"track":3,"name":"Slam! NonStop","file":"http://stream.radiocorp.nl/web10_mp3"},
   {"track":4,"name":"100%NL","file":"http://stream.100p.nl/100pctnl.mp3"},
   {"track":5,"name":"StuBru","file":"http://mp3.streampower.be/stubru-high.mp3"},
];

(Find Mp3 sources at: http://www.hendrikjansen.nl/henk/streaming.html )

To enable, use the key: 'streamplayer' in the block definitions!

Posted: **Sunday 16 April 2017 22:55**

EdKo66 wrote:
EdKo66 wrote:Found something else to add
Well, that was easy. Could have done so myself, and did. In this case just adding the IDx was enough.

But did you get an image?
This is mine

: Schermafbeelding 2017-04-16 om 22.54.14.png (11.47 KiB) Viewed 1549 times

A question mark

Posted: **Sunday 16 April 2017 22:57**

Nope, no image yet. Need to find some. Thought I saw some in that topic.

Posted: **Sunday 16 April 2017 23:00**

When USE_AUTO_POSITIONING = True , why is the size of the weather image different

: Schermafbeelding 2017-04-16 om 22.56.30.png (95.27 KiB) Viewed 1548 times

Posted: **Sunday 16 April 2017 23:01**

robgeerts wrote:
wizjos wrote:Just noticed this. Although it is possible to give an alternative title to a block (blocks[140]['title'] = 'Temperatuur';), this goes for all 'sub-blocks'. In my case I have a 'buienradar-temperatuur' at idx 140 which produces 2 blocks: one for temperature and one for humidity...
I would be nice to give these sub-blocks different titles so I get 'Temperatuur' for the temperature and 'Luchtvochtigheid' for humidity.
Something like
Code: Select all
blocks['140_1']['title'] = 'Temperatuur';
blocks['140_2']['title'] = 'Luchtvochtigheid';
EdKo66 wrote:Got exactly the same problem.
Should work in latest version, please, could you test this?

Sorry, cannot confirm it works. Tried:

Code: Select all

blocks['140_1'] = {}
blocks['140_1']['title'] = 'Temperatuur';

in combination with:

Code: Select all

columns[2]['blocks'] = ['140_1']

and various combinations of this all...
Will look into it a little more tomorrow.

Wizjos

Posted: **Sunday 16 April 2017 23:02**

EdKo66 wrote:Nope, no image yet. Need to find some. Thought I saw some in that topic.

Try adding to config.js:

Code: Select all

blocks[1120] = {} //use idx of upload
blocks[1120]['icon'] = 'fa-long-arrow-up';

blocks[1120] = {} //use idx of download
blocks[1120]['icon'] = 'fa-long-arrow-down';

blocks[1120] = {} //use idx of ping
blocks[1120]['icon'] = 'fa-arrows-v';

Posted: **Sunday 16 April 2017 23:02**

jake wrote:
Blueone wrote:
jake wrote:Please help a starter (me) to update the Wiki with the procedure to download (and for next time) update the files from gitlab. I cant find it online how to do this.
http://www.domoticz.com/wiki/Dashticz-v ... ugh_Gitlab
Thanks, but I don't understand how to do the following from the command line:
"To install Dashticz v2.0, download the latest version"

Did you actually click on the link? It says:
Logon to your system with SSH and go to the \domoticz\www folder
Enter "git clone https://gitlab.com/robgeerts/dashboard.git" (withouth the ")
Etc..

Posted: **Sunday 16 April 2017 23:03**

wizjos wrote:
robgeerts wrote:
wizjos wrote:Just noticed this. Although it is possible to give an alternative title to a block (blocks[140]['title'] = 'Temperatuur';), this goes for all 'sub-blocks'. In my case I have a 'buienradar-temperatuur' at idx 140 which produces 2 blocks: one for temperature and one for humidity...
I would be nice to give these sub-blocks different titles so I get 'Temperatuur' for the temperature and 'Luchtvochtigheid' for humidity.
Something like
Code: Select all
blocks['140_1']['title'] = 'Temperatuur';
blocks['140_2']['title'] = 'Luchtvochtigheid';
EdKo66 wrote:Got exactly the same problem.
Should work in latest version, please, could you test this?
Sorry, cannot confirm it works. Tried:
Code: Select all
blocks['140_1'] = {}
blocks['140_1']['title'] = 'Temperatuur';
in combination with:
Code: Select all
columns[2]['blocks'] = ['140_1']
and various combinations of this all...
Will look into it a little more tomorrow.

Wizjos

And what about:

Code: Select all

columns[2]['blocks'] = [140]

Posted: **Sunday 16 April 2017 23:03**

EdKo66 wrote:Nope, no image yet. Need to find some. Thought I saw some in that topic.

Yep I made them (see attachments)

Posted: **Sunday 16 April 2017 23:04**

Dropshot wrote:
jake wrote:
Blueone wrote: http://www.domoticz.com/wiki/Dashticz-v ... ugh_Gitlab
Thanks, but I don't understand how to do the following from the command line:
"To install Dashticz v2.0, download the latest version"
Did you actually click on the link? It says:
Logon to your system with SSH and go to the \domoticz\www folder
Enter "git clone https://gitlab.com/robgeerts/dashboard.git" (withouth the ")
Etc..

Or download the zip:
https://gitlab.com/robgeerts/dashboard/ ... ref=master

And unpack it in a directory of your choice and open index.html in a webbrowser

Posted: **Sunday 16 April 2017 23:08**

gjaa wrote:When USE_AUTO_POSITIONING = True , why is the size of the weather image different
Schermafbeelding 2017-04-16 om 22.56.30.png

Try latest version I'v just pushed to Gitlab!

Posted: **Sunday 16 April 2017 23:15**

Thats quick
Its bigger but not the same

: Schermafbeelding 2017-04-16 om 23.13.42.png (53.26 KiB) Viewed 1545 times

Can I change it with custom css

Posted: **Sunday 16 April 2017 23:17**

robgeerts wrote:
EdKo66 wrote:Nope, no image yet. Need to find some. Thought I saw some in that topic.
Try adding to config.js:
Code: Select all
blocks[1120] = {} //use idx of upload
blocks[1120]['icon'] = 'fa-long-arrow-up';

blocks[1120] = {} //use idx of download
blocks[1120]['icon'] = 'fa-long-arrow-down';

blocks[1120] = {} //use idx of ping
blocks[1120]['icon'] = 'fa-arrows-v';

How can I edit when USE_AUTO_POSITIONING=True

Domoticz

Dashticz - General Discussions

Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens

Re: RE: Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens

Re: RE: Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens

Re: RE: Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens

Re: Dashticz v2.0, custom positioning and multiple screens