Event not working

[Varazir]

I have some problems with a blocky that worked fine.

Code: Select all

2016-07-31 15:11:53.588 (RaZberry) Usage (Computer_Curent_Consumption)
2016-07-31 15:11:53.611 (RaZberry) General/kWh (Computer_Tota_Consumption)
2016-07-31 15:11:55.087 (RaZberry) Usage (Computer_Curent_Consumption)
2016-07-31 15:11:55.109 (RaZberry) General/kWh (Computer_Tota_Consumption)
2016-07-31 15:12:05.587 (RaZberry) Usage (Computer_Curent_Consumption)
2016-07-31 15:12:05.609 (RaZberry) General/kWh (Computer_Tota_Consumption)
2016-07-31 15:12:13.089 (RaZberry) Usage (Computer_Curent_Consumption)
2016-07-31 15:12:13.125 (RaZberry) General/kWh (Computer_Tota_Consumption)

when I check Show current states it shows me

Code: Select all

	Onkyo_Curent_Consumption	0.0	2016-07-31 08:54:47	0.0
	Openelec_Curent_Consumption	0.0	2016-07-31 08:54:47	0.0

tv_off2.JPG (45.38 KiB) Viewed 879 times

zwave.JPG (82.74 KiB) Viewed 897 times

if I go to the OpenZWave Control Panel and run a refresh on the device the switches get turned off.

groups.JPG (65.2 KiB) Viewed 897 times

[Varazir]

I noticed if I enable polling it works too but that values get reseted after some time

[Varazir]

Is it only me who has this problem ?

[Varazir]

Auto healing network caused the problem