Event for Shed Intruder Alarm

[TheBod]

Hi all

I would like to create a blocky event to control a very basic intruder alarm system. The hardware would be;-

Lightwaverf JSJSLW904 Magnetic Switch - attached to shed door
Konig SAS-SA200 Wireless Smoke Alarm - installed within utility room


I would like to create the event so that;-
If - after Sunset and before Sunrise
and - Magnetic switch Open
Set - Smoke alarm On for 15 minutes
Send - email to email account


This is very basic and easy to create however I would also like to add the following logic;-
- If after 15 minutes the magnetic switch is still open, sound smoke alarm for another 5 minutes, then another 5 mins etc
- If at sunset the shed door is open (Magnetic switch open) i.e. I have left door open, then sound the smoke alarm at maybe 1 second intervals until closed

I obviously would also like to add some form of resetting the alarm apart from just closing the shed door, maybe using a RFID tag or even another switch (JSJSLW904 or other).

Does anyone have any ideas on the above.

I would also like to eventually replace my wired alarm system with a Domoticz built system so this would provide a good starter and platform for bigger projects.


Thanks

[TheBod]

Might not be so simple???

[JuanUil]

maybe, you could search the forum first and start your own project and THEN if you got any problems you could ask for help. better then an open question like this.

[TheBod]

Already have and looked through all the blocky's on google

[dervogt]

this might help you:
http://www.domoticz.com/wiki/Event_scri ... 10_minutes
or this might help as well:
http://www.domoticz.com/wiki/Alarm
it is a script example which detects the door status and takes action upon a set condition

[TheBod]

Thanks dervogt. I will take a look this evening. Is there anyway of doing this using blocky as I have not learnt Lua yet?

[dervogt]

I do not believe so, I am struggling to set a conditional timer for an outside lamp in Blockly and therfore very quickly went to LUA scripting for this purpose, but there are a lot more 'experts' than me who just migrated from Homeseer a few weeks ago