Compatible Smoke detectors
Moderator: leecollings
Compatible Smoke detectors
Hi,
I want to buy smoke detectors for in my house that I can connect with the RFXtrx433 transceiver. I don't want to spend to much money on it, 10 to 20 Euro.
On this forum and other forums I found that the following detectors are compatible "Chacon/Avidsen/NEXA.. KD101". I think this is the chip which is used by the smoke detector but I'm not sure.
I already found that the the Alecto SA-33 is compatible but the reviews aren't that good.
So, can U tell me which smoke detector you are using? Or a webshop where I can buy them? (I'm from Belgium)
Thanks!
Stijn
I want to buy smoke detectors for in my house that I can connect with the RFXtrx433 transceiver. I don't want to spend to much money on it, 10 to 20 Euro.
On this forum and other forums I found that the following detectors are compatible "Chacon/Avidsen/NEXA.. KD101". I think this is the chip which is used by the smoke detector but I'm not sure.
I already found that the the Alecto SA-33 is compatible but the reviews aren't that good.
So, can U tell me which smoke detector you are using? Or a webshop where I can buy them? (I'm from Belgium)
Thanks!
Stijn
-
- Posts: 890
- Joined: Tuesday 30 September 2014 8:49
- Target OS: Linux
- Domoticz version: beta
- Location: The Netherlands
- Contact:
Re: Compatible Smoke detectors
I read a lot of posts from people from NL who use the Flamingo FA20RF as they are quite cheap (sometimes in discount, 2 pieces for 13 euros or so).
I am not active on this forum anymore.
- Siewert308SW
- Posts: 288
- Joined: Monday 29 December 2014 15:47
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Stable
- Location: The Netherlands
- Contact:
Re: Compatible Smoke detectors
Seem like the FA20RF aint available in the netherlands anymore or i'm blind and can't find it.ThinkPad wrote:I read a lot of posts from people from NL who use the Flamingo FA20RF as they are quite cheap (sometimes in discount, 2 pieces for 13 euros or so).
I do have found the Flamingo FA21RF on Conrad.nl, 2 pieces for 35 Euro's.
https://www.conrad.nl/nl/flamingo-10001 ... 74875.html
Seem a fair deal but the question is, are they compatible with the RFXCOM and Domoticz.
Anybody using the Flamingo FA21RF?
Setup:
- RPi4 - Domo Stable / Aeotec Z-stick7 / PiHole Unbound Gemini
- RPi4 - PiHole / PiVPN Unbound Gemini
- Synology DS923+ / DS218j
- P1 Gas/Power, SmartGateway watermeter
- Fibaro switches, contacts, plugs, smoke/Co2 ect
- rootfs @ USB HDD
- RPi4 - Domo Stable / Aeotec Z-stick7 / PiHole Unbound Gemini
- RPi4 - PiHole / PiVPN Unbound Gemini
- Synology DS923+ / DS218j
- P1 Gas/Power, SmartGateway watermeter
- Fibaro switches, contacts, plugs, smoke/Co2 ect
- rootfs @ USB HDD
- Siewert308SW
- Posts: 288
- Joined: Monday 29 December 2014 15:47
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Stable
- Location: The Netherlands
- Contact:
Re: Compatible Smoke detectors
I knowThinkPad wrote:Buy & try
Hard thing to do without a job due bankruptcy of my boss...
If i know they are working i surly would buy them but not on spec and then the risk of not beeing able to return
Setup:
- RPi4 - Domo Stable / Aeotec Z-stick7 / PiHole Unbound Gemini
- RPi4 - PiHole / PiVPN Unbound Gemini
- Synology DS923+ / DS218j
- P1 Gas/Power, SmartGateway watermeter
- Fibaro switches, contacts, plugs, smoke/Co2 ect
- rootfs @ USB HDD
- RPi4 - Domo Stable / Aeotec Z-stick7 / PiHole Unbound Gemini
- RPi4 - PiHole / PiVPN Unbound Gemini
- Synology DS923+ / DS218j
- P1 Gas/Power, SmartGateway watermeter
- Fibaro switches, contacts, plugs, smoke/Co2 ect
- rootfs @ USB HDD
-
- Posts: 267
- Joined: Tuesday 14 January 2014 14:50
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Compatible Smoke detectors
I've got two of these linked and working well. I can activate them from Domoticz and have set notifications so I get alerted if they go off.
http://www.amazon.co.uk/gp/product/B00A ... ge_o02_s00
http://www.amazon.co.uk/gp/product/B00A ... ge_o02_s00
Running Domoticz on Pi3 with RFXtrx433e. LWRF power sockets and dimmer switches. Integrated my existing wirefree alarm PIRs and door contacts with domoticz. Geofencing with Pilot. Harmony Hub. Tado for Heating. Now playing with mysensors.
-
- Posts: 1
- Joined: Friday 16 January 2015 22:06
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: USA, Texas
- Contact:
Re: Compatible Smoke detectors
Hi all,
I am new to using Domoticz, I only have one device which is a First Alert Combined alarm. I am having issues trying to include it via my Aeon Stick.
I want to eliminate options before I buy more sensors, can anybody tell me if they got this smoke detector working on a Raspberry Pi with the Aeon v2 stick?
Or have got it working at all...
Thanks
I am new to using Domoticz, I only have one device which is a First Alert Combined alarm. I am having issues trying to include it via my Aeon Stick.
I want to eliminate options before I buy more sensors, can anybody tell me if they got this smoke detector working on a Raspberry Pi with the Aeon v2 stick?
Or have got it working at all...
Thanks
(Raspberry Pi B, Aeon Z-Stick)
- Siewert308SW
- Posts: 288
- Joined: Monday 29 December 2014 15:47
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Stable
- Location: The Netherlands
- Contact:
Re: Compatible Smoke detectors
Today is was a the Multimade (Dutch DIY shop) and saw a unknown brand smokedetector.
But had the looks of a FA20RF.
They weren't that expensive and talk to the shop owner.
If they weren't detected by the RFX then i could return them.
I bought 4 of these for just 30 Euro's
Just had a look and as i already thought the RFXtrx433E detected the smokedetector.
And just as i thought as a KD101 smoke detector meaning it's Flamingo/Elro FA20RF only cheaper...
This made my day...
But had the looks of a FA20RF.
They weren't that expensive and talk to the shop owner.
If they weren't detected by the RFX then i could return them.
I bought 4 of these for just 30 Euro's
Just had a look and as i already thought the RFXtrx433E detected the smokedetector.
And just as i thought as a KD101 smoke detector meaning it's Flamingo/Elro FA20RF only cheaper...
This made my day...
- Attachments
-
- IMAG0038_resize_resize.jpg (185.64 KiB) Viewed 19074 times
-
- IMAG0037_resize_resize.jpg (216.69 KiB) Viewed 19074 times
-
- IMAG0036_resize_resize.jpg (256.65 KiB) Viewed 19074 times
Setup:
- RPi4 - Domo Stable / Aeotec Z-stick7 / PiHole Unbound Gemini
- RPi4 - PiHole / PiVPN Unbound Gemini
- Synology DS923+ / DS218j
- P1 Gas/Power, SmartGateway watermeter
- Fibaro switches, contacts, plugs, smoke/Co2 ect
- rootfs @ USB HDD
- RPi4 - Domo Stable / Aeotec Z-stick7 / PiHole Unbound Gemini
- RPi4 - PiHole / PiVPN Unbound Gemini
- Synology DS923+ / DS218j
- P1 Gas/Power, SmartGateway watermeter
- Fibaro switches, contacts, plugs, smoke/Co2 ect
- rootfs @ USB HDD
-
- Posts: 2
- Joined: Tuesday 24 February 2015 17:46
- Target OS: Windows
- Domoticz version:
- Contact:
Re: Compatible Smoke detectors
Photos FA21RF
-
- Posts: 1
- Joined: Monday 16 February 2015 11:06
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Compatible Smoke detectors
just bought 4 for 58 EURO at www.lil.nl (till 2-3 5% off)
-
- Posts: 625
- Joined: Thursday 02 October 2014 6:36
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2022.2
- Location: Geleen
- Contact:
Re: Compatible Smoke detectors
Do they work (fa21rf) with Domoticz?
-
- Posts: 230
- Joined: Sunday 14 July 2013 20:21
- Target OS: Linux
- Domoticz version: 4.10233
- Location: Alkmaar, The Netherlands
- Contact:
Re: Compatible Smoke detectors
Just found this offer on ibood http://www.ibood.com/home-living-be/nl/ ... lders.html
-
- Posts: 625
- Joined: Thursday 02 October 2014 6:36
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2022.2
- Location: Geleen
- Contact:
Re: Compatible Smoke detectors
3 stuks Flamingo FA20RF besteld via iBood
-
- Posts: 5
- Joined: Monday 24 November 2014 22:17
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Compatible Smoke detectors
Since there is no official answer given to the question:
yes, the Flamingo FA21RF works perfect! They show up in the devices list and can be triggered from Domoticz.
yes, the Flamingo FA21RF works perfect! They show up in the devices list and can be triggered from Domoticz.
Re: Compatible Smoke detectors
I'd recommend you Kidde PI2010.
You can find it in Amazon in a very good price. It has very good reviews (prove: http://buildyoursmarthome.co/reviews/be ... -detector/)
And you can put it in every corner you need..
You can find it in Amazon in a very good price. It has very good reviews (prove: http://buildyoursmarthome.co/reviews/be ... -detector/)
And you can put it in every corner you need..
-
- Posts: 49
- Joined: Thursday 17 December 2015 22:24
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.5877
- Location: Norway
- Contact:
Re: Compatible Smoke detectors
I just wanted to say that I purchased Nexa 101LC smoke detector in Norway
(it looks exactly as this RM-101Lb from the pictures above) and it works great with RFLink
(it looks exactly as this RM-101Lb from the pictures above) and it works great with RFLink
Raspberry Pi 2 B - MySensors (dimmers, switches, motion, temperature, lux, humidity sensors)
zWave (220v switches)
various 433 via RFLink
zWave (220v switches)
various 433 via RFLink
-
- Posts: 37
- Joined: Monday 25 January 2016 21:36
- Target OS: Raspberry Pi / ODroid
- Domoticz version: V2.3530
- Location: Bergen, Norway
- Contact:
Re: Compatible Smoke detectors
Where did you find those smoke detecotrs dakipro? Do they have them on Clas? Couldnt locate them in their webshop.
- Egregius
- Posts: 2582
- Joined: Thursday 09 April 2015 12:19
- Target OS: Linux
- Domoticz version: v2024.7
- Location: Beitem, BE
- Contact:
Re: Compatible Smoke detectors
I don't have a good expirience with the fa20rf. Last year, all of the sudden one of them started beeping. He was only 3 or 4 months old.
Because we were not at home the neighbours went to the school of my son, he also could enter the home because the smoke detector blocked the entire 433Mhz range so the gate opener didn't respond. 6 Hours later when I got home they were still beeping, I instantly removed them and throw them all away.
Since that I bought the Fibaro smoke detectors, couldn't be more happy
Because we were not at home the neighbours went to the school of my son, he also could enter the home because the smoke detector blocked the entire 433Mhz range so the gate opener didn't respond. 6 Hours later when I got home they were still beeping, I instantly removed them and throw them all away.
Since that I bought the Fibaro smoke detectors, couldn't be more happy
-
- Posts: 49
- Joined: Thursday 17 December 2015 22:24
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.5877
- Location: Norway
- Contact:
Re: Compatible Smoke detectors
@larsja, I purchased them on Finn.no from someone who har pair, so he sold me one.
I had two missfirings with it thought, once in the middle of the night at 3am, no activity at home, second time when no one was home (it sends me 30 emails when it goes off, and I was a bit freaked out since noone was home, but it was false alarm).
Probably it is too close to the room ventilation, I read that cold air that blows in the house can trigger them, I will have to relocate it
I had two missfirings with it thought, once in the middle of the night at 3am, no activity at home, second time when no one was home (it sends me 30 emails when it goes off, and I was a bit freaked out since noone was home, but it was false alarm).
Probably it is too close to the room ventilation, I read that cold air that blows in the house can trigger them, I will have to relocate it
Raspberry Pi 2 B - MySensors (dimmers, switches, motion, temperature, lux, humidity sensors)
zWave (220v switches)
various 433 via RFLink
zWave (220v switches)
various 433 via RFLink
Who is online
Users browsing this forum: No registered users and 0 guests