Blockly examples

[mKotek]

Hello everybody,

Maybe someone can help me out with this small issue. These are my blocks:

2016_02_03_21_31_54_Domoticz.png

This works but when one phone is off and one phone is on the switch Iemand Thuis (Someone Home) is switching every second from on to off. When the second phone is coming online the switch keeps on like ik should. Why, when one phone is off, the switch is switching from on to off?

As far as I can see, in the second part, you should have AND instead of OR between the phones. As it is now, just one phone fulfils the condition and swithc is set to OFF. Next, it detects one phone and sets it to ON again.

[Martijn85]

Thanks for the fast reply mKotek, it seems that did the trick! Thank you

[Evelen]

Turn on a Light when open a door
This example will turn on a light when
1. A door is opening
2. It is between 22:00 and 07:00
A notification will be send everytime the is opening (00:00 - 24:00)

dooropenlighton.PNG

PS: The device Garagentor is the door (Garagentor = Garagedoor), the light is light is Licht Garage (Light Garage)

how to set a if-do inside a if-do?

[Yoshiii]

I don't know about curtains but with blinds you use Off for open and On for closed

Thanks! That makes sense!

Does the script work now? I cannot get my blinds to work...

[brianprak]

Whats wrong with the following blockly i get an error 'then' expected near 'comparevariable'

[StanHD]

Hi, I think the problem is in the Else if section where the "On & "Or" are incorrectly arranged. Try right clicking all of the "And" "Or" blocks and setting them as "External Inputs" It might be easier to see the logic then.

[djgodlike]

Whats wrong with the following blockly i get an error 'then' expected near 'comparevariable'

Compare with this picture very precisely!

uploadfromtaptalk1456261191844.png (25.96 KiB) Viewed 4408 times

[marktn]

Hello,

I have made my first blocky event.
Is it possible to test this, without waiting till the sunn is under? (simultion of a day)
The script is sending nog from 23:00 till 00:00 email, a lot of emails!! I just want one email that i am not at home. How to do this?

Afwezig.png (24.67 KiB) Viewed 4352 times

Thanks for reading,
Mark

[sweup]

Hi

I have build a Blockly with a manual switch to toggle alarm on/off.
Unfortunately my alarm not working, when I set my alarm "on", the alarm goes off - I want to set blockly to "when alarm is on and sensor 1 register motion, I will be notified and siren should beep". What I have done wrong?

Im using Aeon labs sensor+Razberry

[JayKudo]

So I am trying to create a group dimmer and want to use blocky for it.

How can I detect a change in a (virtual) dimmer switch. So if the virtual switch changes value, than I want to set two real dimmers to that value.

Do I need to create a user var and save the current value and than compare the value with the virtual dimmer, or is there an easier method (or should I use blocky at all for this)?

[assenzuid]

I have created below blockly, but unfortunately it's not working.

Capture.JPG (32.38 KiB) Viewed 4006 times

[assenzuid]

I have created below blockly, but unfortunately it's not working.
Capture.JPG

Solved by using.

Capture.JPG (10.27 KiB) Viewed 4005 times

[micbou]

so what am I doing wrong here? this feels so straight forward but it doesn't work

snip_20160605203940.png (16.06 KiB) Viewed 3695 times

[hjvingen]

so what am I doing wrong here? this feels so straight forward but it doesn't work

snip_20160605203940.png

Please try again with setting the group to "on" instead of "active",
this works for me.

[micbou]

Unfortunatly not working neither. Time doesn't seem to work in any scenario and Domoticz does show the correct time.

[hjvingen]

Unfortunatly not working neither. Time doesn't seem to work in any scenario and Domoticz does show the correct time.

Do you get something in the log, like this?

Schermafbeelding 2016-06-05 om 21.04.28.png (12.12 KiB) Viewed 3688 times

Do other events (not time related) work?

[micbou]

No, the log shows no activity from the event.

Only events that seem to work are those activating a device after a device has been activated (for example 'turn on left light when the right light is on)

[hjvingen]

That's strange, because the event system is working but somehow the time related triggers don't work.

in the editor there is also a selector which can be set to time or device, did you already try these?

Schermafbeelding 2016-06-05 om 21.35.29.png (34.73 KiB) Viewed 3662 times

[micbou]

Yup, tried that too...

Schermafbeelding 2016-06-05 om 21.48.43.png (56.45 KiB) Viewed 3660 times

[micbou]

and its weird because below does work

Schermafbeelding 2016-06-05 om 22.03.06.png (28.71 KiB) Viewed 3657 times