Hi. I have some problem to get correct readings from my powerreader as you can see in the picture above.
probably I have written something wrong in the configuration, but what?
Picture of info/config):
Help with setup, NortQ PowerReader NQ-9021
Moderator: leecollings
-
Evelen
- Posts: 234
- Joined: Thursday 09 July 2015 12:03
- Target OS: Linux
- Domoticz version: 2.4538
- Location: Norway
- Contact:
Help with setup, NortQ PowerReader NQ-9021
Hi. I have some problem to get correct readings from my powerreader as you can see in the picture above.
probably I have written something wrong in the configuration, but what?
Picture of info/config):
-
Evelen
- Posts: 234
- Joined: Thursday 09 July 2015 12:03
- Target OS: Linux
- Domoticz version: 2.4538
- Location: Norway
- Contact:
Re: Help with setup, NortQ PowerReader NQ-9021
fixed
Pulse factor = 10000
Test ok:
29.02.2016 kl 07:45: SKAP: 60673 <XXX>: 22.668 <YYY> 10.080
29.02.2016 kl 19:00: SKAP: 60690 <XXX>: 39.658 <YYY> 27.070
Dfferanser:
SKAP: 60690 - 60673 = 17
<XXX>: 39.658 - 22.668 = 16,99
<YYY>: 27.070 - 10.080 = 16,99
But is is possible to show the Watt?
Pulse factor = 10000
Test ok:
29.02.2016 kl 07:45: SKAP: 60673 <XXX>: 22.668 <YYY> 10.080
29.02.2016 kl 19:00: SKAP: 60690 <XXX>: 39.658 <YYY> 27.070
Dfferanser:
SKAP: 60690 - 60673 = 17
<XXX>: 39.658 - 22.668 = 16,99
<YYY>: 27.070 - 10.080 = 16,99
But is is possible to show the Watt?