RGBW Bulb in Domoticz?
Moderator: leecollings
-
- Posts: 234
- Joined: Thursday 09 July 2015 12:03
- Target OS: Linux
- Domoticz version: 2.4538
- Location: Norway
- Contact:
RGBW Bulb in Domoticz?
Hi.
I want to buy some RGBW lights to use in domoticz, like this:
https://www.tronika.no/no/lysstyring/83 ... zw098.html
And I have some question:
1. do I need some additional hardware-equipment to use this? (I have a UZB1 Z-Wave interface)
2. Is it posible to use this and change colors and stuff in Domoticz? And how easy is it relative to normal on/off switshes?
I'm not a very advanced user, so I want to avoid scripting
I want to buy some RGBW lights to use in domoticz, like this:
https://www.tronika.no/no/lysstyring/83 ... zw098.html
And I have some question:
1. do I need some additional hardware-equipment to use this? (I have a UZB1 Z-Wave interface)
2. Is it posible to use this and change colors and stuff in Domoticz? And how easy is it relative to normal on/off switshes?
I'm not a very advanced user, so I want to avoid scripting
Last edited by ThinkPad on Wednesday 02 December 2015 11:23, edited 1 time in total.
Reason: Titlefix: Bulp --> Bulb
Reason: Titlefix: Bulp --> Bulb
-
- Posts: 28
- Joined: Thursday 15 October 2015 19:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Contact:
Re: RGBW Bulp in Domoticz?
Please look at milight or Philips hue these work out of the box with domoticz
Verstuurd vanaf mijn ONE A2003 met Tapatalk
Verstuurd vanaf mijn ONE A2003 met Tapatalk
-
- Posts: 234
- Joined: Thursday 09 July 2015 12:03
- Target OS: Linux
- Domoticz version: 2.4538
- Location: Norway
- Contact:
Re: RGBW Bulp in Domoticz?
are these Wifi or Z-Wave?locogek wrote:Please look at milight or Philips hue these work out of the box with domoticz
link plz
-
- Posts: 28
- Joined: Thursday 15 October 2015 19:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Contact:
Re: RGBW Bulp in Domoticz?
WiFi with bridge
Verstuurd vanaf mijn ONE A2003 met Tapatalk
Verstuurd vanaf mijn ONE A2003 met Tapatalk
-
- Posts: 234
- Joined: Thursday 09 July 2015 12:03
- Target OS: Linux
- Domoticz version: 2.4538
- Location: Norway
- Contact:
Re: RGBW Bulp in Domoticz?
just some cheape stuff from ebay?
http://www.ebay.com/sch/i.html?_from=R4 ... t&_sacat=0
what do you meen by bridge?
http://www.ebay.com/sch/i.html?_from=R4 ... t&_sacat=0
what do you meen by bridge?
-
- Posts: 28
- Joined: Thursday 15 October 2015 19:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Contact:
Re: RGBW Bulp in Domoticz?
Yes it's really cheap. On aliexpress you can get a gu10 rgbww for just 10 euros. A bridge is a device that you connect to your router with WiFi or cable and allows you to control the light. They do that because the light can be cheaper and less energy consumption. Philips is the better and more expensive way then milight
Verstuurd vanaf mijn ONE A2003 met Tapatalk
Verstuurd vanaf mijn ONE A2003 met Tapatalk
-
- Posts: 234
- Joined: Thursday 09 July 2015 12:03
- Target OS: Linux
- Domoticz version: 2.4538
- Location: Norway
- Contact:
Re: RGBW Bulp in Domoticz?
Ok, so if I understand you correct.
I Can buy one of these: http://www.milight.com/milight-wifi-rec ... oller-box/ (that is compatible with Domoticz?)
And than buy MILIGHT RGBW bulps and than controll them via domoticz? (also, if i have more then one bulp, can i controll them individually?
I Can buy one of these: http://www.milight.com/milight-wifi-rec ... oller-box/ (that is compatible with Domoticz?)
And than buy MILIGHT RGBW bulps and than controll them via domoticz? (also, if i have more then one bulp, can i controll them individually?
-
- Posts: 28
- Joined: Thursday 15 October 2015 19:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Contact:
Re: RGBW Bulp in Domoticz?
Yes you can add the milight bridge in domoticz. Be aware that a milight bridge only can Control 4 different groups. Each group can contain more lights but they will switch at the same time then.
Verstuurd vanaf mijn ONE A2003 met Tapatalk
Verstuurd vanaf mijn ONE A2003 met Tapatalk
-
- Posts: 234
- Joined: Thursday 09 July 2015 12:03
- Target OS: Linux
- Domoticz version: 2.4538
- Location: Norway
- Contact:
Re: RGBW Bulp in Domoticz?
Aha so for example i can have:
- 4 separate bulps and controll them individual
or:
- 3 bulp to control individual and a group whit 2 (to controll at the same time)
I guess I just need to buy more controllers if i need more.
Anyway, can i se a screenshot og video from the Domoticz GUI whit Milight?
- 4 separate bulps and controll them individual
or:
- 3 bulp to control individual and a group whit 2 (to controll at the same time)
I guess I just need to buy more controllers if i need more.
Anyway, can i se a screenshot og video from the Domoticz GUI whit Milight?
-
- Posts: 28
- Joined: Thursday 15 October 2015 19:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Contact:
Re: RGBW Bulp in Domoticz?
4 seperate groups on 1 bridge. example for one bridge:
group1: bulb RGBW
group2: Spot1 RGBW, Spot2 RGBW, Spot3 RGBW, etc. (control them together)
group3: LED strip RGBW
group4: Bulb RGBW
For now there are a view drawbacks on controlling them with domoticz. you can have only a few hondred different colors.
You can't use the white and colors together. Only one white color possible.
This is how it looks like in domoticz it's the same as for the hue:
https://www.google.nl/url?sa=i&rct=j&q= ... 5094750174
group1: bulb RGBW
group2: Spot1 RGBW, Spot2 RGBW, Spot3 RGBW, etc. (control them together)
group3: LED strip RGBW
group4: Bulb RGBW
For now there are a view drawbacks on controlling them with domoticz. you can have only a few hondred different colors.
You can't use the white and colors together. Only one white color possible.
This is how it looks like in domoticz it's the same as for the hue:
https://www.google.nl/url?sa=i&rct=j&q= ... 5094750174
-
- Posts: 234
- Joined: Thursday 09 July 2015 12:03
- Target OS: Linux
- Domoticz version: 2.4538
- Location: Norway
- Contact:
Re: RGBW Bulb in Domoticz?
Hi again
Do i Need any scriping to get this to work or will it work right in the GUI?
I already have a PHILIPS 69143-65-PH
http://www.p4c.philips.com/cgi-bin/dcbi ... =6914365PH
If i buy a Phillips bridge, will this be compatible?
Also, should I then buy the new bridge? (is it better than the old one?)
Do i Need any scriping to get this to work or will it work right in the GUI?
I already have a PHILIPS 69143-65-PH
http://www.p4c.philips.com/cgi-bin/dcbi ... =6914365PH
If i buy a Phillips bridge, will this be compatible?
Also, should I then buy the new bridge? (is it better than the old one?)
-
- Posts: 1601
- Joined: Friday 18 October 2013 23:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: BETA
- Location: Arnhem/Nijmegen Nederland
- Contact:
Re: RGBW Bulb in Domoticz?
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups
-
- Posts: 234
- Joined: Thursday 09 July 2015 12:03
- Target OS: Linux
- Domoticz version: 2.4538
- Location: Norway
- Contact:
Re: RGBW Bulb in Domoticz?
how mutch do you want inkl shipping to norway?
altso, is the bridge the 3.0?
also, can I use non-RGBW with RGBW?
-
- Posts: 17
- Joined: Monday 30 November 2015 13:32
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.8755
- Location: CZ
- Contact:
Re: RGBW Bulb in Domoticz?
I have that Z-wave LED RGBW Lamp - ZW098 from Aeotec. I can answer your questions:
1. no. It is like any other z-wave device. You just secure include the lamp and then you can control on/off and set a color from Domoticz. See my post here.
2. yes, you can change color directly in domoticz. See the picture:
1. no. It is like any other z-wave device. You just secure include the lamp and then you can control on/off and set a color from Domoticz. See my post here.
2. yes, you can change color directly in domoticz. See the picture:
Domoticz on RaZberry, OZW 1.4-2713
Aeotec MultiSensor 6, Aeotec LED Bulb, Vision ZD2102 Door/Window Sensor, Vision ZP3102 PIR Motion Sensor, D-Link Siren DCH-Z510, Fibaro Smoke Sensor FGSD002, Aeotec Key Fob, Qubino ZMNHDD1 Z-Wave Plus Flush Dimmer
Aeotec MultiSensor 6, Aeotec LED Bulb, Vision ZD2102 Door/Window Sensor, Vision ZP3102 PIR Motion Sensor, D-Link Siren DCH-Z510, Fibaro Smoke Sensor FGSD002, Aeotec Key Fob, Qubino ZMNHDD1 Z-Wave Plus Flush Dimmer
-
- Posts: 234
- Joined: Thursday 09 July 2015 12:03
- Target OS: Linux
- Domoticz version: 2.4538
- Location: Norway
- Contact:
Re: RGBW Bulb in Domoticz?
Hi and thx for info.
Is the case of GUI the same in I usa a non-ZWave bulp like AppLamp with bridge?
Is the case of GUI the same in I usa a non-ZWave bulp like AppLamp with bridge?
-
- Posts: 17
- Joined: Monday 30 November 2015 13:32
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.8755
- Location: CZ
- Contact:
Re: RGBW Bulb in Domoticz?
I am sorry I have no idea but I think so.
Domoticz on RaZberry, OZW 1.4-2713
Aeotec MultiSensor 6, Aeotec LED Bulb, Vision ZD2102 Door/Window Sensor, Vision ZP3102 PIR Motion Sensor, D-Link Siren DCH-Z510, Fibaro Smoke Sensor FGSD002, Aeotec Key Fob, Qubino ZMNHDD1 Z-Wave Plus Flush Dimmer
Aeotec MultiSensor 6, Aeotec LED Bulb, Vision ZD2102 Door/Window Sensor, Vision ZP3102 PIR Motion Sensor, D-Link Siren DCH-Z510, Fibaro Smoke Sensor FGSD002, Aeotec Key Fob, Qubino ZMNHDD1 Z-Wave Plus Flush Dimmer
- cyberclwn
- Posts: 103
- Joined: Thursday 20 August 2015 22:53
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: The Netherlands
- Contact:
Re: RGBW Bulb in Domoticz?
Yes, it is the same for applamp/ Milight.Evelen wrote:Hi and thx for info.
Is the case of GUI the same in I usa a non-ZWave bulp like AppLamp with bridge?
3xPi 2B (Domoticz "live", Domoticz "sandbox", PhotoFrame)
RFXCom433(E), KaKu, Oregon Scientific, Keyes 2-relay, Logitech Media Server, MiLight, Smartwares heating controller(2x), IR Send/Receive, Keyes PIR, XH-M131 DuskSensor, DHT22/11
RFXCom433(E), KaKu, Oregon Scientific, Keyes 2-relay, Logitech Media Server, MiLight, Smartwares heating controller(2x), IR Send/Receive, Keyes PIR, XH-M131 DuskSensor, DHT22/11
Who is online
Users browsing this forum: No registered users and 1 guest