Fibaro Switch FGS222 - turns off after 20 seconds

[Twan]

Hi.

I have a FIBARO System FGS222 Double Relay Switch 2x1.5kW.

But I can not get it to be turned on for longer then 20 seconds.

What could cause this behaviour?

grtz,
Twan

[gizmocuz]

Hi Twan,

things to check:
- make sure if you edit the switch in domoticz, that you did not specify an off delay value (0=no off delay)
- in the hardware setup of openzwave, select the node and check the configuration, there are settings for an auto off delay here as well:

Parameter No. 3 - Auto off relay after specified time, with the possibility of manual override - immediate Off after button push.
Parameter No. 4 - Auto off for relay 1.
Parameter No. 5 - Auto off for relay 2.

Also make sure there is no more load on the relays then 1.5kW

[Twan]

Setting Parameter 4 and 5 to 0 did the trick.

Sometimes the descriptions with the many parameters can by quite confusing.

grtz,
Twan

This topic can be closed.

[gizmocuz]

Its just in the manual