SolarEdge in Latest Beta / Port Number
Moderator: leecollings
-
- Posts: 625
- Joined: Thursday 02 October 2014 6:36
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2022.2
- Location: Geleen
- Contact:
Re: SolarEdge in Latest Beta / Port Number
Looks like the data from the solaredge is only presented when the data can be forwarded to the solaredge portal. At the moment I get no data in my Domoticz setup and no data in Solaredge. My brother who only uses Solaredge has no data either. Is this intentionally?
-
- Posts: 14
- Joined: Monday 02 February 2015 21:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2.2336
- Location: Netherlands
- Contact:
Re: SolarEdge in Latest Beta / Port Number
Same here no data on either one ?
-
- Posts: 12
- Joined: Monday 15 September 2014 11:18
- Target OS: Raspberry Pi / ODroid
- Domoticz version: latest
- Location: 8281
- Contact:
Re: SolarEdge in Latest Beta / Port Number
hi to all,
Same here no connection/data from SE 2200 after shutdown yseterdat evening, system running on Smartmeter, I thought complete system is down , but it is only communication to Raspberry.
Same here no connection/data from SE 2200 after shutdown yseterdat evening, system running on Smartmeter, I thought complete system is down , but it is only communication to Raspberry.
-
- Posts: 625
- Joined: Thursday 02 October 2014 6:36
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2022.2
- Location: Geleen
- Contact:
Re: SolarEdge in Latest Beta / Port Number
Looks like a problem at solaredge. Would be nice though if Domoticz would present the data no matter what the connection with Solaredge is.
-
- Posts: 12
- Joined: Monday 15 September 2014 11:18
- Target OS: Raspberry Pi / ODroid
- Domoticz version: latest
- Location: 8281
- Contact:
Re: SolarEdge in Latest Beta / Port Number
Yes Jan,
I agree, stupid sytem when we are depending from Solar Edge completely to log figures.
To avoid misunderstanding I'm talking about the SolarEdge sytem, server SA was down so we are not able to logdate. Limitations from producer and thats stupid.
I agree, stupid sytem when we are depending from Solar Edge completely to log figures.
To avoid misunderstanding I'm talking about the SolarEdge sytem, server SA was down so we are not able to logdate. Limitations from producer and thats stupid.
-
- Posts: 116
- Joined: Saturday 13 July 2013 13:28
- Target OS: Linux
- Domoticz version: Latest
- Location: Hilversum, The Netherlands
- Contact:
Re: SolarEdge in Latest Beta / Port Number
Do we have a volunteer to implement this?jan_nl wrote:Looks like a problem at solaredge. Would be nice though if Domoticz would present the data no matter what the connection with Solaredge is.
Rasp Pi 2B: 3x DS18S20 (1-wire), BME280 (i2c)
Cubietruck 1: Aeotec Z-Wave+, RFXtrx433XL+P1, RFXtrx868, TE923 display, SolarEdge API
Cubietruck 2: Aeotec Z-Wave, Voltcraft CO-20
Cubietruck 1: Aeotec Z-Wave+, RFXtrx433XL+P1, RFXtrx868, TE923 display, SolarEdge API
Cubietruck 2: Aeotec Z-Wave, Voltcraft CO-20
-
- Posts: 6
- Joined: Thursday 19 March 2015 11:54
- Target OS: Linux
- Domoticz version: Latest
- Location: Apeldoorn
- Contact:
Re: SolarEdge in Latest Beta / Port Number
I would sure like to help, but first I have to finish some exams this week...
-
- Posts: 4
- Joined: Wednesday 25 March 2015 11:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: SolarEdge in Latest Beta / Port Number
Data on domoticz not realtime it's now 10.39 and the data are from 10.03 and to the solaredge layout 10.38 can anyone helping me whit this.
-
- Posts: 116
- Joined: Saturday 13 July 2013 13:28
- Target OS: Linux
- Domoticz version: Latest
- Location: Hilversum, The Netherlands
- Contact:
Re: SolarEdge in Latest Beta / Port Number
Can you be more specific? Read you own post again and use intonations!collinneke wrote:Data on domoticz not realtime it's now 10.39 and the data are from 10.03 and to the solaredge layout 10.38 can anyone helping me whit this.
As far as i can see right now, all works fine.
Rasp Pi 2B: 3x DS18S20 (1-wire), BME280 (i2c)
Cubietruck 1: Aeotec Z-Wave+, RFXtrx433XL+P1, RFXtrx868, TE923 display, SolarEdge API
Cubietruck 2: Aeotec Z-Wave, Voltcraft CO-20
Cubietruck 1: Aeotec Z-Wave+, RFXtrx433XL+P1, RFXtrx868, TE923 display, SolarEdge API
Cubietruck 2: Aeotec Z-Wave, Voltcraft CO-20
-
- Posts: 4
- Joined: Wednesday 25 March 2015 11:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: SolarEdge in Latest Beta / Port Number
Sorry for my bad english,
When i take look by domoticz on the solaredge device can i sea: Last turn on: 2015-04-07 16:07:57
when i take a look to the monitor of solaredge (http://www.solaredge.com) is the last that i can sea 16:53
domoticz monitor do not update the real time when they send to solaredge
The solaredge inverter send to domoticz and domoticz to http://www.solaredge.com/
I hope that you can now understand me
When i take look by domoticz on the solaredge device can i sea: Last turn on: 2015-04-07 16:07:57
when i take a look to the monitor of solaredge (http://www.solaredge.com) is the last that i can sea 16:53
domoticz monitor do not update the real time when they send to solaredge
The solaredge inverter send to domoticz and domoticz to http://www.solaredge.com/
I hope that you can now understand me
-
- Posts: 116
- Joined: Saturday 13 July 2013 13:28
- Target OS: Linux
- Domoticz version: Latest
- Location: Hilversum, The Netherlands
- Contact:
SolarEdge in Latest Beta / Port Number
I know how it Works, because we made it.
The Inverter sends iTS data to the solaredge portal and we show this in Domoticz. These info is correct (at least on my System, and some other users). I checked this multiple times since we have this working.
Can you show some logs/foto's/print screens to clarify your issue?
The Inverter sends iTS data to the solaredge portal and we show this in Domoticz. These info is correct (at least on my System, and some other users). I checked this multiple times since we have this working.
Can you show some logs/foto's/print screens to clarify your issue?
Rasp Pi 2B: 3x DS18S20 (1-wire), BME280 (i2c)
Cubietruck 1: Aeotec Z-Wave+, RFXtrx433XL+P1, RFXtrx868, TE923 display, SolarEdge API
Cubietruck 2: Aeotec Z-Wave, Voltcraft CO-20
Cubietruck 1: Aeotec Z-Wave+, RFXtrx433XL+P1, RFXtrx868, TE923 display, SolarEdge API
Cubietruck 2: Aeotec Z-Wave, Voltcraft CO-20
-
- Posts: 4
- Joined: Wednesday 25 March 2015 11:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: SolarEdge in Latest Beta / Port Number
I have now two print sceenes maked
Look at the time.
Look at the time.
-
- Posts: 116
- Joined: Saturday 13 July 2013 13:28
- Target OS: Linux
- Domoticz version: Latest
- Location: Hilversum, The Netherlands
- Contact:
Re: SolarEdge in Latest Beta / Port Number
No problem here.
- Attachments
-
- se.PNG (229.63 KiB) Viewed 4675 times
Rasp Pi 2B: 3x DS18S20 (1-wire), BME280 (i2c)
Cubietruck 1: Aeotec Z-Wave+, RFXtrx433XL+P1, RFXtrx868, TE923 display, SolarEdge API
Cubietruck 2: Aeotec Z-Wave, Voltcraft CO-20
Cubietruck 1: Aeotec Z-Wave+, RFXtrx433XL+P1, RFXtrx868, TE923 display, SolarEdge API
Cubietruck 2: Aeotec Z-Wave, Voltcraft CO-20
-
- Posts: 4
- Joined: Wednesday 25 March 2015 11:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: SolarEdge in Latest Beta / Port Number
How have you connect the solaredge inverter with wifi or lan, and what are you settings, my connecting are wifi.
My inverter are se5000.
My inverter are se5000.
-
- Posts: 6
- Joined: Thursday 19 March 2015 11:54
- Target OS: Linux
- Domoticz version: Latest
- Location: Apeldoorn
- Contact:
Re: SolarEdge in Latest Beta / Port Number
Mine is connected through WiFi and it is a SE3000, but don't see anything in Domoticz...
-
- Posts: 14
- Joined: Monday 02 February 2015 21:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2.2336
- Location: Netherlands
- Contact:
Re: SolarEdge in Latest Beta / Port Number
My inverter is SE7000, upload through Domoticz to Solaredge monitoring works perfect, but after a few weeks still no extra devices are created in Domoticz ?
-
- Posts: 625
- Joined: Thursday 02 October 2014 6:36
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2022.2
- Location: Geleen
- Contact:
Re: SolarEdge in Latest Beta / Port Number
Do you have rhe allow new devices enabled in the settings?
-
- Posts: 14
- Joined: Monday 02 February 2015 21:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2.2336
- Location: Netherlands
- Contact:
Re: SolarEdge in Latest Beta / Port Number
Yes, and all the new z-wave devices i added afterwards are all working properly, only solar edge gives no new devices, beats me?
-
- Posts: 12
- Joined: Monday 15 September 2014 11:18
- Target OS: Raspberry Pi / ODroid
- Domoticz version: latest
- Location: 8281
- Contact:
Re: SolarEdge in Latest Beta / Port Number
hi,
After changing from the SE2200 to the SE3000, logging is not working anymore.
SE3000 is detected once with the folowing remarks in logging.
Error: SolarEdge: Unknown Type: 1408
Error: SolarEdge: Something not handled correctly, having extra bytes!
Tried everything but not show in devices sytem running now is beta 2382.
figures are forwarded to Solar Edge but not showing up in domoticz
Devices detecting is on, changed ip adres etc. Please advice
After changing from the SE2200 to the SE3000, logging is not working anymore.
SE3000 is detected once with the folowing remarks in logging.
Error: SolarEdge: Unknown Type: 1408
Error: SolarEdge: Something not handled correctly, having extra bytes!
Tried everything but not show in devices sytem running now is beta 2382.
figures are forwarded to Solar Edge but not showing up in domoticz
Devices detecting is on, changed ip adres etc. Please advice
-
- Posts: 12
- Joined: Monday 15 September 2014 11:18
- Target OS: Raspberry Pi / ODroid
- Domoticz version: latest
- Location: 8281
- Contact:
Re: SolarEdge in Latest Beta / Port Number
Hi,
Made some more testing, reinstalled the SE2200 again and within 5 minutes up and running in Domoticz, again changed to the SE3000 but no way to get contact.
After restart of the SE3000 once till now it was registrated but that's it. It seems that the latest SolarEdges have newer firmware, so this will be the difference.
Error: SolarEdge: Unknown Type: 1408
Error: SolarEdge: Something not handled correctly, having extra bytes!
All the data is forwarded to SolarEdge but only not registrated in Domoticz. So if I can help you developers with some data or trials please instruct me what to do.
Update :
System is sometimes registrating the data, early in the morning and late in the evening and allso when the power is very low on the panels, perhaps ythis info helps.
2015-04-24 11:06:30.072 Hardware Monitor: Fetching data (System sensors)
2015-04-24 11:07:00.099 Hardware Monitor: Fetching data (System sensors)
2015-04-24 11:07:30.128 Hardware Monitor: Fetching data (System sensors)
2015-04-24 11:07:44.787 (Solar) Energy (SolarMain)
2015-04-24 11:07:44.792 (Solar) Temp (SolarTemp)
2015-04-24 11:07:44.798 (Solar) General/Percentage (SolarHz)
2015-04-24 11:07:44.803 (Solar) General/Voltage (SolarAC)
2015-04-24 11:07:44.808 (Solar) General/Voltage (SolarDC)
2015-04-24 11:08:00.158 Hardware Monitor: Fetching data (System sensors)
2015-04-24 11:08:30.185 Hardware Monitor: Fetching data (System sensors)
2015-04-24 11:09:00.213 Hardware Monitor: Fetching data (System sensors)
Allso found system which is logging through RS485 SolarEdge => Sunprofit perhaps something for the developers to cooperate
Made some more testing, reinstalled the SE2200 again and within 5 minutes up and running in Domoticz, again changed to the SE3000 but no way to get contact.
After restart of the SE3000 once till now it was registrated but that's it. It seems that the latest SolarEdges have newer firmware, so this will be the difference.
Error: SolarEdge: Unknown Type: 1408
Error: SolarEdge: Something not handled correctly, having extra bytes!
All the data is forwarded to SolarEdge but only not registrated in Domoticz. So if I can help you developers with some data or trials please instruct me what to do.
Update :
System is sometimes registrating the data, early in the morning and late in the evening and allso when the power is very low on the panels, perhaps ythis info helps.
2015-04-24 11:06:30.072 Hardware Monitor: Fetching data (System sensors)
2015-04-24 11:07:00.099 Hardware Monitor: Fetching data (System sensors)
2015-04-24 11:07:30.128 Hardware Monitor: Fetching data (System sensors)
2015-04-24 11:07:44.787 (Solar) Energy (SolarMain)
2015-04-24 11:07:44.792 (Solar) Temp (SolarTemp)
2015-04-24 11:07:44.798 (Solar) General/Percentage (SolarHz)
2015-04-24 11:07:44.803 (Solar) General/Voltage (SolarAC)
2015-04-24 11:07:44.808 (Solar) General/Voltage (SolarDC)
2015-04-24 11:08:00.158 Hardware Monitor: Fetching data (System sensors)
2015-04-24 11:08:30.185 Hardware Monitor: Fetching data (System sensors)
2015-04-24 11:09:00.213 Hardware Monitor: Fetching data (System sensors)
Allso found system which is logging through RS485 SolarEdge => Sunprofit perhaps something for the developers to cooperate
Who is online
Users browsing this forum: No registered users and 1 guest