domoticz in synology as package! Available now.

Geoff332 · Post by **Geoff332** » Friday 06 March 2015 23:41

hi there,

I'm trying to get Domoticz running on my DS214+ DSM5.1-5022 Update 3. I've got a RazBerry controller on a Pi I'm trying to connect to.

I've installed SynoZWave and then the Domoticz package. Both installed correctly and run properly (thanks for all the work setting up the package too!)

When I try and add hardware I can see RazBerry Z-Wave via LAN Interface (HTTP) - and this connects.

But I can't see any OpenZwave options.

Have a missed something along the way? Is it better to use OpenZWave for this set-up?

Thanks,
Geoff.

tehnoinstyle · Post by **tehnoinstyle** » Saturday 07 March 2015 10:29

Geoff332 wrote:hi there,

I'm trying to get Domoticz running on my DS214+ DSM5.1-5022 Update 3. I've got a RazBerry controller on a Pi I'm trying to connect to.

I've installed SynoZWave and then the Domoticz package. Both installed correctly and run properly (thanks for all the work setting up the package too!)

When I try and add hardware I can see RazBerry Z-Wave via LAN Interface (HTTP) - and this connects.

But I can't see any OpenZwave options.

Have a missed something along the way? Is it better to use OpenZWave for this set-up?

Thanks,
Geoff.

Try to completely clean your web browser.

Geoff332 · Post by **Geoff332** » Saturday 07 March 2015 14:12

tehnoinstyle wrote:Try to completely clean your web browser.

Thanks.

I'm on Chrome. I did a cache clear and hard reload for the Domoticz domain - that's not fixed it.

I do have it working using HTTP - which does the job. I'm not sure if that's the best option.

tanebisse · Post by **tanebisse** » Tuesday 17 March 2015 9:54

I have the same problem as moonface.
I installed the Domoticz application on My Synology with the package automatically.
But I don't have any device type for my Aeon Lab Z stick on dropdownlist (see domoticz.jpg).
How can I install an Open Z wave pakage to recognize my device ?

mschut · Post by **mschut** » Friday 20 March 2015 22:31

Trying to upgrade manually, but it won't.

: Screenshot 2015-03-20 at 22.30.02.png (8.65 KiB) Viewed 4228 times

It should be a newer version, or not?

Eternity · Post by **Eternity** » Saturday 21 March 2015 11:45

@mschut

Decipher wrote:At some point the numbering of the SynoCommunity changed to more closely reflect that of the numbering in the Domoticz history file. The Syno sees 2.0.2276-6 to be an earlier version number than 2246-7.

I was not involved with this project at that time, it just is what it is. The simplest solution is to backup your Domoticz DB, uninstall and reinstall.

This helped me to sort out the version problems. I had to re-boot my Syno between reinstalls, otherwise it failed to install Domoticz!

mschut · Post by **mschut** » Saturday 21 March 2015 19:25

Thanks, I was hoping to prevent this scenario.

Eternity · Post by **Eternity** » Saturday 21 March 2015 19:50

mschut wrote:Thanks, I was hoping to prevent this scenario.

Well, at least I can confirm that it works. But yes, it does take about 5 minutes and 10 mouse clicks

mschut · Post by **mschut** » Monday 23 March 2015 15:30

I performed the upgrade by uninstalling and installing manually. The first thing my Synology said, was that I should upgrade the domoticz package. Guess what. It did the upgrade to the previous version.

Eternity · Post by **Eternity** » Monday 23 March 2015 16:01

Yes, that is what happens (if you don't read)...
A couple of post up on this page I quoted Decipher and his explanation of the new version numbering.

Your Syno thinks it can upgrade Domoticz, but downgrades. This is due to the altered history numbering. Hopefully this will get sorted out soon. In the meantime you could upgrade mnanually (backup and restore your database) and ignore the update message.

Solar · Post by **Solar** » Monday 23 March 2015 18:16

Is there a pakkage for syn 210+ as well.
Is the qoriq?

LouiS22 · Post by **LouiS22** » Friday 27 March 2015 14:18

FYI Synocommunity's database has been updated to .2284 - at least the cross compiler is updated to make 2284 versions.

thruhge · Post by **thruhge** » Saturday 28 March 2015 12:55

I don't get it, I'm trying to install domoticz from synocommunity, but it only shows this build:

v2.0.2112-5
Isn't this an old package?

When installed, I cant update.

ThinkPad · Post by **ThinkPad** » Saturday 04 April 2015 16:36

thruhge wrote:I don't get it, I'm trying to install domoticz from synocommunity, but it only shows this build:

v2.0.2112-5
Isn't this an old package?

When installed, I cant update.

Same question here, i am interested in the most actual version for the Synology that is available.
I installed the package from the SynoCommunity repo through package center a few months ago and updated it to 2284 (which i shouldn't have done i read somewhere).

https://synocommunity.com/package/domoticz also still shows 2.0.2112-5

Eternity · Post by **Eternity** » Saturday 04 April 2015 16:41

When I try to make Domoticz update itself, the log shows:

2015-04-04 16:38:43.482 Executing script: /usr/local/domoticz/scripts/update_domoticz
2015-04-04 16:38:59.180 Error: Error executing script command (/usr/local/domoticz/scripts/update_domoticz /usr/local/domoticz/). returned: 32512

The second line is RED.

How can I solve this?

ThinkPad · Post by **ThinkPad** » Friday 10 April 2015 14:02

Just installed domoticz_armada370-5.1_2.0.2362-6.spk from https://github.com/SynoCommunity/spksrc ... t-91066842 on my DS114 and so far seems to work fine.

jhsim · Post by **jhsim** » Saturday 11 April 2015 17:55

Also installed from github and 2.0.2362 is working here on a DS413 qoriq 5.1.

RFCXOM is fine, but having problems with USB permissions for a Z-Wave stick, the Domiticz log file includes this: Error, ERROR: Cannot open serial port /dev/ttyUSB1. Error code 13

I can just about find my way around with Telnet (although I'm not familiar with Linux), permissions are OK for the port with RFXCOM plugged in:
DiskStation> ls -l /dev/ttyUSB0
crwxrwxrwx 1 root root 188, 0 Apr 10 15:44 /dev/ttyUSB0

But not OK for the Z-Wave port:
DiskStation> ls -l /dev/ttyUSB1
crw------- 1 root root 188, 1 Apr 10 14:44 /dev/ttyUSB1

How can I change the permissions for /dev/ttyUSB1?

Doume · Post by **Doume** » Sunday 12 April 2015 12:44

chmod 777 /dev/ttyUSB1

jhsim · Post by **jhsim** » Sunday 12 April 2015 20:24

Apparently not

DiskStation> chmod 777 /dev/ttyUSB1
chmod: /dev/ttyUSB1: Operation not permitted

Doume · Post by **Doume** » Sunday 12 April 2015 20:48

You can only do that if your telnet session is 'root' itself....