Version: v2026.4
Platform: RaspberryPi 5 / Trixie
Plugin/Hardware: MQTT AD / IKEA Starkvind
Description:
After updating from 2026.3 to 2026.4 everything worked except the IKEA Starkvind airpurifier. When trying to change the Fan Mode in Domoticz trough the Selector Switch it now gives the following error in the log:
Error: MQTT AD: fan device unhandled mode_state_template (0x2c1165fffea62ad2_fan_zigbee2mqtt/0x2c1165fffea62ad2)
And control off the device is not posible. But all the info like air quality and pm2 value's are coming in. It's just not possible anymore to control the device.
When going to the Zigbee2MQTT page and i want to change the fan mode there it works and it changes the Fan Mode. Also the good fan modes are displayed on the Selector switch in Domoticz.
But when i want to change the fan mode trough Domoticz again, it gives the same error as above again.
This behavior was not present before the update to v2026.4, therefore i posted it here.
Is there a way to fix this?
MQTT Auto Discovery, fan device unhandled mode_state_template
Moderators: leecollings, remb0
Forum rules
Before posting here, make sure you are on the latest Beta or Stable version.
If you have problems related to the web gui, clear your browser cache + appcache first.
Use the following template when posting here:
Version: xxxx
Platform: xxxx
Plugin/Hardware: xxxx
Description:
.....
If you are having problems with scripts/blockly, always post the script (in a spoiler or code tag) or screenshots of your blockly
If you are replying, please do not quote images/code from the first post
Please mark your topic as Solved when the problem is solved.
Before posting here, make sure you are on the latest Beta or Stable version.
If you have problems related to the web gui, clear your browser cache + appcache first.
Use the following template when posting here:
Version: xxxx
Platform: xxxx
Plugin/Hardware: xxxx
Description:
.....
If you are having problems with scripts/blockly, always post the script (in a spoiler or code tag) or screenshots of your blockly
If you are replying, please do not quote images/code from the first post
Please mark your topic as Solved when the problem is solved.
- Didi
- Posts: 16
- Joined: Thursday 02 May 2019 21:14
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2026.4
- Location: Netherlands
- Contact:
MQTT Auto Discovery, fan device unhandled mode_state_template
Main: RPI-5 / Zigbee / Sonoff / RFLink433 / Camera's / Wifi / Custom Interface / Alarm / GPS / MQTT / MiLight