Python Plugin: WeHeat

[jorknu]

Hi,

Recently had a WeHeat Sparrow heatpump installed.
WeHeat is a Dutch manufacturer of heatpump with a data driven approach.
They have given to the community a HA integration and put on github a python client library:
https://github.com/wefabricate/wh-python

In an effort to learn some python I have decided to make a domoticz plugin out of the client library.

Source code can be found:
https://github.com/Tableflipper9001/weh ... icz-plugin

The following can be found from the Readme in github (most accurate):

• Installation instruction, highly advisable to use a python virtual environment

• Version history

• List of known problems / TODO's

This plugin has been tested with:
Domoticz 2025.1, 2025.2 - Raspberry pi 3B, RPI OS 12 with a WeHeat Sparrow P60 (Hybrid system, gas boiler via On/Off)
I have checked with a collegeau who has a Blackbird (P80), the parameter set looks the same, so no problems expected for the other heatpumps.

Looking for people to confirm that the plugin also works for:

• Blackbird P60 / P80 - All electric

• Blackbird P60 / P80 - Hybrid (On/Off or OT)

• Sparrow P60 - All electric

• Flint P40 - All electric

• Flint P40 - Hybrid (On/Off or OT)

Also searching for people that use Windows to check if the plugin functions.

Current capability of the plugin is:

• Temperature - Room temperature

• Temperature - Room temperature setpoint

• Temperature - Heating flow temperature

• Temperature - Heating flow temperature setpoint

• Temperature - Heatpump flow temperature

• Temperature - Heatpump return temperature

• Percentage - COP

• kWh - Electrical power

• kWh - Heat power

• kWh - Power from air

• Percentage - Compressor usage

• Text - Heatpump state

• Text - Cooling state

• Text - Heatpump error

For Hybrid systems:

• On/off switch - Gas boiler state

For All-Electric systems:

• On/off switch - Electric heater state

If there are things not working or you think it should be different let me know in the comments

Greetz,

Jordy

[waltervl]

Thanks!
I added it to the Plugin List on the wiki.

[niki_lauda]

Hi,

Recently had a WeHeat Sparrow heatpump installed.
WeHeat is a Dutch manufacturer of heatpump with a data driven approach.
They have given to the community a HA integration and put on github a python client library:
https://github.com/wefabricate/wh-python

In an effort to learn some python I have decided to make a domoticz plugin out of the client library.

Source code can be found:
https://github.com/Tableflipper9001/weh ... icz-plugin

The following can be found from the Readme in github (most accurate):

• Installation instruction, highly advisable to use a python virtual environment

• Version history

• List of known problems / TODO's

This plugin has been tested with:
Domoticz 2025.1, 2025.2 - Raspberry pi 3B, RPI OS 12 with a WeHeat Sparrow P60 (Hybrid system, gas boiler via On/Off)
I have checked with a collegeau who has a Blackbird (P80), the parameter set looks the same, so no problems expected for the other heatpumps.

Looking for people to confirm that the plugin also works for:

• Blackbird P60 / P80 - All electric

• Blackbird P60 / P80 - Hybrid (On/Off or OT)

• Sparrow P60 - All electric

• Flint P40 - All electric

• Flint P40 - Hybrid (On/Off or OT)

Also searching for people that use Windows to check if the plugin functions.

Current capability of the plugin is:

• Temperature - Room temperature

• Temperature - Room temperature setpoint

• Temperature - Heating flow temperature

• Temperature - Heating flow temperature setpoint

• Temperature - Heatpump flow temperature

• Temperature - Heatpump return temperature

• Percentage - COP

• kWh - Electrical power

• kWh - Heat power

• kWh - Power from air

• Percentage - Compressor usage

• Text - Heatpump state

• Text - Cooling state

• Text - Heatpump error

For Hybrid systems:

• On/off switch - Gas boiler state

For All-Electric systems:

• On/off switch - Electric heater state

If there are things not working or you think it should be different let me know in the comments

Greetz,

Jordy

Hi Jordy
Thanks for you plug-in
I have an problem reported in github
Can you answer it?
Thx for the efforts.

[jorknu]

For completion:
Apparantly I am not getting emails on my own repos in github .
We are picking this up via github.