Domoticz version 2024.7 released
Moderator: remb0
-
- Posts: 536
- Joined: Monday 20 March 2023 14:41
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: Somewhere in NL
- Contact:
Re: Domoticz version 2024.6 released
I agree with @jvdz and @janpep, but... (there is always a but)
It would have been nice if after the 2024.5 the little LOG_FORCE bug was found that there was a rollback to the point just before all the new FCM stuff was committed, the LOG_FORCE bug was solved and then a new 2024.6 was released.
And then again the new FCM stuff committed again in the beta.
But that is just my opinion.
It would have been nice if after the 2024.5 the little LOG_FORCE bug was found that there was a rollback to the point just before all the new FCM stuff was committed, the LOG_FORCE bug was solved and then a new 2024.6 was released.
And then again the new FCM stuff committed again in the beta.
But that is just my opinion.
Logic will get you from A to B. Imagination will take you everywhere.
-
- Posts: 153
- Joined: Wednesday 02 October 2019 7:37
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2024.4
- Location: Netherlands
- Contact:
Re: Domoticz version 2024.6 released
Feel free to join the testing team.
rpi4 - zigbee2mqtt - roborock - espeasy - rfxcom - homewizard p1 - otgw - homebridge - surveillance station - egardia - goodwe - open weather map - wol - BBQ detection - rsync backup
-
- Posts: 40
- Joined: Sunday 14 May 2023 19:23
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Domoticz version 2024.6 released
I am happy that features are added and bugs are killed.
Just updated on my RPi 4 (Bullseye) using Domoticz update option without any problems. Up and running 2024.7 in 25 seconds (mostly due to the auto-backup).
So: thank you.
Just updated on my RPi 4 (Bullseye) using Domoticz update option without any problems. Up and running 2024.7 in 25 seconds (mostly due to the auto-backup).
So: thank you.
- Marathon2010
- Posts: 27
- Joined: Tuesday 02 February 2021 23:02
- Target OS: NAS (Synology & others)
- Domoticz version: 2024.7
- Location: Netherlands
- Contact:
Re: Domoticz version 2024.6 released
Same with me, upgraded to 2024.7 without any issues. Thanks all for the good and hard work, appreciated.
Synology NAS DS920+ DSM7 (Docker) | Integrations: Audio, Heating, Gas, Electricity, Water, Alarm, Car, Camera, Doorbell, Garage | SW: Tasmota, DzVents, Pushbullet | Plugins: GPSLogger, BatteryLevel, Hyundai KIA
-
- Posts: 337
- Joined: Friday 17 August 2018 14:03
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Domoticz version 2024.6 released
Don’t understanding this complaint. I think it is very Nice that if bugs occur in a stable release that a new version is released.
-
- Posts: 212
- Joined: Thursday 14 March 2024 10:11
- Target OS: Linux
- Domoticz version: 2024.7
- Location: Netherlands
- Contact:
Re: Domoticz version 2024.6 released
Of course you have a good point. Again: I'm not complaining. I drew attention to the fact that it will be called a stable version very quickly and I asked when it will be called stable. Enough about this as far as I am concerned.
Domoticz in Ubuntu virtual machine on Synology DS718+ behind FRITZ!Box.
Using: EvoHome; MELCloud; P1 meter; Z-Stick GEN5; Z-Wave-js-ui; MQTT; Greenwave powernodes 1+6; Fibaro switch, plugs, smoke; FRITZ!DECT 200. Scripts listed in profile interests.
Using: EvoHome; MELCloud; P1 meter; Z-Stick GEN5; Z-Wave-js-ui; MQTT; Greenwave powernodes 1+6; Fibaro switch, plugs, smoke; FRITZ!DECT 200. Scripts listed in profile interests.
-
- Posts: 2
- Joined: Wednesday 30 December 2020 22:00
- Target OS: Linux
- Domoticz version: 2024.7
- Contact:
Re: Domoticz version 2024.6 released
Thanks for the update, really love the energy dasboard !
-
- Posts: 625
- Joined: Thursday 02 October 2014 6:36
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2022.2
- Location: Geleen
- Contact:
Re: Domoticz version 2024.7 released
Upgrade from 2022.2 (Buster) to 2024.7(Bullseye) completed. Took really some preparation, but mainly because of postponing from my site it took over half a year. Just some issues with usb sticks and me not thinking took extra time this morning. Almost everyting in docker containers.
Running Domoticz happily for almost a decade.
Just added my Niro and Solaredge battery stuff, looks great. Just have to wait for my smart meter to start playing with the Energy Dashboard.
Keep up the good work.
Running Domoticz happily for almost a decade.
Just added my Niro and Solaredge battery stuff, looks great. Just have to wait for my smart meter to start playing with the Energy Dashboard.
Keep up the good work.
-
- Posts: 616
- Joined: Thursday 10 November 2016 9:30
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Domoticz version 2024.7 released
Upgraded from 2024.4 to 2024.7 yesterday, all went smooth... Mostly using zwave (still OZW as I do not add anything new on this side now) & Zigbee using Z4D + a few services of my own aside Domoticz using HTTP/JSON API, hosted by a PI3B.
Thanks to all that contributed to this new release!
Thanks to all that contributed to this new release!
Re: Domoticz version 2024.7 released
It works perfectly. The energy dashboard is a great addition. Keep up the good work.
Domoticz latest stable, Intel NUC, Proxmox, Zigate, RFLink, Kaku switches, Ikea lights, Xiaomi sensors, Honeywell smoke detectors, Yeelight, Shelly, Slave Domoticz PI 3B+, Node-Red, Espeasy.
-
- Posts: 8
- Joined: Sunday 04 February 2024 21:19
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2024.4
- Location: VA. USA
- Contact:
Re: Domoticz version 2024.7 released
Any support for a pi5 yet it requires bookworm.
- waltervl
- Posts: 5148
- Joined: Monday 28 January 2019 18:48
- Target OS: Linux
- Domoticz version: 2024.7
- Location: NL
- Contact:
Re: Domoticz version 2024.7 released
There are lots of users that succesful installed Domoticz on bookworm. There are also some with issues (with libssl1). Surch the forum for examples.
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
- FireWizard
- Posts: 1745
- Joined: Tuesday 25 December 2018 12:11
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: Voorthuizen (NL)
- Contact:
Re: Domoticz version 2024.7 released
Hi,
@waltervl wrote:
After installation of Rasberry Pi OS "Bookworm" install 2 packages:
and
That did the trick for me.
Running Domoticz 2024.7, together with Node-RED 4.0.2 and Mosquitto, on a Rasberry Pi 1B+, with Bookworm, installed!!!
Regards
@waltervl wrote:
I wouldn't call this an issue.There are also some with issues (with libssl1). Surch the forum for examples.
After installation of Rasberry Pi OS "Bookworm" install 2 packages:
Code: Select all
sudo apt install libssl1.1
Code: Select all
sudo apt install libusb-dev
Running Domoticz 2024.7, together with Node-RED 4.0.2 and Mosquitto, on a Rasberry Pi 1B+, with Bookworm, installed!!!
Regards
-
- Posts: 8
- Joined: Sunday 04 February 2024 21:19
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2024.4
- Location: VA. USA
- Contact:
Re: Domoticz version 2024.7 released
the Pi5 needs different core Linux image which are only available in the Official PiOS Bookworm. Domoticz will not start on a pi5 with the Official PiOS Bookworm image. Is anyone running Domoticz on a RPI 5 with pios bookworm? and if so how?
- waltervl
- Posts: 5148
- Joined: Monday 28 January 2019 18:48
- Target OS: Linux
- Domoticz version: 2024.7
- Location: NL
- Contact:
Re: Domoticz version 2024.7 released
See the message of Fire wizard before yours...
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
-
- Posts: 153
- Joined: Wednesday 02 October 2019 7:37
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2024.4
- Location: Netherlands
- Contact:
Re: Domoticz version 2024.7 released
Updated from 2024.4 using web-button, worked without any problems.
rpi4 - zigbee2mqtt - roborock - espeasy - rfxcom - homewizard p1 - otgw - homebridge - surveillance station - egardia - goodwe - open weather map - wol - BBQ detection - rsync backup
-
- Posts: 83
- Joined: Monday 14 November 2022 12:46
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2023.1
- Location: Poland
- Contact:
Re: Domoticz version 2024.7 released
How to turn on or where is the energy panel located?
Unfortunately, the machinon theme does not support the energy panel.
Unfortunately, the machinon theme does not support the energy panel.
- waltervl
- Posts: 5148
- Joined: Monday 28 January 2019 18:48
- Target OS: Linux
- Domoticz version: 2024.7
- Location: NL
- Contact:
Re: Domoticz version 2024.7 released
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
- Domoberry
- Posts: 116
- Joined: Tuesday 30 May 2017 19:00
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2024.7
- Contact:
Re: Domoticz version 2024.7 released
On Bullseye (updated/upgraded) with Zwave-JS on RPI4, I updated Domoticz from 2024.4 to 2024.7.
Update was a breeze and with a browser cache clear Domoticz was up and running again.
Thanks team!!
See https://www.domoticz.com/forum/viewtopi ... =6&t=42580 for a question on Custom Icons.
Update was a breeze and with a browser cache clear Domoticz was up and running again.
Thanks team!!
See https://www.domoticz.com/forum/viewtopi ... =6&t=42580 for a question on Custom Icons.
- gizmocuz
- Posts: 2350
- Joined: Thursday 11 July 2013 18:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: Top of the world
- Contact:
Re: Domoticz version 2024.7 released
Did you had to do a browser cache clean? That should not be necessary since quite some timeDomoberry wrote: ↑Thursday 08 August 2024 10:42 On Bullseye (updated/upgraded) with Zwave-JS on RPI4, I updated Domoticz from 2024.4 to 2024.7.
Update was a breeze and with a browser cache clear Domoticz was up and running again.
Thanks team!!
See https://www.domoticz.com/forum/viewtopi ... =6&t=42580 for a question on Custom Icons.
Quality outlives Quantity!
Who is online
Users browsing this forum: No registered users and 0 guests