P1 device not in Utility tab on master domoticz

Moderator: leecollings

Post Reply
ronalddevos
Posts: 7
Joined: Thursday 30 March 2017 16:13
Target OS: Windows
Domoticz version:
Contact:

P1 device not in Utility tab on master domoticz

Post by ronalddevos »

I have a Pi3B+ newly set up (as the old zero was no longer supported by domoticz) connected to a P1 Meter and connected as slave to the master domoticz (running on Windows). All P1 device show up on the Pi3B=+ (in "devices" and "utilities") and are showing up in "devices" on the master domoticz. However, none of the devices show up on the "utilities" tab on the master domoticz. This used to work OK with the old version on the zero (do not know the version).
Both slave and master running domoticz 2024.4 . Did all the usual stuff (allow new device, refresh, reboot, update, etc etc.)
Does anyone have any suggestions?
Rgds, R
User avatar
gizmocuz
Posts: 2394
Joined: Thursday 11 July 2013 18:59
Target OS: Raspberry Pi / ODroid
Domoticz version: beta
Location: Top of the world
Contact:

Re: P1 device not in Utility tab on master domoticz

Post by gizmocuz »

Okey, to recap, they show up under 'devices' in the master Domoticz, so communication between the two is working.
It's not showing up under 'Utilities'

Two things to check:
- From the devices tab, you have added them to the system? (arrow should be blue)
- If above is true, goto Settings->Users, did you specify any devices for the user you are logging in with? If yes, did you also add the P1 meter?
Quality outlives Quantity!
ronalddevos
Posts: 7
Joined: Thursday 30 March 2017 16:13
Target OS: Windows
Domoticz version:
Contact:

Re: P1 device not in Utility tab on master domoticz

Post by ronalddevos »

- From the devices tab, you have added them to the system? (arrow should be blue) - Yes
- Users, did you specify any devices for the user you are logging in with? If yes, did you also add the P1 meter? - No, but I did now and they are there!
Thanks!
User avatar
gizmocuz
Posts: 2394
Joined: Thursday 11 July 2013 18:59
Target OS: Raspberry Pi / ODroid
Domoticz version: beta
Location: Top of the world
Contact:

Re: P1 device not in Utility tab on master domoticz

Post by gizmocuz »

@ronalddevos , if you did not specify any devices for this user, it should see all devices.
So, I can assume you did specify 'some' devices before?
If not, could you replicate the issue by creating another user, what user-rights did you assign to the user?
Quality outlives Quantity!
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest