homebridge-edomoticz Plugin

[loteran]

Hello everyone,

I've got a problem with edomoticz when I update to V2 1 45-46 or 47.

Homebridge can't load my accessoires, but if I go back to V2 1 40 everything work

With v2 1 45+

Code: Select all

[14/11/2023, 19:03:24] Homebridge v1.5.0 (HAP v0.10.2) (Homebridge DCF1) is running on port 51726.
[14/11/2023, 19:03:25] Télé 4EF7 is running on port 32991.
[14/11/2023, 19:03:25] Please add [Télé 4EF7] manually in Home app. Setup Code: 577-00-900
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp All. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp Bridge. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp Couloir. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp Cuisine. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp SDB. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp Salon. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] There was an error while getting the MQTT Hardware Device from Domoticz.
Please verify that you have added the MQTT Hardware Device and that the hardware device is enabled.
[14/11/2023, 19:03:26] [Google Smart Home] Connected (1) - wss://homebridge-gsh.iot.oz.nu
[14/11/2023, 19:03:50] [Google Smart Home] Finished instance discovery
[14/11/2023, 19:04:05] [Google Smart Home] Sending Sync Request
[14/11/2023, 19:04:05] [Google Smart Home] Received SYNC intent

Any ideas why it's happend ??? I change nothing, just update and when i go back to v2 40 everything work again I can see my accessories.

Something strange, in v40 I see my accessories, edmoticz can see them and I can switch on or off, but in my logs i got this :

Code: Select all

[Domoticz] Device: éteins tout (1798)
[14/11/2023, 19:04:38] [Domoticz] External Device: LG TV - Status (1193)
[14/11/2023, 19:04:38] LG TV - Status BC65 is running on port 33579.
[14/11/2023, 19:04:38] Please add [LG TV - Status BC65] manually in Home app. Setup Code: 577-00-900
[14/11/2023, 19:04:38] [Domoticz] There was an error while getting the MQTT Hardware Device from Domoticz.
Please verify that you have added the MQTT Hardware Device and that the hardware device is enabled.
[14/11/2023, 19:04:39] [Google Smart Home] Connected (1) - wss://homebridge-gsh.iot.oz.nu
[14/11/2023, 19:05:02] [Google Smart Home] Finished instance discovery
[14/11/2023, 19:05:17] [Google Smart Home] Sending Sync Request
[14/11/2023, 19:05:17] [Google Smart Home] Received SYNC intent
[14/11/2023, 19:05:23] [Google Smart Home] Received QUERY intent

[Egregius]

I have some other strange thing now...
Because I moved my Homepod mini to the bathroom I wanted it to start playing music as soon as I turn on the light from the bathroom.
That's when I noticed that the status of the light isn't updated in homebridge/homekit anymore.

When I send a switch command in domoticz homebridge and homekit don't see this until I refresh the homebridge ui accessoires page.
When I send the command from within the home app all is instantly up-to-date.
Tried returning to previous versions from homebridge and from edomoticz plugin but none works.

I also tried with 2 browser windows open. Refreshing one of them results in both being up-to-date. Strange thing...

Any ideas?

[Nautilus]

Hello everyone,

I've got a problem with edomoticz when I update to V2 1 45-46 or 47.

Homebridge can't load my accessoires, but if I go back to V2 1 40 everything work

With v2 1 45+

Code: Select all

[14/11/2023, 19:03:24] Homebridge v1.5.0 (HAP v0.10.2) (Homebridge DCF1) is running on port 51726.
[14/11/2023, 19:03:25] Télé 4EF7 is running on port 32991.
[14/11/2023, 19:03:25] Please add [Télé 4EF7] manually in Home app. Setup Code: 577-00-900
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp All. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp Bridge. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp Couloir. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp Cuisine. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp SDB. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp Salon. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] There was an error while getting the MQTT Hardware Device from Domoticz.
Please verify that you have added the MQTT Hardware Device and that the hardware device is enabled.
[14/11/2023, 19:03:26] [Google Smart Home] Connected (1) - wss://homebridge-gsh.iot.oz.nu
[14/11/2023, 19:03:50] [Google Smart Home] Finished instance discovery
[14/11/2023, 19:04:05] [Google Smart Home] Sending Sync Request
[14/11/2023, 19:04:05] [Google Smart Home] Received SYNC intent

Any ideas why it's happend ??? I change nothing, just update and when i go back to v2 40 everything work again I can see my accessories.

Something strange, in v40 I see my accessories, edmoticz can see them and I can switch on or off, but in my logs i got this :

Code: Select all

[Domoticz] Device: éteins tout (1798)
[14/11/2023, 19:04:38] [Domoticz] External Device: LG TV - Status (1193)
[14/11/2023, 19:04:38] LG TV - Status BC65 is running on port 33579.
[14/11/2023, 19:04:38] Please add [LG TV - Status BC65] manually in Home app. Setup Code: 577-00-900
[14/11/2023, 19:04:38] [Domoticz] There was an error while getting the MQTT Hardware Device from Domoticz.
Please verify that you have added the MQTT Hardware Device and that the hardware device is enabled.
[14/11/2023, 19:04:39] [Google Smart Home] Connected (1) - wss://homebridge-gsh.iot.oz.nu
[14/11/2023, 19:05:02] [Google Smart Home] Finished instance discovery
[14/11/2023, 19:05:17] [Google Smart Home] Sending Sync Request
[14/11/2023, 19:05:17] [Google Smart Home] Received SYNC intent
[14/11/2023, 19:05:23] [Google Smart Home] Received QUERY intent

I think the api calls were updated in the latest release to reflect what Domoticz is using. Is your Domoticz up to date?

[tjabas]

since i updated domoticz i keep getting these error messages, and i have traced it back to the edomoticz plugin in homebridge, is there a way to get rid of the errors?

2024-01-12 22:12:53.026 [WebServer] Deprecated RType (devices) for API request. Handled via fallback (getdevices), please use correct API Command! (192.168.1.57)

[waltervl]

Did you update he plugin already?

[akamming]

Hello everyone,

I've got a problem with edomoticz when I update to V2 1 45-46 or 47.

Homebridge can't load my accessoires, but if I go back to V2 1 40 everything work

With v2 1 45+

Code: Select all

[14/11/2023, 19:03:24] Homebridge v1.5.0 (HAP v0.10.2) (Homebridge DCF1) is running on port 51726.
[14/11/2023, 19:03:25] Télé 4EF7 is running on port 32991.
[14/11/2023, 19:03:25] Please add [Télé 4EF7] manually in Home app. Setup Code: 577-00-900
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp All. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp Bridge. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp Couloir. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp Cuisine. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp SDB. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] Could not fetch data for AppLamp Salon. (Device might have been removed?)
[14/11/2023, 19:03:25] [Domoticz] There was an error while getting the MQTT Hardware Device from Domoticz.
Please verify that you have added the MQTT Hardware Device and that the hardware device is enabled.
[14/11/2023, 19:03:26] [Google Smart Home] Connected (1) - wss://homebridge-gsh.iot.oz.nu
[14/11/2023, 19:03:50] [Google Smart Home] Finished instance discovery
[14/11/2023, 19:04:05] [Google Smart Home] Sending Sync Request
[14/11/2023, 19:04:05] [Google Smart Home] Received SYNC intent

Any ideas why it's happend ??? I change nothing, just update and when i go back to v2 40 everything work again I can see my accessories.

Something strange, in v40 I see my accessories, edmoticz can see them and I can switch on or off, but in my logs i got this :

Code: Select all

[Domoticz] Device: éteins tout (1798)
[14/11/2023, 19:04:38] [Domoticz] External Device: LG TV - Status (1193)
[14/11/2023, 19:04:38] LG TV - Status BC65 is running on port 33579.
[14/11/2023, 19:04:38] Please add [LG TV - Status BC65] manually in Home app. Setup Code: 577-00-900
[14/11/2023, 19:04:38] [Domoticz] There was an error while getting the MQTT Hardware Device from Domoticz.
Please verify that you have added the MQTT Hardware Device and that the hardware device is enabled.
[14/11/2023, 19:04:39] [Google Smart Home] Connected (1) - wss://homebridge-gsh.iot.oz.nu
[14/11/2023, 19:05:02] [Google Smart Home] Finished instance discovery
[14/11/2023, 19:05:17] [Google Smart Home] Sending Sync Request
[14/11/2023, 19:05:17] [Google Smart Home] Received SYNC intent
[14/11/2023, 19:05:23] [Google Smart Home] Received QUERY intent

I see you are on homebridge 1.5 which itself is already on 1.7

i don't know if it fixes your problem. But never a good idea to be on old versions, cause very likely the developers will not test to old versions.

In my setup all works fine and i'm on the latest versions of all products:
- Homebridge 1.7
- Domoticz 2024.1
- Edomoticz 2.1.47

[madpatrick]

Hi,

I'm trying the homebridge-edomoticz Plugin with homebridge and i noticed that my thermostats were not added.
After a search i've found out that is worling with domtoicz 2023.2, but not with 2024.x

Is somebody experiencing the same problems or does somebody has a solution for this?

- Debian 11
- Homebridge 1.7
- Domoticz 2024.4
- Edomoticz 2.1.47

Code: Select all

[11-2-2024 15:28:50] Homebridge v1.7.0 (HAP v0.11.1) (Homebridge E72C) is running on port 51012.
[11-2-2024 15:28:50] [Domoticz] Device: Toon Thermostaat (255)
[11-2-2024 15:28:50] [Domoticz] Device: Wnk - Erker (69)
[11-2-2024 15:28:50] [Domoticz] Device: Wnk - Keukenzijde (59)
[11-2-2024 15:28:50] [Domoticz] Device: Wnk - Openhaard (276)
[11-2-2024 15:28:50] [Domoticz] Device: Wnk - Studeerkamer (355)
[11-2-2024 15:28:50] [Domoticz] Device: Wnk - TV (455)
[11-2-2024 15:28:50] [Domoticz] Device: Wnk - Tuinzijde (64)

[akamming]

Hi,

I'm trying the homebridge-edomoticz Plugin with homebridge and i noticed that my thermostats were not added.
After a search i've found out that is worling with domtoicz 2023.2, but not with 2024.x

Is somebody experiencing the same problems or does somebody has a solution for this?

- Debian 11
- Homebridge 1.7
- Domoticz 2024.4
- Edomoticz 2.1.47

Code: Select all

[11-2-2024 15:28:50] Homebridge v1.7.0 (HAP v0.11.1) (Homebridge E72C) is running on port 51012.
[11-2-2024 15:28:50] [Domoticz] Device: Toon Thermostaat (255)
[11-2-2024 15:28:50] [Domoticz] Device: Wnk - Erker (69)
[11-2-2024 15:28:50] [Domoticz] Device: Wnk - Keukenzijde (59)
[11-2-2024 15:28:50] [Domoticz] Device: Wnk - Openhaard (276)
[11-2-2024 15:28:50] [Domoticz] Device: Wnk - Studeerkamer (355)
[11-2-2024 15:28:50] [Domoticz] Device: Wnk - TV (455)
[11-2-2024 15:28:50] [Domoticz] Device: Wnk - Tuinzijde (64)

I also use domoticz and homebridge/edomoticz. Thermostat support is edomoticz is very limited: you can Only set the setpoint, where in HomeKit the device can also set heating mode, check current temp, etc… domoticz splits this functionality in 4 devices and that’s why edomoticz. Cannot convert

So I Made my own homebridge plug-in for domoticz thermostats: https://github.com/akamming/homebridge ... thermostat

I suggest you use this one. This also works around your issue and you have a better HomeKit experience

[madpatrick]

Thanks.
Nice add on for Homebridge.
I've also found a Toon plugin for Homebrdige. SInce i've a Toon Thermostat this works better.

Never the less since Domtoicz 2024.x the thermostats are not working any more with Edomoticz.
So the problem lays with a change of Domoticz or Edomoticz needs an update, because i believe there was change in Domotivz for thermostats

[akamming]

Never the less since Domtoicz 2024.x the thermostats are not working any more with Edomoticz.
So the problem lays with a change of Domoticz or Edomoticz needs an update, because i believe there was change in Domotivz for thermostats

best is to log an issue on the github page of edomoticz then i would say

[madpatrick]

Never the less since Domtoicz 2024.x the thermostats are not working any more with Edomoticz.
So the problem lays with a change of Domoticz or Edomoticz needs an update, because i believe there was change in Domotivz for thermostats

best is to log an issue on the github page of edomoticz then i would say

Already done

https://github.com/PatchworkBoy/homebri ... issues/279

[Marci]

I also use domoticz and homebridge/edomoticz. Thermostat support is edomoticz is very limited: you can Only set the setpoint, where in HomeKit the device can also set heating mode, check current temp, etc… domoticz splits this functionality in 4 devices and that’s why edomoticz. Cannot convert

So I Made my own homebridge plug-in for domoticz thermostats: https://github.com/akamming/homebridge ... thermostat

I suggest you use this one. This also works around your issue and you have a better HomeKit experience

Alternative is to use homebridge-web-thermostat and NodeRed to knock up a flow that creates the required web endpoints that talk to the required virtual domoticz devices (3x setpoints: Heating, Cooling & Target) & monitors domoticz/in & out MQTT - S'how I've been running thermostats in homebridge for _years_

[Marci]

Already done

https://github.com/PatchworkBoy/homebri ... issues/279

Everything merged and published to NPM as v2.1.49 - with a tweak to maintain compatibility with BOTH 2023.x and 2024.x

[madpatrick]

Already done

https://github.com/PatchworkBoy/homebri ... issues/279

Everything merged and published to NPM as v2.1.49 - with a tweak to maintain compatibility with BOTH 2023.x and 2024.x

Many thanks.

Are there plans to make Groups available ?

[Marci]

What do you mean by “groups”?

[madpatrick]

What do you mean by “groups”?

In Domoticz you have groups and scenes
In a group you multiple devices (switches) you can switch on/off with one click