Question about DIAL

[abone]

Hi,

I'm trying to setup a Dial and I have a question:


_{blocks['Energy'] = {
idx: '26181',
title: 'Conso',
type: 'dial',
value: 'Usage',
};}


It reports the right number as 'kwh' instead of 'wh'
Even If I use:

unit: 'wh',

It still reports in 'kwh'.

If I dig in </> show data, I get :

_{"Usage": "216,909 Watt",}


(I had to put a coma because the forum complain but it is a dot)

Thanks for your help !

[Lokonli]

Hi,

I'm trying to setup a Dial and I have a question:


_{blocks['Energy'] = {
idx: '26181',
title: 'Conso',
type: 'dial',
value: 'Usage',
};}


It reports the right number as 'kwh' instead of 'wh'
Even If I use:

unit: 'wh',

It still reports in 'kwh'.

If I dig in </> show data, I get :

_{"Usage": "216,909 Watt",}


(I had to put a coma because the forum complain but it is a dot)

Thanks for your help !

What kind of Domoticz device type are you using?

[abone]

Hi,

Thanks for asking. It's the 'Aeon Lab Home Energy Meter ZW095'.

cheers

[abone]

Sorry I have corrected, I initialy wrote Aeotec instead of Aeon Lab

So it is the Aeon Lab Home Energy Meter (ZW095).

[Lokonli]

Sorry I have corrected, I initialy wrote Aeotec instead of Aeon Lab

So it is the Aeon Lab Home Energy Meter (ZW095).

In Domoticz this probably is an energy device. To be sure, can you post the output of:

Code: Select all

http://domoticz:8080/json.htm?type=devices&rid=26181

For Energy devices normally the field 'Usage' gives the actual power usage (in W). The total energy usage is provided via 'CounterToday' (in kWh)

Energy devices are handled in a specific way. Not all configuration parameters are used. Normally an Energy dial will display the daily counter as the big number (in kWh) and the actual usage (in W) as a small number below. You can switch this by adding the following as block parameter:

Code: Select all

   subtype: 'usage'

Example:

energydials2.jpg (22.87 KiB) Viewed 371 times

If you want to customize your dial, you can do it as follows:

Code: Select all

blocks['Energy'] = {
    idx: 26181,
    type: 'dial',
    title: 'Conso',
    showvalue: false,
    values : [
        {
            value: 'Usage',
            unit: 'W',
            addClass: 'primary'
        },
        {
            value: 'CounterToday',
            unit: 'kWh'
        },

    ],
}