I have successfully setup the CAM with AgentDVR. The connect URL is: rtsp://192.168.11.39:554/cam1/mpeg4.
In domoticz I have tried this
without success. I also played unsuccessfully around with different variations.
Any hints how to proceed?
Thanks
Günter
setup for ANPVIZ IPC-D353WD-S
Moderator: leecollings
-
- Posts: 23
- Joined: Wednesday 27 October 2021 18:13
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2023.2
- Location: Aachen, Germany
- Contact:
setup for ANPVIZ IPC-D353WD-S
Raspberry Pi 3B+
Raspbian GNU/Linux 12 (bookworm) / 6.1.61-v7+
Version: 2023.2
Build Hash: 19efd039c
Compile Date: 2023-07-21 17:23:44
dzVents Version: 3.1.8
Python Version: 3.11.2 (main, Mar 13 2023, 12:18:29) [GCC 12.2.0]
Raspbian GNU/Linux 12 (bookworm) / 6.1.61-v7+
Version: 2023.2
Build Hash: 19efd039c
Compile Date: 2023-07-21 17:23:44
dzVents Version: 3.1.8
Python Version: 3.11.2 (main, Mar 13 2023, 12:18:29) [GCC 12.2.0]
- waltervl
- Posts: 5148
- Joined: Monday 28 January 2019 18:48
- Target OS: Linux
- Domoticz version: 2024.7
- Location: NL
- Contact:
Re: setup for ANPVIZ IPC-D353WD-S
Best is to check if your camera supports a snapshot mode as that is supported in the image URL. eg http://192.168.11.39/cam1/snapshot (fake URL!)
In this wiki page you have some examples: https://www.domoticz.com/wiki/Camera_Setup
Edit: check grab.jpg?oid=1 and command.cgi?oid=1&ot=2&cmd=snapshot from https://www.ispyconnect.com/userguide-agent-api.aspx
In this wiki page you have some examples: https://www.domoticz.com/wiki/Camera_Setup
Edit: check grab.jpg?oid=1 and command.cgi?oid=1&ot=2&cmd=snapshot from https://www.ispyconnect.com/userguide-agent-api.aspx
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Who is online
Users browsing this forum: No registered users and 0 guests