Domoticz installation in Linux stuck on 'welcome' dialog

[stig]

I am trying to install Domoticz through SSH (using Putty) and when the installation 'welcome' dialog is shown (see attachment) it seems that it is not possible to press the 'OK' button.

I tried pressing the following input methods:

• Tab: many times, no response
• Enter: after many presses, it results in black lines being added at the bottom
• Mouse: no response

None of the attempts above result in being able to select or press the 'ok' button. Only by pressing Ctrl+C I'm able to exit the dialog.

Since my first suspect was that it might be related to Putty, I tried other methods to connect through SSH (cygwin, and Ubutu WSL); they all show the same behaviour. In addition, I tried it directly on the PC by connecting a keyboard and monitor (instead of using SSH) and it also shows the same behaviour.

• Linux version: Ubuntu-Server 22.04 LTS (Minimal)
  • Distribution: Ubuntu 22.04 LTS
  • Kernel: Linux 5.15.0-25-generic x86_64
• Domoticz version: 2022.1.14127
• Domoticz installation method: by running 'curl -sSL install.domoticz.com | sudo bash'
• PC: Advantech ARK-3360

Anyone an idea of what this could be? Am I missing packages needed to support a shell GUI? Could it be related to the Ubuntu-Server 22.04 Minimal installation?

2022-04-24 22_54_02-.png (14.29 KiB) Viewed 3077 times

[stig]

Instead of using the pre-compiled version, I build Domoticz from source, now it's working. So, I think there was an error at the background which was not displayed on the terminal.

[Gianni]

+1

thx allmost dumping my laptop to the bin.
Hitting all posible buttons but cannot enter OK on 22.04
now try the build my own version

[Gianni]

Building from source give me make errors.
So i rebuild my os on 20.04 and now the automatic installer works 2.
is this possible to update the installer?

thx

[kiddigital]

This might be related to Ubuntu 22.04 coming with OpenSSL3 instead of the older OpenSLL 1.1.

The precompiled versions (till now) might not function with OpenSSL 3 (yet).

See github issue #5233

[desliem]

Same problem here with Armbian 22.08.0 Jimmy (ie Ubuntu 22.04.1 LTS) on an Arm 64-bit cpu. Dowloading the script and then executing it is a way around this problem:

Code: Select all

$ curl -L install.domoticz.com > install.sh
$ chmod +x install.sh
$ sudo ./install.sh

However Domoticz will not run because of the missing library.

Code: Select all

$ systemctl status domoticz

---

● domoticz.service - LSB: Home Automation System
Loaded: loaded (/etc/init.d/armbianticz.sh; generated)
Active: active (exited) since Sun 2022-08-07 15:36:19 ADT; 5min ago
Docs: man:systemd-sysv-generator(8)
Process: 2219 ExecStart=/etc/init.d/domoticz.sh start (code=exited, status=0/SUCCESS)
CPU: 42ms

Aug 07 15:36:19 armbian systemd[1]: Starting LSB: Home Automation System...
Aug 07 15:36:19 armbian domoticz.sh[2225]: /home/me/domoticz/domoticz: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory
Aug 07 15:36:19 armbian systemd[1]: Started LSB: Home Automation System.

---

Here is a temporary solution until openssl3 makes it to the stable release (reference) if this advice is deemed important

Use a stable release in Production environments (eq the one your wife uses or contains data you want to keep) :

Code: Select all

$ wget http://ports.ubuntu.com/pool/main/o/openssl/libssl1.1_1.1.1f-1ubuntu2_arm64.deb
$ sudo dpkg -i libssl1.1_1.1.1f-1ubuntu2_arm64.deb

If a 64 bit Intel/AMD OS Linux distribution is used get the library from here
http://archive.ubuntu.com/ubuntu/pool/m ... _amd64.deb

Got these links to the 64-bit deb packages from https://pkgs.org.

Don't know about 32 bit Arm, maybe http://http.us.debian.org/debian/pool/m ... _armhf.deb ?
That link was found on https://packages.debian.org/sid/armhf/l ... 1/download

Unfortunately, installing the libssl1.1 library ahead of invoking the Domoticz install script did not solve the problem of the frozen screen.

[Arnoduino]

[tab] to select and [space] to confirm works for me on RPI 4 via VNC