Dashticz v3.7.5 beta

[Lokonli]

A new beta release with as main change: Open Weather Map widgets.

Whilte updating the current OWM module I noticed that OWM provides several widgets as well. I thought let's try to merge those first.

owmwidget.jpg (30.3 KiB) Viewed 1114 times

Code: Select all

blocks['mywidget'] = {
   type: 'owmwidget',
   layout: 11,
   apikey: '123abc...',
   city: 'amsterdam',
   country: 'nl'
}

The widgets automatically scales to the column width.

Only the English language is supported.

In total 24 different widgets are available. See:
https://dashticz.readthedocs.io/en/beta ... idget.html

[RuudP1987]

This looked nice to mee so I did git pull to update. All good.

Added to my config.js

Code: Select all

//owm config widget
blocks['mywidget'] = {
type: 'owmwidget',  //to select a owm widget
layout: 11, //1 .. 24
width: 12,
}

And after that I added it to my 2nd column. But nothing shows up Currentweather shows up and after that buienradar is showing. Not the graph from OWM.

Code: Select all

columns[2] = {
  blocks: ['sunrise','currentweather_big_owm','mywidget','buienradar'],
  width: 4,
}

[Lokonli]

'currentweather_big_owm' is working you wrote, so your OWM config settings must be ok ...

Can you open DevTools (F12), and post the errors that are reported on the console tab? (I guess there will be something ...)

[madpatrick]

Working !!

Is it possible the limt the amout of days ? 8 days is to much data for my width and makes the widget very small (not readable)
and change the colors ? Like a black background instead of white

[RuudP1987]

'currentweather_big_owm' is working you wrote, so your OWM config settings must be ok ...

Can you open DevTools (F12), and post the errors that are reported on the console tab? (I guess there will be something ...)

Code: Select all

XML-parsefout: ongedefinieerde entiteit
Locatie: http://192.168.1.2:8082/tpl/news_modal.tpl
Regelnummer 5, kolom 93: news_modal.tpl:5:93
XML-parsefout: onjuist gevormd
Locatie: http://192.168.1.2:8082/tpl/garbage_1.tpl
Regelnummer 3, kolom 35: garbage_1.tpl:3:35
XML-parsefout: troep na documentelement
Locatie: http://192.168.1.2:8082/tpl/graph_tooltip.tpl
Regelnummer 16, kolom 1:

[Lokonli]

'currentweather_big_owm' is working you wrote, so your OWM config settings must be ok ...

Can you open DevTools (F12), and post the errors that are reported on the console tab? (I guess there will be something ...)

Code: Select all

XML-parsefout: ongedefinieerde entiteit
Locatie: http://192.168.1.2:8082/tpl/news_modal.tpl
Regelnummer 5, kolom 93: news_modal.tpl:5:93
XML-parsefout: onjuist gevormd
Locatie: http://192.168.1.2:8082/tpl/garbage_1.tpl
Regelnummer 3, kolom 35: garbage_1.tpl:3:35
XML-parsefout: troep na documentelement
Locatie: http://192.168.1.2:8082/tpl/graph_tooltip.tpl
Regelnummer 16, kolom 1:

There seems to be something wrong with loading the template files (*.tpl) on your system.
What kind of system do you have? Which http server do you use for Dashticz?

But this should not be caused by the new OWM widgets...

Can you check whether you see the same errors in the previous beta? (3.7.4)
Are you using git? You can switch back to the previous beta with:

Code: Select all

git checkout b328a91ddcf8bb5916d1638bd7642a6b54179153

then test Dashticz. The owm widgets probably will show an empty button.

Switch back to the latest beta with:

Code: Select all

git checkout beta

[Lokonli]

Working !!

Is it possible the limt the amout of days ? 8 days is to much data for my width and makes the widget very small (not readable)
and change the colors ? Like a black background instead of white

Customization is rather limited. You can choose on of the other layouts, but for daily forecast you always will receive 8 days.
https://dashticz.readthedocs.io/en/beta ... owmwidgets

You can try to find the CSS styles by right click->inspect. Probably you can adjust the colors via custom.css

When I've time I'll finalize the update of the 'old' weather_owm module.

[RuudP1987]

'currentweather_big_owm' is working you wrote, so your OWM config settings must be ok ...

Can you open DevTools (F12), and post the errors that are reported on the console tab? (I guess there will be something ...)

Code: Select all

XML-parsefout: ongedefinieerde entiteit
Locatie: http://192.168.1.2:8082/tpl/news_modal.tpl
Regelnummer 5, kolom 93: news_modal.tpl:5:93
XML-parsefout: onjuist gevormd
Locatie: http://192.168.1.2:8082/tpl/garbage_1.tpl
Regelnummer 3, kolom 35: garbage_1.tpl:3:35
XML-parsefout: troep na documentelement
Locatie: http://192.168.1.2:8082/tpl/graph_tooltip.tpl
Regelnummer 16, kolom 1:

There seems to be something wrong with loading the template files (*.tpl) on your system.
What kind of system do you have? Which http server do you use for Dashticz?

But this should not be caused by the new OWM widgets...

Can you check whether you see the same errors in the previous beta? (3.7.4)
Are you using git? You can switch back to the previous beta with:

Code: Select all

git checkout b328a91ddcf8bb5916d1638bd7642a6b54179153

then test Dashticz. The owm widgets probably will show an empty button.

Switch back to the latest beta with:

Code: Select all

git checkout beta

The checkout gives an error

Code: Select all

fatal: reference is not a tree: b328a91ddcf8bb5916d1638bd7642a6b54179153

I am running on a new raspberry 4 (Linux raspberrypi 5.10.11-v7l+) and installed Dashticz by its by automatic script. Apache is running as webserver.

[RuudP1987]

@Lokonli, any solution for a fix?

[Vomera]

Styling issue air quality block. I mention it also on 3.7.3 because i was running on that version. Updated to 3.7.5 and still the issue. Maybe its not coded yet. See post at: viewtopic.php?p=270138#p270138

[pvklink]

hi @lokonli
I am almost ready with my alarm system.

At the moment i am programming the Armed Home situation.
The Armed Away is already working.

I like to full screen my wall tablet when enabling Arm home OR Arm Away

In the doc it says that i can enable full screen by:
config['security_panel_lock'] = 1; --away
config['security_panel_lock'] = 2; --home

and disable it with config['security_panel_lock'] = 0; --disable

But how to adress both situations ?
I like to have a full screen in both ARM HOME and AWAY situations ..
suggestion: config['security_panel_lock'] = 3; --home and away

[Lokonli]

hi @lokonli
I am almost ready with my alarm system.

At the moment i am programming the Armed Home situation.
The Armed Away is already working.

I like to full screen my wall tablet when enabling Arm home OR Arm Away

In the doc it says that i can enable full screen by:
config['security_panel_lock'] = 1; --away
config['security_panel_lock'] = 2; --home

and disable it with config['security_panel_lock'] = 0; --disable

But how to adress both situations ?
I like to have a full screen in both ARM HOME and AWAY situations ..
suggestion: config['security_panel_lock'] = 3; --home and away

If I remember correctly with 2 it will be full screen in Armed home as well as Armed Away mode. Did you try already?

[pvklink]

ok, will try it and give feedback

[pvklink]

Works Great!
Thanks !
Perhaps small change to the doc

My alarm system works awsome! Sensors, motion detection, cams,
only part is the geo part that must be changed, IFTTT gives the event far( 5minutes) to late, but thats another topic

I will play with the secpanel part to flash when device changes and when its maximized...
Keep up the good work, my security is GREATTTTT

[pvklink]

And the flashing of the secpanel also works perfect!

[sammyke007]

@Lokonli, is there any way to disable the "animation" in the "decorated" secpanel?
No need to code it, but maybe there's already a hidden parameter available?

I guess it's called the "digitdisplay"?

Something I can disable with one of the custom files?

I'm almost sure it's this animation?

Code: Select all

.text-strobe {
  background: linear-gradient(to right, #e72a3a 10%, #fff 50%, #5bdaff 60%);
  background-size: auto auto;
  background-clip: border-box;
  background-size: 200% auto;
  background-clip: text;
  -webkit-background-clip: text;
  -webkit-text-fill-color: transparent;
  animation: textclip 1.5s linear infinite;
}
@keyframes textclip {
  to {
    background-position: 200% center;
  }
}

Will this work after adding to custom.css?

Code: Select all

.sec-frame .text-strobe {
  background: red;
  animation: none;
}

or

Code: Select all

.text-strobe {
  background: red;
  animation: none;
}

3.7.5 is running fine, tnx for the update once again!

[Lokonli]

@Lokonli, is there any way to disable the "animation" in the "decorated" secpanel?
No need to code it, but maybe there's already a hidden parameter available?

I guess it's called the "digitdisplay"?

Something I can disable with one of the custom files?

I'm almost sure it's this animation?

Code: Select all

.text-strobe {
  background: linear-gradient(to right, #e72a3a 10%, #fff 50%, #5bdaff 60%);
  background-size: auto auto;
  background-clip: border-box;
  background-size: 200% auto;
  background-clip: text;
  -webkit-background-clip: text;
  -webkit-text-fill-color: transparent;
  animation: textclip 1.5s linear infinite;
}
@keyframes textclip {
  to {
    background-position: 200% center;
  }
}

Will this work after adding to custom.css?

Code: Select all

.sec-frame .text-strobe {
  background: red;
  animation: none;
}

or

Code: Select all

.text-strobe {
  background: red;
  animation: none;
}

3.7.5 is running fine, tnx for the update once again!

Did you already try to set the block parameter 'decorate' to false?
https://dashticz.readthedocs.io/en/beta ... panel.html

[sammyke007]

@Lokonli, is there any way to disable the "animation" in the "decorated" secpanel?
No need to code it, but maybe there's already a hidden parameter available?

I guess it's called the "digitdisplay"?

Something I can disable with one of the custom files?

I'm almost sure it's this animation?

Code: Select all

.text-strobe {
  background: linear-gradient(to right, #e72a3a 10%, #fff 50%, #5bdaff 60%);
  background-size: auto auto;
  background-clip: border-box;
  background-size: 200% auto;
  background-clip: text;
  -webkit-background-clip: text;
  -webkit-text-fill-color: transparent;
  animation: textclip 1.5s linear infinite;
}
@keyframes textclip {
  to {
    background-position: 200% center;
  }
}

Will this work after adding to custom.css?

Code: Select all

.sec-frame .text-strobe {
  background: red;
  animation: none;
}

or

Code: Select all

.text-strobe {
  background: red;
  animation: none;
}

3.7.5 is running fine, tnx for the update once again!

Did you already try to set the block parameter 'decorate' to false?
https://dashticz.readthedocs.io/en/beta ... panel.html

Yes, I do read manuals .
I's just that I like the decorated style, but without animations.
I was already able to make the shield icon to stop spinning, so I guess that the above code works. Will try later today.

[pvklink]

I am excited about using the dials, they look great and can combine/replace different "old" parts.

I have three blocks for an irrigation item times 6 for my all my irrigation zones, total 18 devices., 3 for a zone
One for duration watering, one for the schema, on for puting it directly on or off
see: viewtopic.php?p=269920#p269920

Is it possible with the current dial functionality to make a combined dial with
1. Outerring needle to set the duration (0,1, 5, 10,20,30,60 minutes, also selector parts of an idx)
2. Inner part toe select a schema by selector value of a idx
3. Push button part by clicking the black part in the inner circle, on/of of a idx ?

All three parts are there, but not combined, it it possible to create this, would be great (for me )!

[pvklink]

I can't get switch to work for the longfonds block
I changed the value from true to false, but nothing happens

Code: Select all

blocks['longfonds'] = {
	zipcode: '2543BA',
	title: 'Luchtkwaliteit',
        switch: true,
	housenumber: '25',
        width: 4,
}